Uniden Cordless Telephone DXI5586 2 User Manual

 
Congratulations on your purchase of the Uniden dual handset cordless telephone. This  
cordless phone is designed and engineered to exacting standards for reliability, long life,  
and outstanding performance.  
Welcome  
Features  
Note: Illustrations in this manual are used for explanation purposes. Some  
illustrations in this manual may differ from the actual unit. The color  
of your cordless telephone may vary.  
• 5.8GHz Extended Range Technology  
• Dual Handset System  
• Last Number Redial  
• Voice Mail Waiting Indicator  
• Tone/Pulse Dialing  
(Extra Handset & Charger Included)  
• Call Transfer from Handset to Handset  
• Caller ID/Caller ID on Call Waiting  
• 3-Line Backlit LCD  
• Page/Find Handset Key  
• Earpiece/Ringer Volume Controls  
• Mute or Turn Ringer Off  
• Hearing Aid Compatible  
• 20 Channel Auto Scan  
• Desk or Wall Mountable  
• Trilingual Menu Displays  
• 30 Caller ID Memory  
• 10 Number Memory Dialing  
If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-1023,  
Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)  
For more information on Uniden products and accessories, be sure to visit our web site:  
®
Uniden is a registered trademark of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of  
Uniden America Corporation.  
www.uniden.com  
WELCOME/FEATURES  
 
[ 3 ]  
Controls and Functions  
1. Handset antenna  
2. Beltclip hole  
1
3. Jack for optional headset  
4. Handset ringer speaker  
5. Handset battery compartment  
6. Handset earpiece  
6
7. LCD display  
2
8. M (volume & scroll down) key  
9. Call id (Caller ID)/menu key  
10.  
/tone/  
(left cursor) key  
7
11. Redial/pause key  
12. Select/channel key  
13. L (volume & scroll up) key  
14. End key  
3
4
8
9
13  
14  
15  
15. Talk/flash key  
16. #/  
(right cursor) key  
17. Memory key  
5
18. Delete/transfer key  
19. Handset microphone  
20. Handset charging contacts  
10  
11  
16  
17  
18  
12  
19  
20  
[ 4 ]  
CONTROLS AND FUNCTIONS  
 
www.uniden.com  
Main Base  
21. Main base charging contacts  
22. Find hs key  
23. Charge/in use and VMWI  
(Voice Mail Waiting Indicator) LED  
24. Telephone line jack  
25. DC IN 9V jack  
26. Charging contacts  
27. Charge LED  
24  
25  
21  
22  
23  
28. DC IN 9V jack  
Extra Charging Cradle (for Second Handset)  
28  
26  
27  
www.uniden.com  
CONTROLS AND FUNCTIONS  
 
[ 5 ]  
Terms Used in this Manual  
Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has  
not been pressed and there is no dial tone.  
Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone.  
CID - Caller ID  
CIDCW - Caller ID on Call Waiting  
Accessibility  
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need  
customer service assistance or if you have any questions about how Uniden's products accommodate  
persons with disabilities, please call the accessibility voice/TTY line:  
1-800-874-9314  
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a  
under the "Accessibility" link.  
[ 6 ]  
TERMS USED IN THIS MANUAL / ACCESSIBILITY  
 
www.uniden.com  
Installing the Phone  
Do the following steps:  
A. Choose the Best Location  
B. Install the Rechargeable Battery Packs into the Handsets  
C. Connect the Main Base and Charging Cradle, and Charge the Handsets  
D. Mount the Main Base on a Wall  
If your home has  
specially wired alarm  
equipment connected to  
the telephone line, be  
sure that installing the  
system does not disable  
your alarm equipment.  
A. Choose the Best Location  
Before choosing a location for your new phone, here are some important guidelines  
you should consider:  
Avoid heat sources, such as radiators,  
air ducts, and sunlight  
Avoid noise sources such as a window  
by a street with heavy traffic  
Avoid television sets and other  
electronic equipment  
Avoid microwave ovens  
If you have questions  
about what will disable  
your alarm equipment,  
contact your telephone  
company or a qualified  
installer.  
Avoid excessive moisture,  
extremely low temperatures,  
dust, mechanical vibration,  
or shock  
Choose a central location  
Avoid personal computers  
Avoid other cordless telephones  
The location should be close to both a phone jack and a continuous power outlet  
(one which is not connected to a switch).  
The main base and each handset should be kept away from sources of electrical  
noise such as motors, microwave ovens, and fluorescent lighting.  
The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate.  
For better reception, place the main base as high as possible.  
The main base should be placed in an open area for optimum range and reception.  
www.uniden.com  
INSTALLING THE PHONE  
[ 7 ]  
 
B. Install the Rechargeable Battery Packs into the  
Handsets  
Both handsets are powered by rechargeable battery packs.  
The battery recharges automatically when the handset is  
placed in the main base or charging cradle.  
Use only the Uniden  
(BT-905) rechargeable  
battery pack supplied  
with your phone.  
1) Press down on the handset battery case cover (use the  
finger indention for a better grip) and slide the cover  
downward to remove.  
2) Plug the battery pack connector (red & black wires) into  
the small jack inside the battery compartment.  
(The connector notches fit into the grooves of the jack only  
one-way.) Match the wire colors to the polarity label in the  
battery compartment, connect the battery, and listen for  
a click to insure connection.  
3) Make sure you have a good connection by slightly pulling  
on the battery wires. If the connection is secure, the  
battery jack will remain in place.  
4) Place the battery case cover back in the handset by sliding  
it upwards until it clicks into place.  
[ 8 ]  
INSTALLING THE PHONE  
www.uniden.com  
 
C. Connect the Main Base and Charging Cradle, and Charge the Handsets  
1) Connect each AC adapter to the DC IN 9V  
jack and to each standard 120V AC wall  
outlet.  
Use only the supplied  
AD-314 AC adapter  
for the main base and  
AD-310 or AD-1010  
for the charging  
cradle.  
2) Place one handset in the main base and  
the other in the charging cradle with the  
keypad facing forward.  
3) Make sure that the charge/in use LED and  
charge LED illuminate. If the LED does not  
illuminate, check to see that the AC  
Do not use any other  
AC adapter.  
adapter is plugged in and that the handset makes good  
contact with the cradle's charging contacts.  
Do not place the power  
cord where it creates a  
trip hazard or where it  
could become chafed  
and create a fire or  
Connect the AC adapter to a continuous power supply.  
Place each cradle close to the AC outlet to avoid long extension cords.  
electrical hazard.  
4) Charge your handsets at least 15-20 hours before  
plugging the phone line.  
www.uniden.com  
INSTALLING THE PHONE  
 
