Uniden Cordless Telephone UH 050XR User Manual

UH-050XR  
Operating  
Guide  
 
CONTENTS  
Introduction  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Technical Support & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Included in your UH-050XR Package . . . . . . . . . . . . . . . . . . . . . . 3  
Getting Started  
Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Attaching the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Charging the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Battery Charge Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Operation  
Power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Selecting Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Squelch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
To Transmit and Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Using Repeater Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
To Operate UH-050XR in Duplex Mode. . . . . . . . . . . . . . . . . . . . 10  
Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Open Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Group Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Programming Scan Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Priority Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Drop-Out Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Power Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Keypad Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Battery Level Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
UHF Channels and Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Controls & Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
ii  
 
INTRODUCTION  
The UH-050XR is a portable two-way UHF-CB radio. It is compact,  
rugged and fits easily in your hand. This hand held UHF radio will give  
you consistent, outstanding performance in virtually all conditions and  
situations. To ensure that you get the most from the  
UH-050XR’s features, please read this operating guide carefully before  
using the unit.  
FEATURES  
40 Channels  
5W/1W Switchable RF Output Power  
LCD Display  
Duplex Capability  
Group Scan  
Open Scan  
Monitor  
LCD and Keypad Back Light  
Auto Power Save  
Battery Level Indicator  
Battery Charge Indicator  
Built in Keypad Lock  
1
 
TECHNICAL SUPPORT AND SERVICE  
Should you find it desirable or necessary to service your UH-050XR, we  
suggest you contact the Uniden dealer where you purchase your radio.  
Your dealer will be able to assist you with the complete service  
information.  
If you require service that is within the terms of your warranty, you should  
present a copy of your receipt to your dealer to authenticate your claim.  
If you find it inconvenient to obtain service assistance from a dealer,  
please pack your radio in a suitable packaging that will provide adequate  
protection to your radio. Enclose a note describing the problem, a copy  
of your receipt, and send it prepaid to:  
AUSTRALIA:  
NEW ZEALAND:  
Uniden Australia Pty Ltd  
Customer Service Division  
345 Princes Highway  
Rockdale NSW 2216  
Uniden New Zealand Ltd  
Customer Service Division  
150 Harris Road  
East Tamaki, Auckland  
Ph.  
Fax.  
(02) 9599-3355  
(02) 9599-3278  
Ph.  
Fax.  
(9) 273 8383  
(9) 274 4253  
Toll Free 1300 366 895  
Toll Free 0800 4 UNIDEN  
0800 4 864336  
Caution: Changes or modifications to this product not expressly approved  
by Uniden; or operation of this product in any way other than as detailed  
by this Operating Guide, can void your warranty and authority to operate  
this product.  
2
 
INCLUDED IN YOUR UH-050XR PACKAGE  
UH-050XR  
Antenna  
AC Adaptor (AAD-052S)  
Wrist Strap  
Battery BP-052 (7.2V, 950mAh)  
Operating Guide  
Product Registration Card  
Note: If any of these items are missing from the box, contact your Uniden  
Dealer.  
3
 
GETTING STARTED  
ATTACHING THE ANTENNA  
Attach the antenna to the UH-050XR  
following direction as indicated below. Be  
sure the antenna is firmly seated.  
ATTACHING THE BATTERY PACK  
1. Slide the battery pack onto the bottom  
of the radio.  
OS/GS  
LOCK  
DUP  
UH0-50XR  
2. Use a coin to turn the screw that  
connects the battery pack to the  
UH-050XR. Be sure the battery  
pack fits tightly against the  
UH-050XR body.  
CHARGING THE BATTERY PACK  
Your UHF CB radio is powered by a specially  
designed nickel-cadmium battery pack.  
Before operating the UH-050XR, charge the  
battery pack for 15 hours using the ac  
adaptor provided in this package.  
AC-Power  
Outlet  
4
 
