®
LRD 737
Operating Guide
Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Feature Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Speed Detection Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Radar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Included with Your Radar Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Helpful Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting the Windshield Mounting Clip . . . . . . . . . . . . . . . . . . . . 9
Mounting to the Windshield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Replacing the Fuse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Memory Retention Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Full Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Audio Alert Only Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Visual Alert Only Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Auto Mute Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
City Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LED Signal Strength Meter in City Mode. . . . . . . . . . . . . . . . . . . 17
Safety Warning System Operation . . . . . . . . . . . . . . . . . . . . . . . . 17
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Optional Accessories & Replacement Parts . . . . . . . . . . . . . . . . . . . . . 21
Features, Specifications, and availability of Optional Accessories are all
subject to change without notice.
®
Uniden is a registered trademark of Uniden America Corporation.
One Year Limited Warranty
Important: Evidence of original purchase is required for
warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail
owner, this Uniden Product to be free from defects in materials and craftsmanship with
only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be
of no further effect 12 months after the date of original retail sale. The warranty is
invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits, subassemblies, or any con-
figurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by
someone other than an authorized Uniden service center for a defect or malfunction
covered by this warranty, (E) used in any conjunction with equipment or parts or as
part of any system not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the Operating Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will repair the defect
and return it to you without charge for parts, service, or any other cost (except ship-
ping and handling) incurred by warrantor or its representatives in connection with the
performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NA-
TURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE RE-
IMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of incidental or con-
sequential damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state. This warranty is void outside the
United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in this Operating Guide you are certain that the Product is
defective, pack the Product carefully (preferably in its original packaging). Include
evidence of original purchase and a note describing the defect that has caused you to
return it. The Product should be shipped freight prepaid by traceable means, or deliv-
ered, to warrantor at:
Uniden America Corporation
Customer Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(800) 297-1023, 7:00 a.m. to 7:00 p.m. Central Time, Monday through Friday
Covered under one or more of the following U.S. patents:
4,622,553 4,698,632 4,709,407 4,791,420
4,831,498 5,315,302 5,469,287 5,579,012
5,835,052
®
©1999 Uniden America Corporation. All rights reserved.
Printed in the Philippines
USZZ01074ZZ
Introduction
Welcome to the world of sophisticated, early warning laser/radar detection.
You have purchased one of the most advanced laser/radar detectors
available. The LRD 737 is a completely integrated laser/radar detector.
It responds to the X-, K-, and Ka-SuperWideband radar guns in use today
and also provides front/rear laser detection of the latest speed monitoring
system — the laser gun. The built-in Safety Warning System (SWS™) is
capable of detecting a hazardous warning signal transmitted on the K-band.
The LRD 737 provides distinct visual and audio alerts to warn you of the
presence of X-, K-, and Ka-SuperWideband radar signals as well as IR
laser signals. You can drive with confidence when you bring along
the LRD 737.
The LRD 737 employs V.C.O. (Voltage Controlled Oscillator) and
E.D.I.T. (Electronic Data Interference Terminator) circuitry, giving more
reliable performance.
The E.D.I.T. circuitry filters out unwanted microwave signals and
prevents certain falsing.
We are certain that you will enjoy the LRD 737, and to ensure that you
get the most from its features, please read this Operating Guide carefully
before installing and operating the unit.
Feature Highlights
• Front/Rear Laser Detection
• Complete 6-Band Coverage
• Super Wideband
• Memory Retention Feature
• Safety Warning System™
• 6 Alarm Tones
• K/Ka Priority
• Pulse Detection
• Signal Strength Meter
• Visual/Audio Only Mode
• City and Highway Modes
• Warning Lights
• Auto Mute Mode
• Self Test
1
Speed Detection Systems
A speed detection device (often called a radar gun) sends out either a
microwave signal or beam of light. When this signal reaches its target,
part of the signal is reflected or bounced back toward the emitting gun.
The time required for the signal to leave the gun, bounce off an object,
and return is used to determine a vehicle’s distance and speed.
Radar
Radar (Radio Detection and Ranging) is a microwave system for
detecting the speed of moving objects by reflected pulses of high
frequency radio waves. There are 3 radar bands (microwave frequencies):
Xband (10.49 to 10.56GHz), Kband (24.04 to 24.26GHz), and the
“superwide” Ka band (33.4 GHz to 36 GHz).