[ 9 ]  
5) Once the handset battery packs are fully  
charged, connect the telephone line cord to  
the TEL LINE jack and a telephone outlet.  
If your telephone outlet isn't modular,  
contact your telephone company for  
assistance.  
Modular  
[ 10 ] INSTALLING THE PHONE  
 
www.uniden.com  
D. Mount the Main Base on a Wall  
Standard wall plate mounting  
This phone can be mounted on any standard wall  
plate.  
1) Plug the AC adapter to the DC IN 9V jack.  
2) Route the AC adapter cord through the molded  
wiring channel as shown.  
3) Plug the AC adapter into a standard 120V AC  
wall outlet.  
4) Plug the telephone line cord into the TEL  
LINE jack.  
5) Plug the telephone line cord into the  
telephone outlet.  
6) Align the mounting slots on the main base  
with the mounting posts on the wall. Then  
push in and down until the phone is firmly  
seated.  
www.uniden.com  
INSTALLING THE PHONE [ 11 ]  
 
Direct wall mounting  
If you don't have a standard wall plate, you can mount your phone  
directly to the wall. Before doing this, consider the following:  
Avoid electrical cables, pipes, or other items behind the  
mounting location that could cause a hazard when inserting  
screws into the wall.  
Try to mount your phone within 5 feet of a working phone jack  
to avoid excessive lengths.  
Make sure the wall material is capable of supporting the weight  
of the main base and handset.  
Use #10 screws (minimum length of 1-3/8 inches) with anchoring  
devices suitable for the wall material where the main base will  
be placed.  
1) Insert two mounting screws into the wall (with their appropriate anchoring  
device), 3-15/16 inches apart.  
Allow about 1/8 of an inch between the wall and screw heads for mounting the  
phone.  
2) Refer to steps 1 through 6 on page 11 to mount the telephone.  
Installing the Beltclip  
To attach the beltclip  
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.  
To remove the beltclip  
Pull both sides of the beltclip to release the tabs from the holes.  
[ 12 ] INSTALLING THE PHONE  
 
www.uniden.com  
Headset Installation  
Your phone may be used with an optional headset. To use this feature,  
insert the headset plug into the headset jack.  
Your phone is ready for hands-free conversations.  
or by calling our Parts Department. See page 35.)  
Register Handsets to the Main Base before Using!  
Whichever handset you choose to charge in the main base will automatically register  
to the main base.  
The second handset (charging in the extra charging cradle) MUST also be registered  
to the main base before use. Follow the steps below to register the second handset.  
When you charge the  
handsets, Caller ID  
summary screen and  
the name of the  
handset, HS1 appears.  
If HS2appears, you  
are charging the  
1) Be sure both handsets are fully charged.  
2) Remove the handset from the charging cradle, and place it in the main base. The  
charge/in use LED light on the main base will begin to flash, indicating that the  
registration is taking place.  
handset No. 2.  
3) Wait for at least 5 seconds, then remove the handset from the main base.  
4) Press the find hs key on the main base. If both handsets beep, registration is  
complete. If one handset does not beep, re-register that handset.  
5) Once both handsets are registered, it doesnt matter which handset is placed in  
The charging cradle  
can be used to charge  
either handset.  
the main base or the charging cradle.  
www.uniden.com  
INSTALLING THE PHONE [ 13 ]  
 
When to Re-register Handsets  
1) Youll need to re-register the second handset (follow steps on page 13) each time  
the digital security code is changed. Refer to page 32 for details regarding the  
Digital Security Code.  
2) When there is a power failure for more than one hour:  
Make sure to return the  
handsets to the cradles  
after each phone call.  
If power failure occurs (e.g. due to electrical storm or if the unit is unplugged  
during a move), both handsets will need to be re-registered. To re-register, follow  
the same registration process on page 13.  
3) If the second handsets battery becomes very low, the handset must be recharged  
for 15-20 hours and re-registered to the main base unit.  
[ 14 ] WHEN T O RE-REGISTER HANDSETS  
 
www.uniden.com  
Basic Setup  
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID  
on Call Waiting), Area Code, Dial Mode and Language.  
CIDCW and Dial Mode options can only be set by using Handset  
1. If you try to set by using Handset 2, you will not see these  
options listed on the LCD screen. (Headset 1 shows HS1 in the  
display while the phone is charging.) AutoTalk, Area Code and  
Language options can be set by using either Handset 1 or Handset 2.  
Activating AutoTalk  
AutoTalk allows you to answer the phone simply by removing the handset from the  
cradle. You do not have to press any keys.  
1) When the phone is in standby mode, press and hold the  
call id/menu key. The following screen appears.  
2) Press the select/channel key to turn AutoTalk on.  
3) Press the end key to complete the setting. The handset returns to standby mode.  
Activating Caller ID on Call Waiting  
Caller ID allows you to see the name and number of the calling party before you  
answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and  
number of a call that comes in when you are on the line.  
You must subscribe to Caller ID service through your local  
telephone provider to use this feature.  
1) When the phone is in standby mode, press and hold the  
call id/menu key. The following screen appears.  
2) Press the M key to select CIDCW.  
www.uniden.com  
BASIC SETUP [ 15 ]  
 
3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting.  
4) Press the end key and return the handset to the main base to complete the  
setting. The handset returns to standby mode.  
Entering Your Area Code  
If you can make a call by dialing only 7 digits (instead of 10), you can program your  
local area code in your phone. If you get a call from within your area code, you'll  
only see the 7-digit phone number. If you get a call from outside your area code,  
you'll see all 10 digits.  
1) When the phone is in standby mode, press and hold the  
call id/menu key. The following screen appears.  
2) Press the M key twice to select Area Code.  
3) Press the select/channel key. If an area code was already  
stored, the phone will display it.  
4) Use the number keys (0 - 9) to enter the 3-digit area code.  
If you make an error, use the delete/transfer key to back-  
space.  
5) Press the select/channel key. A confirmation tone sounds.  
6) Press the end key to complete the setting. The handset returns to standby mode.  
If your phone system  
requires pulse dialing  
and you need to send  
the DTMF tones during a  
call, you can temporarily  
switch over to tone  
dialing. (Refer to "Tone  
Dialing Switch-over" on  
page 20.)  
Choosing the Dialing Mode  
Your phone can communicate with the telephone network in two different ways: tone  
dialing and pulse dialing. These days, most phone networks use a method called tone  
dialing, so your phone comes programmed for tone dialing.  
If your phone company uses pulse dialing, you'll need to change your phone's dial  
mode. There's an easy way to tell: try making a call. If your call connects, your  
phone's setting is fine. If not, follow the steps below:  
[ 16 ] BASIC SETUP  
www.uniden.com  
 