BATTERY CHARGE INDICATOR  
When charging, the CHG icon appears on the  
display.  
Note :  
1. Transmit Operation is disabled when  
UH-050XR is being charged.  
2. A single tone is emitted by the radio and CHG is displayed to indicate  
that it has started charging.  
3. When the battery is totally empty, CHG icon blinks or the display may  
totally disappear, the radio will be unable to receive any signal and all  
the keys are disabled. In this case, it is best to switch OFF the radio to  
help facilitate charging.  
UH-050XR will return to normal operation once enough power level is  
established.  
Note: If you are unable to charge a fully discharged battery, switch OFF the  
radio to avoid further discharging. When possible, recharge the  
batteries for the recommended time period.  
5
 
OPERATION  
When you press any key (except PTT), a short tone sounds.  
See the Controls and Indicators page at the back of this operating  
guide for button and key operations.  
POWER ON/OFF  
To turn the unit ON, rotate the [ON/OFF VOL]  
clockwise until a “click” is heard. A channel  
OFF  
number and battery level should appear on  
the display.  
To turn the unit OFF, rotate the [ON/OFF VOL]  
knob counter-clockwise until a “click” is  
heard. The display will disappear.  
OFF  
VOLUME  
Rotate the [ON/OFF VOL] knob clockwise or  
counter-clockwise to adjust speaker volume to desired listening level.  
Note: If no sound is heard, temporarily unmute the radio by briefly  
rotating the [SQ] until you hear the receiver’s background noise.  
Rotate [ON/OFF VOL] to desired level. When finished, rotate [SQ]  
until noise disappears.  
SELECTING CHANNEL  
OS/GS  
Press [] or [] to select the desired  
channel.  
DUP  
LOCK  
Note: If you press and hold the [] or  
[], channel numbers will scroll  
rapidly.  
6
 
SQUELCH  
The squelch is used to eliminate any annoying background noise when  
there are no signals present.  
Think of squelch as a gate. Turn [SQ] fully  
Strong Signals  
clockwise. This raises the ”Squelch Gate” so  
high that only the very strong signals can get  
Medium Signals  
Weak Signals  
through.  
Noise  
(Make sure to first select a channel not in use  
before setting the squelch in your UH-050XR  
UHF-CB radio.)  
OFF  
Turn [SQ] fully counter clockwise until  
you hear a hiss. This opens the “Squelch  
Gate” so that everything gets through -  
Strong Signals  
Medium Signals  
noise, weak signal, and strong signals.  
Weak Signals  
Noise  
OFF  
To set the “Squelch Gate” to the desired  
Strong Signals  
level, turn [SQ] counter-clockwise until you  
hear noise. Then turn the [SQ] clockwise  
Medium Signals  
Weak Signals  
just until the noise stopped. Now only the  
desired signal can get through.  
Noise  
Note: If an incoming signal is very weak  
there is a possibility that you will have a  
choppy or broken reception, due to the  
sensitivity of the squelch. In this case, simply  
OFF  
rotate the [SQ] clockwise until the weak  
signal is heard clearly.  
7
 
TO TRANSMIT AND RECEIVE  
The UH-050XR uses the 40 UHF-CB Channels. For your reference a list of  
the available channels and corresponding frequencies is printed at the end  
of this manual.  
1. The maximum RF transmit power of  
UH-050XR is 5 watts.  
To switch to low power, press the  
[1/5W]. LOW appears on the LCD.  
OS/GS  
To switch back to higher power, press  
the [1/5W] again. LOW indicator  
DUP  
LOCK  
disappears from the LCD.  
2. Before you transmit, listen for  
activity on the selected channel.  
3. When the channel is clear, press  
and hold the [PTT] to transmit.  
TX appears on the LCD.  
OS/GS  
PTT  
switch  
DUP  
LOCK  
Hold the radio with microphone approximately two inches in front of your  
mouth with the antenna at approximately 45˚ angle away from your head.  
Speak in a clear, normal conversational voice.  
4. When you have finished speaking, release the [PTT] and listen for a  
response. TX indicator then disappears on the LCD.  
The display shows BUSY when a  
transmission is being received by your  
radio.  
8
 