The X band was the first used for traffic, followed by the K band which is
harder to detect (most instant-on radar is K band). The Ka band was
introduced in 1987, and widened to Ka SuperWideband in 1990 by the
FCC. The LRD 737 monitors all current radar bands including the entire
Ka SuperWideband.
The radar beam is cone shaped — the narrower the beam, the greater the
resolution. A moving vehicle reflects radar signals back towards the radar
gun. The LRD 737 can detect the signals emitted by radar guns, and it
will sound an audio alarm and flash a warning indicator.
For continuously transmitting radar, use the LRD 737 to get accurate
detection from a safe distance. Weak signals cause the audio and visual
alarms to sound intermittently, but as the signal gets stronger (the closer
you get to the radar gun), both alarms increase in intensity.
Instant-on transmitters fire a short radar pulse beam at a vehicle and
instantly read its speed. When detected at a distance, you will hear a few
beeps and see the strength meter begin to light. Instant-On radar signals
are the most difficult to detect at a safe distance because they are
transmitted only when directed at you or at a vehicle directly ahead
of you.
2
Laser
The Laser Speed Detection System, also called LIDAR (for Light
Detection and Ranging), uses a laser gun that emits infrared light pulses
just outside the spectrum of visible light. Each reflected pulse measures
the speed of the object coming toward or going away from the laser gun.
There are two Laser signals: Laser and Laser 2.
Unlike radar, the laser gun emits a very narrow beam of light, so it can
pinpoint a speeding car within traffic. The infrared beam spreads out, but
slowly and over a longer distance than a radar signal.
The laser gun can acquire a speed reading as quickly as 0.3 seconds,
sometimes less. However, since it isn’t easy to accurately aim at and hit a
moving target, an operator often moves the laser gun in several directions
to get a reading. So laser signals are emitted continuously for a few
seconds for each speed measurement. The LRD 737 can detect these light
pulses from as far away as 1.5 miles, which is about four times the
effective range of a laser gun (2,000 feet), and about ten times its average
operating range (500-800 feet).
Note: To be safe, do not ignore any warnings. Although there are other
types of radar signals that may cause interference, when the
LRD 737 detects a signal, be on the alert. It is important to
exercise caution at all times.
3
Included with Your Radar Detector
Windshield
Operating Guide
Clip
Printed Material
Fuses and
Straight Power Cord
Spare Parts
If any of these items are missing or damaged, contact your dealer
immediately. Be sure to complete and mail the Product Registration Card.
4
Controls and Functions
2
2
1
9
5
6
8
3
4
7
1.
2.
3.
Clip Release — Press the clip release button to remove the
LRD 737 from the windshield mounting clip.
Rear and front Laser Detector Lense — For rear and front
detection of laser signals.
City Button — Press the city button to help reduce X-band false
alarms while driving in the city. When you turn on the City Mode,
the City indicator turns on. While driving on highways, turn off
the City Mode for long-range detection.
4.
5.
Audio Button — Press the audio button to activate the Audio Alert
Only operation. P, C, and M LEDs dim, and the other LEDs are
disabled.
Note: To operate with visual alert only, set the volume control to
the minimum. Remember though, that if the volume control is
turned down and Audio Only operation is selected, the alarm
features are completely disabled.
Mute Button — Press the mute button to activate the Auto Mute
feature, which produces a full alert level when a signal is first
received, then automatically reduces the volume for the rest of the
warning.
5
6.
DC 13.8V Power Input — Connect the DC power cord here.
Note: Use only a Uniden® supplied power cord or its
replacement.
7.
8.
9.
LED Display — LEDs display visual alerts, signal strength, and
operation mode.
On-Off/Volume Control — Turns the power on and adjusts the
Audio Alert volume.
Speaker — Sounds audio alert. There are six different audio alert
tones to distinguish each type of signal received. When you
become familiar with all the distinct alert tones, you can operate
the LRD 737 just by listening, devoting your full attention to the
traffic in front of you.
6
1.
2.
Radar Signal Indicator — A yellow LED under the R lights to
indicate the presence of an X, K, or Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert for each type of signal is also heard.