1) When the phone is in standby mode, press and hold the  
call id/menu key. The following screen appears.  
2) Press the M key three times to select Dial.  
3) Press the select/channel key to set the phone to pulse  
dialing.  
4) Press the end key and return the handset to the main base to complete the  
setting. The handset returns to standby mode.  
Setting the Language  
You can change the language the menu display uses. Choose from English, French, or  
Spanish.  
1) When the phone is in standby mode, Press and hold the  
call id/menu key. The following screen appears.  
2) Press the M key four times to select Language.  
3) Press the select/channel key to select Eng, Fr. or Esp.  
4) Press the end key to complete the setting.  
The handset returns to standby mode.  
Selecting the Ring Tone and Volume  
Your phone has five different ringer tone/volume combinations you can choose from.  
1) With the phone in standby mode, press the L or M key.  
2) The phone will sound the different ring tones at different volumes. To turn the  
ringer off, select Ringer Off.  
3) When the phone sounds the ring tone and volume you wish to use, press the end key.  
www.uniden.com  
BASIC SETUP [ 17 ]  
 
Using Your Phone  
Making and Receiving Calls  
Making a call  
1) Remove the handset from the cradle.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Dial the number.  
OR  
1) Remove the handset from the cradle.  
2) Dial the number.  
3) Press the talk/flash key.  
Receiving a call  
To turn on the AutoTalk  
feature, see "Activating  
AutoTalk" on page 15.  
1) Remove the handset from the cradle. (If AutoTalk is on, the phone will  
automatically answer the call when you pick it up.)  
2) Press the talk/flash key.  
OR  
1) If the handset is off the cradle, press the talk/flash,  
/tone/ , #/  
or any  
number key. (AutoTalk is on.)  
Hanging up  
Press the end key or return the handset to the cradle.  
[ 18 ] USING YOUR PHONE  
 
www.uniden.com  
Transferring a Call  
Your cordless phone allows you to transfer outside calls from handset to handset,  
only one handset at a time can talk with an outside caller. The second handset  
cannot go off hook to listen to conversations or make an outgoing call while the  
other handset is in use.  
To transfer a call  
1) During a call, press the delete/transfer key. The call will  
automatically be placed on hold and the transfer tone sounds.  
2) When the other handset receives the call, the transfer tone stops.  
To cancel the transfer and return to the caller, press the delete/transfer or talk/flash  
key on the handset.  
If you transfer a call  
and it is not picked up  
after 5 minutes, the call  
will be disconnected.  
To receive a transfer call (from the second handset)  
Pick up the handset from the cradle (when AutoTalk is set to  
on), or pick up the handset and press the talk/flash key to  
answer the transferred call. Additionally, you can answer the transferred call by  
pressing any number key, the  
/tone/  
or #/  
key (when AutoTalk is set to on).  
Redialing the Last Dialed Number  
1) Remove the handset from the cradle.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Press the redial/pause key.  
OR  
1) Remove the handset from the cradle.  
2) Press the redial/pause key.  
3) Press the talk/flash key.  
www.uniden.com  
USING YOUR PHONE [ 19 ]  
 
Adjusting the Earpiece Volume  
To change the earpiece volume, press the L or M key during a  
call.  
You can only mute the  
handset ringer if the  
handset is off the cradle  
when the phone starts  
ringing.  
Temporarily Mute Ringer  
If the handset is off the cradle while an incoming call is  
ringing, simply press the end key to mute the incoming ring.  
The ringer will sound with the next incoming call.  
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you can  
switch over to tone dialing after the call connects.  
This feature is useful when you need tone dialing to use  
automated such as telephone bank tellers, telephone  
prescription refills, customer support menus,etc.  
If your phone is set to pulse dialing mode, make your call normally. Once your call  
connects, press the  
/tone/  
key. Any digits you enter from then on will be sent  
as tone digits. When this particular call ends, the phone automatically returns to  
pulse dialing mode.  
[ 20 ] USING YOUR PHONE  
 
www.uniden.com  
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your main base, noise  
increases. If you pass the range limits of the main base, your call will terminate  
within one minute.  
TM  
The UltraClear Plus  
true compander circuitry  
virtually eliminates  
background noise. This  
innovative technology,  
together with 20  
different channels,  
provides you with the  
best possible reception  
during all your  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the  
phone´s channel for clear operation. While using your phone, press the  
select/channel key. Scanning appears on the display, indicating the phone is  
changing to another channel. For more information on interference, refer to "Radio  
Interference" on page 41.  
conversations.  
Find Handset  
To locate the handset, press the find hs key on the main base.  
The handsets beep for 60 seconds.  
To cancel paging, press any key on either handset or the find  
hs key on the main base.  
Paging is also canceled when the phone receives an incoming  
call.  
www.uniden.com  
USING YOUR PHONE [ 21 ]  
 
Using Call Waiting  
If you have Call Waiting, you can receive calls while on the line.  
1) If a call comes in while you are on the phone, you will  
hear a call waiting tone. If you have CIDCW activated,  
you will see the name and number of the incoming  
caller.  
2) Press the talk/flash key to accept the waiting call.  
After a short pause, you will hear the new caller.  
3) To return to the original caller, press the talk/flash  
key again.  
You must subscribe to Call Waiting through your local telephone company.  
Voice Mail Waiting Indicator  
If you subscribe to voice mail service, you can use your cordless telephone to access  
your voice mailbox. The charge/in use LED on the main base of your phone flashes  
whenever you have messages waiting in your voice mailbox.  
You must subscribe to  
voice mail service from  
your telephone company  
in order to use this  
feature. The voice mail  
company will provide  
you with the access  
number.  
Just dial the access number supplied by your voice mail provider to enter your  
mailbox.  
You can program your voice mail access number to a speed dial number.  
If the voice mail waiting indicator remains on after you have retrieved your  
messages, press and hold the find hs key for 5 seconds. This will reset the indicator.  
[ 22 ] USING YOUR PHONE  
 