USING A REPEATER CHANNEL  
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters  
will extend the range of your radio and overcome the shielding effect  
caused by solid obstructions.  
In normal Simplex operation, your radio transmits on one particular  
frequency and receives on that same frequency. If there is a barrier  
(i.e. a Tall Building) that partially blocks your transmitted signal, the  
possibility of the other radio receiving the signal is very slim. Valleys,  
metallic structures, etc., tend to act as a screen between radios.  
Standard Operation without the aid of a Repeater Station  
Operation with the aid of a Repeater  
With Duplex operation, the signal coming from your radio is received by  
the Repeater station and then re-transmitted at the same time on another  
channel.  
Your UH-050XR is designed with duplex capability on Channels 1 to 8.  
When any of these channels are set to operate in duplex mode during  
transmission, the UH-050XR automatically sends the signal at a frequency  
30 channels above the original in order to access the repeater station.  
After transmitting, the radio reverts back to its original operating frequency.  
For example:  
1. CH01 is on Duplex Mode  
- will Receive on CH01 but Transmit on CH31  
2. CH02 is on Duplex Mode  
- will Receive on CH02 but Transmit on CH32, etc....  
Refer to Duplex Operating Mode table on the last page.  
9
 
TO OPERATE UH-050XR IN DUPLEX MODE  
Eg. CH01 is being used in your area for  
repeater use.  
Press [DUP] momentarily. The DUP icon  
appears.  
Press [DUP] again to deactivate the duplex  
operation. UH-050XR will return to simplex  
operation.  
SCANNING  
The UH-050XR has two types of scanning; Open Scanning (OS) and  
Group Scanning (GS), giving you flexibility and allowing you to use the  
radio more effectively.  
Scanning allows you to search for active channels programmed in the OS  
or GS memory.  
To initiate scanning,  
1. Assuming the unit is on CH17 when  
switched on.  
2. Press [SCAN] and scanning starts.  
Scan icon flashes during scanning  
OS/GS  
1. Open Scan (OS) Mode (the absence of GS icon indicates that the  
unit is on OS mode)  
Allows continuous scanning of channels stored in the Open Scan (OS)  
memory. If an active channel is found, scanning will stop on that channel.  
Note: The factory has preprogrammed all the 40 UHF channels into the  
Open Scan channel memory. However, you can change or customise  
the channels by following the steps on programming Scan Channels  
on page 12.  
Example. CH40 becomes active  
If the received signal cease, the unit will wait for at least 3 seconds for  
the signal to return, otherwise scanning resumes.  
To skip the active channel, press [MEM] momentarily. Scanning resumes.  
To deactivate SCAN, press the [SCAN] or [PTT].  
10  
 
Note:  
1. If SCAN is deactivated while in an active channel, the UH-050XR will stay  
on that active channel. If no other channels are active, the UH-050XR  
will reinstate the starting channel.  
2. Pressing [OS/GS] will switch to Group Scanning.  
2. Group Scan (GS) Mode  
Allows you to monitor a Priority Channel while scanning.  
To use GS Mode Scanning, press the [OS/GS]  
key. GS icon appears on the display.  
GS Scanning checks the Priority channel  
activity regularly.  
OS/GS  
If the Priority channel becomes active the  
radio will stay on that channel for as long  
as the signal is present. If the received  
signal ceases, Priority scanning continues  
after 3 seconds.  
If scanning stops on a channel which is not a Priority Channel UH-050XR  
will continue monitoring the Priority Channel for activity while listening to  
the active one.  
To deactivate SCAN, press the [SCAN]  
or [PTT].  
OS/GS  
Note:  
1. If SCAN is deactivated while it is tuned to  
DUP  
LOCK  
an active channel, the UH-050XR will  
stay on that active channel. If none of the channels are active, the UH-  
050XR will reinstate the Priority channel.  
2. If GS Scanning is initiated when there are no channels programmed in  
GS memory, an error tone will be heard and scanning will not start.  
3. Pressing [OS/GS] will switch to Open Scanning.  
11  
 