Laser Signal Indicator — A red LED under L/L2 lights and blinks
to indicate the presence of a laser signal. An amber LED under
L/L2 lights and blinks to indicate the L2 laser signal from an
UltraLyte laser gun. A distinct audio alerts for each laser signal
are also heard.
3.
SWS Signal Indicator — When an early warning hazard or
informational signal is detected, the yellow SWS LED lights. A
distinct audio alert is also heard.
4.
5.
6.
7.
Power-On Indicator — A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
LED Signal Strength Meter — Three LEDs give an accurate
visual indication of the strength of radar or laser signals.
City Mode Indicator — A green LED under C lights to indicate
that you selected City Mode.
Auto Mute Indicator — A red LED under M lights to indicate that
you selected the Auto Mute feature.
Note: Every time you turn on the LRD 737, a self-test is performed for
all LEDs and Alert tones. You will hear inorder six distinct tones
for the X-, K-, and Ka-SuperWideband radar bands, as well as
for laser, laser 2 and safety warning system (SWS).
7
Installation
The LRD 737 uses a highly sensitive horn-type antenna and IR laser
sensor to receive radar/laser signals. Its sensitivity and range depend on
the method of installation and the direction of the antenna/sensor in
relation to the signal source. The inherent nature of radar waves makes
them reflect off metallic surfaces. This is why these waves are so useful
for measuring the speed of a vehicle. The IR laser light may reflect only
from shiny surfaces. Both radar waves and IR laser light will, however,
pass through plastic or glass.
Before you decide where to put your radar detector, please keep in mind
these two important factors:
• For safety, do not mount the LRD 737 in a location where it will
obstruct your driving vision.
• Most vehicles have the top part of the windshield tinted. Mounting
the LRD 737 behind tinted or mirrored glass may reduce the
effectiveness of laser detection by reducing the amount of laser light
received by the Detector.
Helpful Tips
The antenna and the forward looking
laser sensor are located at the rear
panel of the unit, (and the
rear-looking laser sensor is located
on top of the unit), directly behind
the mode selection keys. The antenna
and sensors should not be obstructed
by metal or metallic surfaces and
should be pointed at the horizon for
accurate long-range detection.
• Do not mount the unit behind the windshield wiper blades, radio
antenna, tinted glass area, or mirrored glass. Be sure the unit is free
from obstruction by seat backs, rear view mirror, sun visors, or the
ceiling of the automobile.
• Do not mount the unit in front of the heater or defroster vents.
• Do not leave the unit in direct sunlight or in the glove compartment
of a closed car for long periods of time, as extreme changes in
temperature may cause internal damage. Also, removing the unit
from the windshield makes you less susceptible to break-in
and theft.
8
Adjusting the Windshield Mounting Clip
1.
2.
The metal portion of the bracket locks into the plastic portion at
three different positions. These positions can be used for vehicles
with different vertical angles of their windshields. The back
position can be used for vehicles with windshields that are
slanted back.
For optimum laser detection, carefully bend the angled portion of
the windshield mounting bracket so that the LRD 737 is parallel to
the road surface. Be sure the LRD 737 is mounted so it is free of
obstructions from seat backs, rear view mirror, sun visors, or the
ceiling of the automobile.
9
Mounting to the Windshield
To mount the LRD 737:
1.
Press and hold the clip release button and insert the windshield clip
into the LRD 737. Release the button at the appropriate position.
2.
Place the bracket and the LRD 737 in the proper location on the
windshield of your vehicle, and press the suction cups firmly
against the windshield.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
Connecting the Power
The LRD 737 is designed to operate on most 13.8 VDC negative ground
vehicle electrical systems. The power cord provided with the unit has a
cigarette lighter socket plug at one end and a small connector at the other.
1.
Insert the small connector into the jack on the side of the unit.
2.
Insert the other end into the cigarette lighter socket of your
vehicle.
When installing the power cord, make sure that:
• The socket is clean to allow proper contact.
• The power cord does not block the antenna area on the back of
the unit.
Your unit also comes with power cord mounting clips. You can use these
clips to attach the power cord to the window frame or other parts of the
vehicle, keeping it neat and out of the way. Use the double-sided foam
tape squares to attach each clip. Slip the power cord into the clip to hold
it securely in place.
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Replacing the Fuse
The cigarette lighter plug contains a 1-ampere fuse to protect it from
power surges.