www.uniden.com  
Using the Speed Dial Memory  
The speed dial memory allows you to store up to 10 names and numbers in each  
handset. You can dial these numbers with just a few key presses.  
The speed dial memory is not limited to phone numbers. You can store any number  
(up to 20 digits) that you need to enter once your call connects. This is referred to  
as Chain Dialing. For example, you can save your bank account number to speed dial  
memory. When you call your bank's telephone teller service and are prompted to  
enter your account number, simply press the memory key and the speed dial number  
where you stored your account number. Then press the select/channel key.  
When editing the speed  
dial memory, you must  
press a key within 30  
seconds or the phone  
will return to standby  
mode. If you return the  
handset to the cradle,  
the phone will return to  
standby mode also.  
Storing Names and Numbers in Speed Dial Memory  
1) With the phone in standby mode, press the memory key.  
Select Memory  
01  
2) Enter 0-9 to select the speed dial number where you would  
02 JOHN DOE  
like to store this entry. You can also scroll through the list  
with the L and M keys. Press the select/channel key twice.  
3) Store Name appears and a cursor flashes indicating that the  
phone is ready for the name to be entered.  
Store Name  
If the selected speed dial number is already assigned, the  
Edit screen appears. You can select Edit to edit this entry,  
select Delete to erase this entry, or select Go Back to  
choose another speed dial number.  
Edit Memory01  
Delete Memory01  
Go Back  
www.uniden.com  
USING THE SPEED DIAL MEMORY [ 23 ]  
 
4) Enter a name according to the instructions below, then press the select/channel  
key. If no name is required, go to step 5.  
The name can be up to 13 characters.  
keys  
to move the cursor to the desired location.  
Use the #/  
and  
/tone/  
Use the delete/transfer key to delete characters as needed.  
Press and hold the delete/transfer key to delete all the characters.  
If the next character  
uses the same number  
key, you must press the  
Refer to the letters on the number keys to select the desired characters.  
With each press of a numeric key, the displayed character appears in the following  
order: upper case letters first, lower case letters next and finally the number  
corresponding to the key.  
#/  
key to move the  
cursor over. Otherwise  
the next time you press  
the number key, it  
changes the character  
that was previously set.  
If you make a mistake while entering a name  
or  
Use the  
/tone/  
#/  
key to move the cursor to the incorrect character.  
Press the delete/transfer key to erase the wrong character. Then enter the correct  
character. To delete all characters, press and hold the delete/transfer key.  
Number of times key is pressed  
For example, to enter Movies.  
keys  
1
2
3
4
5
6
7
8
9
1) Press 6. Then press the #/  
key  
1
A
D
G
J
M
P
T
W
*
1
to move the cursor to the right.  
2) Press 6 six times.  
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
2abc  
3def  
4
4ghi  
5jkl  
3) Press 8 six times.  
5
4) Press 4 six times.  
6mno  
6
5) Press 3 five times.  
6) Press 7 eight times.  
7pqrs  
8tuv  
r
s
7
9
8
y
z
0
9wxyz  
0oper  
(blank)  
[ 24 ] USING THE SPEED DIAL MEMORY  
 
www.uniden.com  
5) Store Number is displayed. The cursor flashes indicating  
Store Number  
that the phone is ready for the number to be entered.  
6) Use the keypad to enter the phone number; each number  
can be up to 20 digits.  
Store Number  
8007303456  
If you need the phone to pause during the dialing sequence,  
press the redial/pause key to insert a two-second delay  
between the numbers. You can enter multiple pauses to  
increase the delay. Each pause counts as a digit. The  
display shows a P for every pause.  
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for  
more than 30 seconds, it will beep rapidly, and the phone will return to standby mode.  
7) Press the memory key. You will hear a confirmation tone,  
Memory01 Stored  
and the following screen appears.  
Memory storage is complete.  
After about 2 seconds, the following screen displays all the  
01 Movies  
02 JOHN DOE  
03 MOM AND DAD  
speed dial memory entries.  
8) Press the end key to exit memory setup mode. The phone  
returns to standby.  
www.uniden.com  
USING THE SPEED DIAL MEMORY [ 25 ]  
 
Storing Caller ID Messages in Speed Dial Memory  
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in  
memory dialing. For instructions on viewing the Caller ID Message list, see page 29.  
1) Press the call id/menu key. Select the phone number to be  
5/17 12:30PM 03  
Jane Smith  
214-555-1234  
stored from the Caller ID list by pressing the L or M key.  
You cannot store a  
Caller ID message if no  
phone number appears  
in the message.  
2) Press the memory key.  
Select Memory  
01  
02 JOHN DOE  
3) Enter a number (0 - 9) or press the L or M key to select the  
memory location to be stored.  
4) Press the select/channel key. You hear a confirmation tone,  
and the number is stored in memory. The display returns to  
the Caller ID list.  
5/17 12:30PM  
Jane Smith  
214-555-1234  
If a number has already been stored in the selected memory  
number location, a confirmation screen is displayed.  
Press the L key to select Yes. Press the select/channel key to  
overwrite. The display returns to the Caller ID list.  
Replace Memory?  
Yes  
No  
[ 26 ] USING THE SPEED DIAL MEMORY  
 
www.uniden.com  
Making Calls from Speed Dial Memory  
1) Press the memory key. The handset displays your programmed  
speed dial number.  
Select Memory  
01 Movies  
02 JOHN DOE  
2) Enter the number (0 - 9), or press the L or M key to select  
the speed dial number you would like to dial.  
3) Press the talk/flash key. Connecting changes to Talk, and  
the volume setting and the number selected appear on the  
display. Then the displayed number is dialed.  
Talk  
07303456  
To cancel speed dialing  
Press the end key to cancel speed dialing. The handset returns to standby mode.  
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone  
returns to standby mode.  
www.uniden.com  
USING THE SPEED DIAL MEMORY [ 27 ]  
 
Caller ID and CIDCW (Caller ID on Call Waiting)  
You must subscribe to Caller ID services through your local telephone provider  
to use these features. When the telephone rings, the Caller ID feature allows you  
to view the caller´s name, phone number, date and time of call. The incoming call  
information is stored in the Caller ID record. If the Caller ID service includes the  
caller´s name, the caller´s name appears on the display (up to 15 letters).  
If you answer a call  
before the Caller ID  
message is received  
(for example, before  
the second ring), the  
Caller ID message will  
not appear.  
The date and  
time received  
5/11 12:30PM  
Jane Smith  
214-555-1234  
Caller's name  
Caller's phone number  
You may receive any one of the following messages:  
When the call is  
received via a  
telephone company  
that does not offer  
Caller ID service, the  
caller´s phone  
When invalid data is received  
When a private name is received  
When a private number is received  
Incomplete Data  
Private Name  
Private Number  
When an unknown name is received Unknown Name  
When an unknown number is received Unknown Number  
number and name  
do not appear.  
(This includes  
international calls.)  
Data errors appear as ¨ ¨.  
When the call is  
received via a private  
branch exchange  
(PBX), the caller´s  
phone number and  
name may not appear.  
[ 28 ] CALLER ID AND CIDCW  
 