Programming Scan Channels  
1. Select which Scanning Mode you wish  
to use on the channel  
OS or GS Mode  
OS/GS  
LOCK  
Note: OS is indicated by the absence of  
the GS icon  
DUP  
2. Select the channel you want to store  
by pressing [] or []  
3. Press and hold [MEM] for 1.5 secs. to  
store. MEM icon appears and two  
successive beeps are heard.  
OS/GS  
4. To remove the channel from Memory,  
press and hold [MEM] for 1.5 secs.  
once more. Two successive beeps are  
heard and the MEM icon disappears.  
DUP  
LOCK  
PRIORITY CHANNEL  
The Priority Channel feature allows user to monitor one of 40 channels  
in the UH-050XR, monitoring it every 1.5secs during Group Scanning.  
Choosing a Priority Channel  
The starting channel, when Group Scanning is initiated, is always the  
Priority Channel. To change the priority channel setting while scanning,  
(eg. PRI Channel is CH17 (476.825 MHz))  
a. press [], to select a higher channel  
(scanning pauses)  
or  
b. press [], to select a lower channel  
DROP-OUT DELAY  
While scanning, the UH-050XR stops at a busy channel and receives a  
transmission. When the received signal is over, the unit will wait for 3  
seconds for the return of the signal, otherwise, the radio resumes scanning.  
12  
 
POWER SAVE  
Battery Save feature extends the battery life  
by switching the receiver circuit power ON  
and OFF. This feature automatically activates  
during stand by mode (RX mode without  
signal). A flashing  
icon will appear on  
the display when the battery save feature is ON. It turns OFF  
automatically when a signal is present, and activates again 3secs after  
channel inactivity.  
BACK LIGHTING  
The Liquid Crystal Display (LCD) and function keys are backlit for easy  
viewing at night or in low light situations. The back lighting automatically  
switches ON every time a key (except PTT) is pressed. It turns OFF 5secs  
after the last key is pressed.  
KEYPAD LOCK  
To prevent accidental entries, you can  
lock the keypad.  
Press and hold the [LOCK] button until it  
OS/GS  
beeps to activate Key Lock.  
appears.  
icon  
DUP  
LOCK  
To unlock the keypad, press and hold the  
[LOCK] button again. icon disappears.  
Note: When the Key Lock is active, a warning beep will be heard if you  
attempt to press the keys.  
MONITOR  
This feature enables users to listen in for  
weak signals on the current channel at the  
press of a button.  
To use monitor,  
For brief listening, press [MON]  
For continuous listening. Press and hold  
[MON] for 2 sec. A two tone beep will be  
heard and the receiver circuit will stay  
open letting in both the noise & weak  
signals.  
Display shows MON and BUSY icons.  
To return to normal receive mode press  
[MON], [SCAN], [PTT] [] or [].  
13  
 
BATTERY LEVEL DISPLAY  
The  
icon in the top right hand corner of the screen indicates the  
UH-050XR current battery voltage level at all times. The battery level is  
displayed in 4 levels:  
LEVEL 4  
Battery 100% full  
LEVEL 3  
Battery approx 50% capacity  
LEVEL 2  
Low Battery  
LEVEL 1 (flashing)  
Empty Battery  
Note:  
TX  
When [PTT] SW is pressed at  
Level Empty, battery icon and  
channel number will flash  
14  
 