1.
To replace the fuse,
unscrew the top of the plug.
2.
Remove the fuse and
replace it with the
same type.
3.
To replace the top, push in
the two metal contacts and
twist into place.
Note: Your LRD 737 comes with an extra fuse.
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
Operation
You are now ready to enjoy the convenience and security of your
LRD 737. Please read this section of the Operating Guide carefully to
familiarize yourself with the basic operation of this unit.
Power On
Turn the volume control to switch on the power. When you power up the
LRD 737, it performs a self-test of all its circuits. This test takes several
seconds, during which you will hear the different alarm tones and see all
the LEDs. First, you will hear the X-band alarm while the (R)adar,
(P)ower and signal strength LEDs light. It is best to adjust the audible
alarm during the self-test. Next you’ll hear the K-band,
Ka-SuperWideband, Laser, S.W.S., and Laser 2 alarms, each for 1
second, while the (C)ity, (M)ute, (L)aser, S.W.S. and (L)aser (2) LEDs
light. (The power LED remains on until you turn off the unit.) When
turned on, the LRD737 always returns to its last setting.
After the LRD 737 confirms proper operation, the alert tones and all
LEDs, except the green Power LED, turn off. If the Power LED does not
light, check the cigarette lighter socket connection. If the unit turns on
and off intermittently, or the alert tone sounds too often for no reason,
check the power cord connection at both ends to be sure it is not loose.
Volume Control
Adjust the volume control to
a comfortable alarm tone
level for your vehicle. The
volume level does not have
any effect on the unit’s
sensitivity.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
Memory Retention Feature
The Memory Retention Feature retains the LRD737’s operational settings
in memory for at least 2 days without power. When you turn on the
LRD737, it will be in the same mode as when you turned it off.
Full Warning
When the LRD 737 detects a radar, laser, or safety warning signal, it
emits a distinct warning tone and the corresponding alert LEDs
(
R, L/L2, or SWS) will light and blink. The blink rate of the LEDs increases
and the signal strength meter LEDs light successively as the signal source
comes closer.
Audio Alert Only Operation
Press the audio button for Audio Alert Only operation.
When Audio Alert Only is selected, the visual alert and signal strength
meter are disabled. In this mode, all lighted LEDs will dim. Press the
audio button again for the Full Alert (audio and visual) Mode.
(Do not set the volume control at minimum when in Audio Alert Only
because there will be no alert.)
Note: The audio alert tones for the 3 radar bands, 2 laser systems and
Safety Warning System are all different.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
Visual Alert Only Operation
You can operate the LRD 737 in Visual Alert Only by setting the volume
control at the minimum position in Full Alert Mode. At this setting you
can barely hear the audio alert in a quiet environment. Be sure that the
Audio Alert Only indicator is off.
Auto Mute Operation
Press the mute button to activate the Auto Mute feature.
When the Mute indicator is selected, the unit is in Auto Mute Mode. In
this mode you hear the full audio alert when a signal is first received. The
audio alert automatically reduces the volume for the duration of the
warning.
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
City Operation
In highly populated areas, you may encounter many devices that use the
same frequencies as radar signals, such as motion detectors, automatic
doors, and intrusion alarms. These devices may trigger an alert called
“falsing.”
To filter most of the weaker signals and get the most accurate radar signal
recognition, press city to turn on the City Mode.
The City indicator lights.
In City Mode, the combination of visual and audio alert tones varies
based on the strength of the received signal.
Note: If you use both Audio Only Alert and City modes, you won’t receive
an audible alert until you are very close to the radar source.
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
LED Signal Strength Meter in City Mode
The LED signal strength meter gives you instant information about the
strength of the signal being detected. A weak signal causes the first LED
to light, but as signal strength increases, more LEDs light. All three LEDs
light when full signal strength is received. Use this meter to judge the
distance from the signal source.
Signal Strength
X
K,
Laser (Red) and
Ka-SuperWideB Laser2 (Amber)
and and SWS
●❍❍
●●❍
●●●
Visual
Visual/Audio
Visual/Audio
Visual/Audio
Visual/Audio
Visual/Audio
Visual/Audio
Visual/Audio
Visual/Audio
Safety Warning System Operation
The Safety Warning System (SWS™) is a new communication system
that will provide an early warning when a road hazard exists. The
LRD 737 is capable of detecting the SWS signal broadcast on the K-band
by either law enforcement or local departments of transportation. The
yellow SWS LED lights, while an audible alert sounds. When this alert
sounds, you should tune to local radio traffic reports or prepare to slow
down or stop your vehicle because you could be approaching an accident,
bad road conditions caused by weather, or road crews or construction.