www.uniden.com  
Viewing the Caller ID Message List  
The Caller ID list stores information for up to 30 incoming calls - even unanswered  
calls. You can also view the Caller ID list during a call.  
1) Press the call id/menu key.  
In Caller ID operation,  
if no key is pressed for  
more than 30 seconds,  
an error tone sounds  
and the handset returns  
to standby mode.  
The summary screen displays the number of new messages  
and total messages.  
Caller ID  
New :01  
Total:02  
2) Use the M key to scroll through the messages from the  
latest to the earliest, or use the L key to scroll through  
the messages from the earliest to the latest.  
5/17 12:30PM 03  
Jane Smith  
214-555-1234  
Each message can be  
up to 15 characters  
for the name and 15  
digits for the phone  
number.  
3) Press the call id/menu key to return to talk mode, or press  
the  
end key to return to standby mode.  
The number of calls  
from the same Caller  
ID appears next to the  
received time. Once  
you view the new  
message, the number  
will be cleared and  
disappear.  
During a call, don't  
press the end key, or  
the call will be  
disconnected.  
www.uniden.com  
CALLER ID AND CIDCW [ 29 ]  
 
Deleting Information from the Caller ID List  
If the phone receives more Caller ID messages than it can store, the oldest one in  
the list is automatically deleted. Caller ID data can also be deleted manually.  
Deleting a Caller ID message  
While using the  
Delete All?or  
Delete Message?  
screen, if no key is  
pressed for more than  
30 seconds, an error  
tone sounds, and the  
handset returns  
1) Press the call id/menu key in standby mode. Find the  
5/17 12:30PM 03  
Jane Smith  
214-555-1234  
the  
message to be deleted from the Caller ID list by pressing  
L or M key.  
Delete Message?  
Yes  
No  
2) Press the delete/transfer key.  
3) Press the L or M key to select Yes, and then press the  
to standby mode.  
select/channel key.  
If you get an  
incoming call or page,  
the deleting operation  
is canceled and you  
can answer the call or  
page.  
Deleting all Caller ID names/numbers  
1) With the phone in standby mode, press the call id/menu key.  
Caller ID  
New :01  
Total:02  
2) Press the delete/transfer key.  
3) Press the L or M key to select Yes, and then press the  
select/channel key.  
Delete All?  
Yes  
No  
You hear a confirmation tone and all stored Caller ID  
messages are deleted.  
Caller ID  
Total:00  
[ 30 ] CALLER ID AND CIDCW  
 
www.uniden.com  
Making a Call from the Caller ID List  
You can place a call from the Caller ID list.  
1) Press the call id/menu key in standby mode. Select the  
phone number that you want to dial by pressing the L or  
M key.  
5/17 12:30PM 03  
Jane Smith  
214-555-1234  
You cannot make a call  
from the Caller ID list if  
your cordless telephone  
is connected to a  
private branch exchange  
(PBX).  
2) To have the phone dial a 1 before the displayed Caller ID  
number, press 1. To have the phone dial the stored area  
code before the displayed Caller ID number, press 3.  
Talk  
2145551234  
3) Press the talk/flash key. The displayed phone number dials  
automatically.  
Caller ID on Call Waiting (CIDCW)  
With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller  
ID data is displayed. To accept the waiting call, press the talk/flash key (see page  
22).  
www.uniden.com  
CALLER ID AND CIDCW [ 31 ]  
 
Changing the Digital Security Code  
To protect you against misbilled calls which might result from your phone being  
activated by other equipment, the cordless phone provides AutoSecureTM (which  
electronically locks your phone when each handset is in the cradle) and Random  
CodeTM digital security which automatically selects one of over 262,000 digital  
security codes for each handset and the main base.  
If the handset battery pack is completely discharged or the battery pack is removed,  
the digital security code will be lost. If this happens, a new security code is set  
automatically the next time the battery pack is charged. In the rare situation that  
you suspect another cordless telephone is using the same security code, you can  
change the code.  
1) Remove the handset from the cradle. Press and hold the find hs key on the main  
base.  
2) While holding the find hs key, place the handset in the main base, and leave the  
handset in the main base for more than 3 seconds.  
3) Remove the handset from the main base. Then place the second handset in the  
main base and wait for more than three seconds. No need to holding the find hs  
key this time.  
4) Press the talk/flash key on one handset. Once you make sure Talk appears on  
the display, press the end key. Then, try with the second handset. If each  
handset displays Talk, a new security code is set. Otherwise, return to step 1  
and try again.  
[ 32 ] CHANGING THE DIGITAL SECURITY CODE  
 
www.uniden.com  
Note on Power Sources  
Low battery alert  
When the battery pack is very low and needs to be charged, the phone is  
programmed to eliminate functions in order to save power. If the phone is not in  
use, Low Battery appears on the LCD and none of the keys will operate.  
If the phone is in use, Low Battery flashes and the handset beeps. Complete  
your conversation as quickly as possible and return the handset to the cradle for  
charging.  
Information stored in the phone's memory will be retained for 30 minutes after the battery pack is removed. This  
includes all setup information, last number dialed, speed dial memory, and the CID list.  
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For  
optimum performance, be sure to return the handset to the cradle after a telephone call.  
Battery replacement and handling  
When the operating time becomes short even after a battery is recharged, please replace the battery.  
With normal usage, your battery should last about one year. A replacement battery may be purchased by  
calling 1-800-554-3988 (Mon - Fri 8 am to 5 pm, CST).  
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use  
the Uniden battery model and Uniden adapter model specifically designated for this product.  
Caution  
Power Failure  
Use only the specified Uniden battery pack (BT-905).  
Do not remove the battery from the handset to charge it.  
Never throw the battery into a fire, disassemble it, or heat it.  
Do not remove or damage the battery casing.  
During the period that the power is off, you will not be able  
to make or receive calls with the telephone.  
www.uniden.com  
NO TE ON POWER SOURCES [ 33 ]  
 