UHF CHANNELS & FREQUENCIES  
Ch.  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
Freq.  
Usage  
Ch.  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
Freq.  
Usage  
476.425  
476.450  
476.475  
476.500  
Simplex/Duplex  
Simplex/Duplex  
Simplex/Duplex  
Simplex/Duplex  
476.925  
476.950  
476.975  
477.000  
477.025  
477.050  
477.075  
477.100  
477.125  
477.150  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
*476. 525 Simplex/Duplex  
476.550  
476.575  
476.600  
476.625  
476.650  
#476.675  
Simplex/Duplex  
Simplex/Duplex  
Simplex/Duplex  
Repeater  
Repeater  
Back-up  
Emergency Channel  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
477.175  
477.200  
477.225  
477.250  
477.275  
477.300  
477.325  
477.350  
477.375  
477.400  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
Simplex  
12  
13  
14  
15  
16  
17  
18  
19  
20  
476.700  
476.725  
476.750  
476.775  
476.800  
476.825  
476.850  
476.875  
476.900  
Repeater  
Repeater  
Repeater  
Repeater  
Repeater  
Repeater  
Repeater  
Repeater  
Repeater  
* Emergency calling for both simplex and duplex operation  
Please do not use this channel in non-emergency cases.  
# Back-up Emergency Channel  
OPTIONAL ACCESSORIES  
Battery Eliminator (BE-050)  
Standard Headset Microphone (HM-050)  
Speaker Microphone (SM-050)  
Cigarette Lighter Charger (CL-050)  
Battery (BP-052)  
AC Adaptor (AAD-052S)  
15  
 
SPECIFICATIONS  
General  
Channels  
Transmit 40 (with Duplex Channel Support)  
Receive 40  
Oper. Temp.  
Antenna  
0˚C - +55˚C  
Flexible Whip  
Microphone  
Display  
Speaker  
Built-in Electret type  
Liquid Crystal Display  
81 Watt  
Power Source  
BP-052  
Rechargeable Nickel-cadmium  
Battery Pack  
950mAh, 7.2V  
Size  
Weight  
(without antenna) 150(H) x 55(W) x 40(D)mm  
450g (with Antenna & Battery Pack)  
Transmitter  
Frequency Control  
Frequency Range  
Frequency Stability  
Power Output  
Spurious Emissions  
Current Drain  
Phase Locked Loop  
476.425 to 477.4 MHz  
6 ppm  
5W (high)/ 1W (low)  
-65 dBc  
1500mA (High)/650mA (low)  
Receiver  
Receiver Type  
Dual Conversion  
Super Heterodyne  
Phase Locked Loop  
System for Local Oscillator  
476.425 to 477.4 MHz  
0.22 µV  
Frequency Range  
Sensitivity @  
12 dB SINAD  
Squelch Sensitivity  
Audio Frequency  
Response  
0.19 µV (Threshold)  
500Hz, 4.5dB  
(ref: 1KHz, 3KHz Dev.) 2000Hz, -6.5dB  
Adjacent Channel  
Selectivity  
55 dB  
Hum & Noise Ratio  
Audio Output Drain  
Current Drain  
40 dB  
0.3W (10% THD)  
Squelched  
35 mA  
Max.Audio 150 mA  
16  
 
Charger  
Std. Power Supply  
AAD-052S  
Input  
230~240V AC, 50Hz  
9V, 210 mA  
Output  
Approval No. V/00031  
Specifications shown are typical and subject to change without notice.  
17  
 