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
Care and Maintenance
The LRD 737 is designed to give you years of trouble-free service. There
are no user-serviceable parts inside, and, except for the fuse, no
maintenance is required. To keep your detector in new condition, follow
these important suggestions:
• Never leave the LRD 737 on the windshield when you park your
vehicle. The temperature in the vehicle in summer can reach levels
above what is considered to be safe for this unit.
• To make you less susceptible to break-in and theft, remove the unit
from your windshield when you leave your vehicle.
• Do not expose the unit to moisture. Rain, dew, road splash, or other
liquids can damage the internal components and reduce sensitivity
of the LRD 737.
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
Troubleshooting
If your LRD 737 does not perform up to expectations, try the suggestions
listed below. If you cannot get satisfactory results, call the Uniden
Customer Service Center at (800) 297-1023, 7:00 a.m. to 7:00 p.m.
Central Time, Monday through Friday.
Unit does not operate:
(Power LED not on)
• Check the power cord. Be sure the connectors
are properly installed.
• Be sure ignition key is ON or in the accessory
position.
• Fuse out. Check and replace.
• Make sure that no vehicle electrical problem
exist.
• Make sure that the volume control is in the ON
position.
Unit fails the self test.
Weak detection.
• Call Uniden Customer Service Center,
(800) 297-1023.
• Check angle of unit. Point to the horizon.
• Antenna/Sensor is obstructed. Relocate the unit
clear of any obstruction outside the windshield,
such as a wiper blade.
• Relocate the unit clear of the window tint.
Inaccurate or erratic
detection:
• Loose power cord.
Check both connectors.
• Power cord is broken. Check and replace.
Beeps over bumps or
rough road.
• Check that the power cord is connected at both
ends.
Beeps at same location.
• Falsing because you have passed a motion
sensor or alarm.
Signal strength meter
registers, but no audio.
• For highway use, make sure the City Mode is
OFF.
• Increase the volume.
The unit bounces against
the windshield.
• Reposition so that the bumpers are firmly seated
against the windshield.
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
Specifications
General
Dimensions:
3
in. (W) x 4 in. (D) x in. (H)
Weight:
3.5 oz.
Power Requirements:
Temperature Range:
13.8 VDC
Operating: -5°F to 160°F (-20°C to 70°C)
Storage: -40°F to 185°F (-40°C to 85°C)
Front/Rear Laser Detector
Receiver Type:
Sensor Front End:
Detector Type:
Receiver Bandwidth:
Spectral Response:
Alert Hold Time:
Pulse Laser Signal Receiver
Convex Condenser Lens
Pulse Width Discriminator
30 MHz
800 - 1100 nm
3 seconds
Radar Detector
Receiver Type:
Double Conversion Superheterodyne
Self-Contained Antenna
Detector Type:
Antenna Type:
Sensitivity:
Scanning Frequency Discriminator
Linear polarized, E vector vertical
X band = -114 dBm/cm2
K band = -104 dBm/cm2
Ka SuperWideband = -100 dBm/cm2
10.490 - 10.560 GHz (X band)
24.040 - 24.260 GHz (K band)
33.40 - 36.00 GHz (Ka SuperWideband)
Frequency of Operation:
Specifications are subject to change without notice.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
Optional Accessories & Replacement Parts
Operating Guide
Windshield Clip
Part#: UCZZ01074ZZ
Part#: Suction Clip-GTEC431041B
Clip-HBCT354844Z
Straight Power Cord
Fuses and Spare Parts
Part#: BWZY015001
(WZ-1015 1700 WP)
Part#:Fuse- BFSY0039109 (FS-039) or
BFSY0014109 (FS-014)
Magic Tape-RETC490291Z
Double Sided Tape-RETC490042Z
Cord Cramp-GETC490028Z
Uniden Parts Department (800) 554-3988
Hours : M-F 8:30 AM to 5:00 PM CST.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
|