Talk and Standby Times  
With average use, your handset battery provides approximately 6 hours of talk time and approximately 10  
days of standby time. When your handsets are not being used and are left off of their charging cradles,  
the battery will gradually discharge. You can achieve optimum battery life and performance by returning  
the handset to the charging cradle after each use. If the handset is left off of the charging cradle, the  
actual talk time duration will be reduced respective to the amount of time the handset is off of the  
charging cradle.  
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts on  
the handset once a month.  
Dampen a cloth with plain water. Gently rub the damp  
cloth over the charging contacts until all visible dirt is  
removed. Dry the contacts thoroughly before returning the  
handset to the cradle.  
Caution  
Do not use paint thinner, benzene, alcohol, or other  
chemical products. Doing so may discolor the surface  
of the telephone and damage the finish.  
[ 34 ] NO TE ON POWER SOURCES  
 
www.uniden.com  
General Information  
The phone complies with FCC Parts 15 and 68.  
Operating temperature: -10°C to 50°C (+14°F to +122°F)  
AC Adapter Information  
(For the main base)  
AD-314  
120V AC 60Hz  
9V DC 350mA  
(For the charging cradle)  
AC Adapter part number:  
Input Voltage:  
Output Voltage:  
AD-310 or AD-1010  
120V AC 60Hz  
9V DC 210mA  
Battery Information  
Battery part number:  
Capacity:  
BT-905  
600mAh, 3.6V  
Frequency  
925.181-927.451 MHz  
5739.320-5746.130 MHz  
To avoid damage to the phone use only Uniden AD-314, AD-310 or AD-1010 and BT-905 with your phone.  
If the handset is left off the cradle, the actual Talk Mode duration will be reduced respective to the amount of time the handset is  
off the cradle.  
Recharge your phone on a regular basis by returning the handset to either cradle after each phone call.  
When the operating time becomes short, even after the battery is recharged, please replace the battery.  
With normal usage, the battery should last about one year.  
A replacement Uniden adapter or battery may be purchased by calling 1-800-554-3988 (Mon - Fri 8 am to  
5 pm, CST).  
Specifications, features, and availability of optional accessories are all subject to change without prior  
notice.  
www.uniden.com  
GENERAL INFORMATION [ 35 ]  
 
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps first. If these simple steps  
do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm,  
Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)  
Symptom  
Suggestion  
The charge/in use LED or  
charge LED won't illuminate  
when the handset is placed in  
the cradle.  
Make sure the AC adapter is plugged into the cradle and wall outlet.  
Make sure the handset is properly seated in the cradle.  
Make sure the charging contacts on the handsets are clean.  
The audio sounds weak and/or Move the handset and/or main base away from metal objects or appliances and try  
scratchy.  
again.  
Press the select/channel key in the talk mode to help eliminate background noise.  
Make sure that the handset is not too far from the main base.  
Can't make or receive calls.  
Re-register both handsets (see page 13).  
Check both ends of telephone line cord.  
Make sure the AC adapter is plugged into the main base and wall outlet.  
Disconnect the AC adapter for a few minutes, then reconnect it.  
Change the digital security code (see page 32).  
Make sure that the handset is not too far from the main base.  
Check the dialing mode used by your telephone company.  
[ 36 ] TROUBLESHOO TING  
 
www.uniden.com  
Symptom  
Suggestion  
Re-register both handsets (see page 13).  
The handset doesn't ring or  
receive a page.  
The battery pack may be weak. Charge the battery for 15-20 hours.  
The handset may be too far away from the main base.  
Place the main base away from appliances or metal objects.  
Change the digital security code (see page 32).  
Check the battery pack to ensure there is a secure connection.  
Make sure ringer volume isnt set to off.”  
Severe noise interference.  
Keep both handsets away from microwave ovens, computers, remote control toys,  
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,  
and electrical appliances.  
Move the main base to another location or turn off the source of interference.  
The Caller ID does not display.  
The call was answered before the second ring.  
The call was placed through a switchboard.  
Charge the handset.  
Your Caller ID service may not be active; contact your local telephone service  
provider.  
Handset No. 1 or No. 2 is not  
working.  
Make sure the battery pack is connected to the handset and fully charged.  
Re-register the non-functional handset.  
Unavailable message is  
displayed on the LCD screen of  
the handset.  
Make sure the other handset is not already in use. Both handsets cannot be in talk  
mode at the same time.  
Place the handset in the main base for at least 5 seconds to re-register to the  
main base.  
Make sure the handset is not too far from the main base when trying to use.  
www.uniden.com  
TROUBLESHOO TING [ 37 ]  
 
Symptom  
Suggestion  
Re-register both handsets (see page 13).  
The handset doesnt  
communicate with the main  
base or the other handset.  
No 3- way conversation.  
Only one handset at a time can talk with an outside caller. To allow the other hand-  
set to talk to the caller, transfer the call.  
Voice Message Indication does Contact your local telephone company to make sure that your telephone receives  
not work.  
FSK message signaling.  
Reset the indicator by pressing and holding the find hs key for 5 seconds.  
[ 38 ] TROUBLESHOO TING  
 
www.uniden.com  
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the  
following steps.  
Action  
Case  
Wipe off the liquid, and use as normal.  
If the handset or base is exposed to  
moisture or liquid, but it only affects  
the exterior plastic housing.  
Handset:  
If moisture or liquid has entered the  
plastic housing (i.e. liquid can be  
heard in the phone or liquid has  
entered the handset battery  
compartment or vent openings on the  
base).  
1. Remove the battery cover and leave it off for ventilation.  
2. Remove the battery pack by disconnecting.  
3. Leave the battery cover off and the battery pack disconnected for at least 3 days.  
4. Once the phone is completely dry, reconnect the battery pack and the battery cover.  
5. Recharge the handsets battery pack for 20 hours before using again.  
Base:  
1. Disconnect the AC adapter from the base unit, cutting off electrical power.  
2. Disconnect the telephone cord from the base unit.  
3. Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while recharging the battery pack to  
avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will cause permanent  
damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work, please call our  
Customer Service Hotline at 1-800-297-1023.  
www.uniden.com  
TROUBLESHOO TING [ 39 ]  
 