WARRANTY  
UNIDEN UH-050XR UHF CB RADIO  
Australian One Year Warranty  
Note: Please keep your sales docket as it provides evidence of  
warranty.  
Warrantor: Uniden Australia Pty Limited ACN 001 865 498  
Elements of Warranty: Uniden warrants to the original retail owner for the  
duration of this warranty, its UH-050XR UHF CB Transreceiver Radio (hereinafter  
referred to as the Product) to be free from defects in materials and craftsmanship  
with only the limitations or exclusions set out below.  
Warranty Duration: This warranty to the original retail owner only, shall  
terminate and be of no further effect ONE (1) Year after the date of original retail  
sale. This warranty will be deemed invalid if the product is; (A) Damaged or not  
maintained as reasonable and necessary, (B) Modified, altered or used as part of  
any conversion kits, subassemblies, or any configurations not sold by Uniden, (C)  
Improperly installed, (D) Repaired by someone other than an authorised Uniden  
Repair Agent for a defect or malfunction covered by this warranty, (E) Used in  
conjunction with any equipment or parts or as part of a system not  
manufactured by Uniden, (F) Installed, programmed or serviced by anyone other  
than an authorised Uniden Repair Agent, or (G) Where the Serial Number label  
of the product has been removed or damaged beyond recognition.  
Parts Covered: This warranty covers for 1 year, the UHF CB Transceiver Unit  
only. All accessories: AC Adaptor, Wrist Strap, Battery and Antenna are covered  
for 90 days.  
Statement of Remedy: In the event that the product does not conform to this  
warranty at any time while this warranty is in effect, the warrantor at its  
discretion, will repair the defect or replace the product and return it to you  
without charge for parts and service. This warranty does not cover provide for  
the reimbursement or payment of incidental or consequential damages.  
Warranty card: If a warranty card has been included with this product, please  
fill it in and return it to us within 14 days of purchase. Your name and serial  
number of the product will then be registered in our database and this will help  
us process your claim with greater speed and efficiency should you require  
warranty service.  
Procedure for obtaining performance or warranty: In the event that the  
Product does not conform to this warranty, the Product should be shipped or  
delivered, freight prepaid, with evidence of original purchase, (eg. a copy of the  
sales docket, to the warrantor at:  
UNIDEN AUSTRALIA PTY LIMITED  
Service Division  
345 Princes Highway, Rockdale, NSW 2216  
Ph (02) 9599 3100 Toll Free 1300 366 895 Fax (02) 9599 3278  
UNIDEN NEW ZEALAND LTD  
Service Division  
150 Harris Road, East Tamaki, Auckland  
Ph (9) 273 8383 Fax (9) 274 4253 Toll Free 0800 4 UNIDEN  
0800 4 864996  
Customers in other states should ship or deliver the Product freight pre-paid to  
the nearest Uniden Authorised Repair Centre. (Contact Uniden for the Warranty  
Agent nearest you.)  
18  
 
CONTROLS & INDICATORS  
MIC SPKR  
15  
SQ  
VOL  
OFF  
1
14  
13  
3
12  
16  
17  
18  
11  
SCAN  
MEM  
DUP  
OS/GS  
1/5W  
10  
9
LOCK  
4
CHG  
DC9V  
5
8
7
6
2
UH-050XR  
19  
 
O
N
M
L
K
A
B
C
D
E
J
F
G
H
I
A. Transmit  
I. Channel Numbers  
J. Battery Level Indicator  
K. Charging  
B. 1W Power  
C. Duplex Transmit  
D. Scanning  
E. Monitor  
L. Key Lock  
M. Power Save  
N. Memory  
F. Priority  
G. Busy Channel Lock Out  
H. Group Scanning  
O. Receive  
1. Antenna  
2. Belt Clip  
11. OS/GS  
12. LCD Display  
13. On/Off Volume Key  
14. Squelch Key  
15. Speaker Mic Jack Cover  
16. Scan  
3. PTT (Push-to-talk) Switch  
4. Monitor Switch  
5. Charging Jack  
6. Charging Jack Cover  
7. Battery  
17. Memory Key  
18. Duplex  
8. Speaker  
9. Lock Key  
10. 1/5W Key  
20  
 
© 2000 Uniden Australia Pty Limited/Uniden New Zealand Limited  
Part Code UTZZ01872AZ  
 

Telex Projector High Frequency Projector User Manual
TiVo DVR SDOC 00102 001 User Manual
Toshiba Telephone Strata DK User Manual
Trango Broadband Stereo System AD2401 24 User Manual
Tripp Lite Switch B119 302 R User Manual
Tripp Lite TV Cables N001 025 BK R User Manual
Ultimate Products Boiler PF Series User Manual
Uniden Two Way Radio uh064sx 2 User Manual
UTStarcom Cell Phone CDM 105 User Manual
Vizio Flat Panel Television E291IA1 User Manual