Uniden works to reduce lead content in our PVC coated cords in our  
product and accessories.  
rules and requirements adopted by the ACTA. A compliant telephone  
cord and modular plug is provided with this product. It is designed to  
be connected to a compatible modular jack that is also compliant. See  
installation instructions for details.  
Precautions!  
Before you read anything else, please observe the following:  
Warning!  
Warning!  
The cords on this products and/or accessories contain lead, a chemical  
known to the State of California to cause birth defects or other  
reproductive harm. Wash hands after handling.  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage  
to the unit, DO NOT expose this unit to rain or moisture.  
The REN is used to determine the number of devices that may be  
connected to a telephone line. Excessive RENs on a telephone line may  
result in the devices not ringing in response to an incoming call. In  
most but not all areas, the sum of RENs should not exceed five (5.0). To  
be certain of the number of devices that may be connected to a line, as  
determined by the total RENs, contact the local telephone company. For  
products approved after July 23, 2001, the REN for this product is part  
of the product identifier that has the format US:AAAEQ##TXXXX. The  
digits represented by ## are the REN without a decimal point (e.g., 03  
is a REN of 0.3). For earlier products, the REN is separately shown on  
the label. If this equipment causes harm to the telephone network, the  
telephone company will notify you in advance that temporary  
discontinuance of service may be required. But if advance notice isnt  
practical, the telephone company will notify the customer as soon as  
possible. Also, you will be advised of your right to file a complaint with  
the FCC if you believe it is necessary.  
Rechargeable Nickel-Cadmium Battery Warning  
Important Safety Instructions  
This equipment contains a rechargeable nickel-cadmium battery.  
Cadmium is a chemical known to the State of California to cause  
cancer.  
The rechargeable nickel-cadmium battery contained in this  
equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
Do not charge the rechargeable nickel-cadmium battery used in this  
equipment in any charger other than the one designed to charge  
this battery as specified in the owners manual. Using another  
charger may damage the battery or cause the battery to explode.  
When using your telephone equipment, basic safety precautions should  
always be followed to reduce the risk of fire, electric shock and injury  
to persons, including the following:  
1. Do not use this product near water, for example, near a bath tub,  
wash bowl, kitchen sink or laundry tub, in a wet basement or near a  
swimming pool.  
2. Avoid using a telephone (other than a cordless type) during an  
electrical storm. There may be a remote risk of electric shock from  
lightning.  
3. Do not use the telephone to report a gas leak in the vicinity of the  
leak.  
4. Use only the power cord and batteries indicated in this manual. Do  
not dispose of batteries in a fire. They may explode. Check with local  
codes for possible battery disposal instructions.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
The telephone company may make changes in its facilities, equipment,  
operations or procedures that could affect the operation of the  
equipment. If this happens the telephone company will provide advance  
notice in order for you to make necessary modifications to maintain  
uninterrupted service.  
5. Do not disassemble any component of this product.  
Please follow instructions for repairing, if any (e.g. battery replacement  
section); otherwise do not substitute or repair any parts of the device  
except as specified in this manual.  
Connection to party line service is subject to state tariffs. Contact the  
state public utility commission, public service commission or  
corporation commission for information. This equipment is hearing aid  
compatible.  
SAVE THESE INSTRUCTIONS!  
Uniden voluntarily participates in an RBRC® industry program to  
collect and recycle nickel-cadmium batteries at the end of their  
useful life, when taken out of service within the United States. The  
RBRC® program provides a convenient alternative to placing used  
nickel-cadmium batteries into the trash or municipal waste stream,  
which is illegal in some areas.  
Through the RBRC® program, Uniden makes it easy for you to drop  
off the used battery at local retailers of replacement nickel-cadmium  
batteries. You may also contact your local recycling center for  
information on where to return the used battery. Please call 1-800-  
8-BATTERY for information on Ni-Cd battery recycling in your area.  
Uniden's involvement in this program is part of its commitment to  
protecting our environment and conserving natural resources.  
RBRC® is a registered trademark of the Rechargeable Battery  
Recycling Corporation.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect type. Dispose of  
used batteries according to the instructions. Do not open or mutilate  
the battery, and disconnect the battery before shipping this product.  
The FCC Wants You To Know  
Should you experience trouble with this equipment, please contact  
Uniden customer service at 800-297-1023. If the equipment is causing  
harm to the telephone network, the telephone company may request  
that you disconnect the equipment until the problem is resolved.  
This equipment complies with Part 68 of the FCC rules and the  
requirements adopted by the ACTA. On the bottom of this equipment is  
a label that contains, among other information, a product identifier in  
the format US:AAAEQ##TXXXX. If requested, this number must be  
provided to the telephone company.  
NOTICE: According to telephone company reports, AC electrical surges,  
typically resulting from lightning strikes, are very destructive to  
telephone equipment connected to AC power sources. To minimize  
damage from these types of surges, a surge arrest or is recommended.  
An applicable Universal Service Order Codes (USOC) certification for the  
jacks used in this equipment is provided (i.e., RJ11C) in the packaging  
with each piece of approved terminal equipment.  
A plug and jack used to connect this equipment to the premises wiring  
and telephone network must comply with the applicable FCC Part 68  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
[ 40 ] PRECAUTIONS & WARRANTY  
 
www.uniden.com  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed  
by the owner's manual, could void your authority to operate this  
product.  
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do  
not allow this exclusion or limitation of incidental or consequential  
damages so the above limitation or exclusion may not apply to you.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications between the  
handset and base of your cordless telephone are accomplished by means  
of radio waves which are broadcast over the open airways.  
Because of the inherent physical properties of radio waves, your  
communications can be received by radio receiving devices other than  
your own cordless telephone unit. Consequently, any communications  
using your cordless telephone may not be private.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state. This warranty  
is void outside the United States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner's manual you are certain that  
the Product is defective, pack the Product carefully (preferably in its  
original packaging). Disconnect the battery from the Product and  
separately secure the battery in its own separate packaging within the  
shipping carton. The Product should include all parts and accessories  
originally packaged with the Product.  
This device complies with part 15 of the FCC rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) This device must accept any interference received,  
including interference that may cause undesired operation. Privacy of  
communications, may not be ensured when using this phone.  
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty  
service.  
To insure the safety of users, the FCC has established criteria for the  
amount of radio frequency energy various products may produce  
depending on their intended usage. This product has been tested and  
found to comply with the FCCs exposure criteria. For body worn  
operation, the FCC RF exposure guidelines were also met when used with  
the Uniden accessories supplied or designed for this product. Use of  
other accessories may not ensure compliance with FCC RF exposure  
guidelines and should be avoided.  
Include evidence of original purchase and a note describing the defect  
that has caused you to return it. The Product should be shipped freight  
prepaid, by traceable means, to warrantor at:  
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original  
retail owner, this Uniden Product to be free from defects in materials  
and craftsmanship with only the limitations or exclusions set out below.  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
WARRANTY DURATION: This warranty to the original user shall terminate  
and be of no further effect 12 months after the date of original retail  
sale. The warranty is invalid if the Product is (A) damaged or not  
maintained as reasonable or necessary, (B) modified, altered, or used as  
part of any conversion kits, subassemblies, or any configurations not  
sold by Uniden, (C) improperly installed, (D) serviced or repaired by  
someone other than an authorized Uniden service center for a defect or  
malfunction covered by this warranty, (E) used in any conjunction with  
equipment or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone other than as  
detailed by the owner's manual for this product.  
(800) 297-1023, 7:00 a.m. to 7:00 p.m. CST, Monday through Friday;  
9:00 a.m. through 5:00 p.m. CST, Saturday and Sunday  
(phone support is closed on holidays).  
Radio Interference  
Radio interference may occasionally cause buzzing and humming in your  
cordless handset, or clicking noises in the base. This interference is  
caused by external sources such as TV, refrigerator, vacuum cleaner,  
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If  
these noises continue and are too distracting, please check around your  
home to see what appliances may be causing the problem. In addition,  
we recommend that the base not be plugged into a circuit that also  
powers a major appliance because of the potential for interference. Be  
certain that the antenna on the unit is fully extended when needed.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving radio  
signals from another cordless telephone or other source of interference.  
If you cannot eliminate this type of interference, you need to change to  
a different channel.  
STATEMENT OF REMEDY: In the event that the product does not conform  
to this warranty at any time while this warranty is in effect, warrantor  
will either, at its option, repair or replace the defective unit and return  
it to you without charge for parts, service, or any other cost (except  
shipping and handling) incurred by warrantor or its representatives in  
connection with the performance of this warranty. Warrantor, at its  
option, may replace the unit with a new or refurbished unit. THE  
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE  
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND  
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,  
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,  
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS  
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR  
Finally, it should be noted that some cordless telephones operate at  
frequencies that may cause interference to nearby TVs and VCRs. To  
minimize or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV or VCR. If  
interference is experienced, moving the cordless telephone farther away  
from the TV or VCR will often reduce or eliminate the interference.  
www.uniden.com  
PRECAUTIONS & WARRANTY [ 41 ]  
 
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical  
Specifications. This is confirmed by the registration number. The abbreviation, IC, before the  
registration number signifies that registration was performed based on a Declaration of  
Conformity indicating that Industry Canada technical specifications were met. It does not  
imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment  
itself. The REN assigned to each terminal equipment provides an indication of the maximum  
number of terminals allowed to be connected to a telephone interface. The termination on an  
interface may consist of any combination of devices subject only to the requirement that the  
sum of the Ringer Equivalence Numbers of all the devices does not exceed five.  
RADIO EQUIPMENT  
The term "IC:" before the radio certification number only signifies that Industry Canada technical  
specifications were met.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including interference that may cause undesired operation of  
the device. "Privacy of communications may not be ensured when using this telephone".  
[ 42 ] I. C. NO TICE  
www.uniden.com  
 
Index  
A
E, F, G, H, I, J, K, L  
T, U  
AC adapter information ................35  
Earpiece volume..........................20  
Find handset..............................21  
General information ....................35  
Headset installation ....................13  
I.C. Notice ................................42  
Installing the phone ....................7  
Interference ..............................41  
Liquid damage............................39  
Talk and standby times ................34  
Technical information ..................35  
Tone dialing switch-over ..............20  
Transferring a call ......................19  
Traveling out-of-range ................21  
Troubleshooting..........................36  
B
Basic setup................................15  
Battery pack  
Information ............................35  
Installing ................................8  
Preparing and charging ..............8  
Replacement and handling ........33  
Beltclip installation ....................12  
V, W, X, Y, Z  
Voice mail waiting indicator..........22  
M, N, O, P, Q  
Volume control  
Making a call ............................18  
Handset ............................17, 20  
Wall mounting ............................11  
Warranty ..................................41  
C
Precautions................................40  
Call transfer feature ....................19  
Caller ID service ........................28  
Call waiting ............................22  
Deleting ................................30  
Making a call ..........................31  
Viewing..................................29  
Channel ....................................21  
Charging the battery pack ..............9  
Cleaning contacts ......................34  
Connect the cradle........................9  
Controls and functions ..............4, 5  
R
Receiving a call..........................18  
Redial ......................................19  
Register handsets to the main  
base before using ....................13  
Ringer tone ..............................17  
S
Second handset ..........................13  
Speed dial memory  
Making calls from  
D
speed dial memory ................27  
Storing names and numbers  
in speed dial memory ............23  
Dialing mode..............................16  
Digital security code ..................32  
www.uniden.com  
INDEX [ 43 ]  
 
Memo  
[ 44 ]  
www.uniden.com  
 
Memo  
www.uniden.com  
[ 45 ]  
 
[ 46 ] MEMORY LIST  
 
www.uniden.com  
At Uniden, we'll take care of you!  
Thank you for purchasing a Uniden product. If you have any questions or problems,  
please do not return this product to the place of purchase.  
Having Trouble?  
our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to  
5 p.m. CST. (Phone support is closed on holidays.)  
Need a Part?  
To order headsets, additional handsets, replacement batteries or other accessories, visit our  
Help for our Special Needs Customers  
If you need special assistance due to a disability or have questions on the accessibility  
features of this product, please call 1-800-874-9314 (voice or TTY)  
May be covered under one or more of the following U.S. patents:  
4,797,916  
5,574,727  
5,671,248  
5,768,345  
5,893,034  
5,987,330  
6,418,209  
6,788,953  
6,953,118  
5,426,690  
5,581,598  
5,696,471  
5,787,356  
5,912,968  
6,044,281  
6,618,015  
6,839,550  
7,023,176  
5,434,905  
5,650,790  
5,717,312  
5,794,152  
5,915,227  
6,070,082  
6,671,315  
6,889,184  
5,491,745  
5,660,269  
5,732,355  
5,801,466  
5,929,598  
6,125,277  
6,714,630  
6,901,271  
5,493,605  
5,661,780  
5,754,407  
5,825,161  
5,930,720  
6,253,088  
6,782,098  
6,907,094  
5,533,010  
5,663,981  
5,758,289  
5,864,619  
5,960,358  
6,314,278  
6,788,920  
6,914,940  
Other patents pending.  
 
 

Toastmaster Convection Oven 7093X User Manual
Toastmaster Waffle Iron TWB2WREG User Manual
Toro Vacuum Cleaner 7066 User Manual
Tripp Lite Switch B034 002 R User Manual
Tripp Lite TV Cables B125 101 60 User Manual
Troy Bilt Trimmer SUPER BRONCO TB415CS User Manual
Ultra Products Fan ULT33048 User Manual
United States Stove Air Conditioner 4027 User Manual
VTech Cordless Telephone 9126 User Manual
Vulcan Hart Electric Steamer VSC2 User Manual