Uniden Cordless Telephone DXI4286 2 User Manual

4286-2  
 
Traveling Out-of-Range  
21  
21  
21  
22  
22  
23  
23  
26  
27  
Welcome/Features  
2
3
4
5
Selecting a Different Channel  
Find Handsets  
Controls and Functions  
Terms Used in this Manual  
Accessibility  
Using Call Waiting  
Voice Mail Waiting Indicator  
Using the Speed Dial Memory  
Storing Names and Numbers in Speed Dial Memory  
Storing Caller ID Messages in Speed Dial Memory  
Making Calls from Speed Dial Memory  
Installing the Phone  
6
6
7
A. Choose the Best Location  
B. Install the Rechargeable Battery Packs into the Handsets  
C. Connect the Main Base and Charging Cradle, and Charge  
the Handsets  
8
9
10  
11  
Caller ID and CIDCW (Caller ID on Call  
Waiting)  
D. Mount the Main Base on a Wall  
Installing the Beltclip  
Headset Installation  
Register Handsets to the Main Base  
before Using!  
28  
29  
30  
31  
31  
32  
33  
35  
Viewing the Caller ID Message List  
Deleting Information from the Caller ID List  
Making a Call from the Caller ID List  
Caller ID on Call Waiting (CIDCW)  
12  
13  
Changing the Digital Security Code  
Note on Power Sources  
General Information  
When to Re-register Handsets  
Basic Setup  
14  
14  
14  
15  
16  
17  
17  
Activating AutoTalk  
Activating Caller ID on Call Waiting  
Entering Your Area Code  
Choosing the Dialing Mode  
Setting the Language  
Troubleshooting  
36  
Liquid Damage  
39  
Precautions & Warranty  
I.C. Notice  
40  
42  
43  
45  
Selecting the Ring Tone and Volume  
Using Your Phone  
Making and Receiving Calls  
Transferring a Call  
Redialing the Last Dialed Number  
Adjusting the Earpiece Volume  
Tone Dialing Switch-over  
18  
18  
19  
19  
20  
20  
Index  
Memory List  
w w w . u n i d e n . c o m  
[ 1 ]  
 
Congratulations on your purchase of the Uniden dual handset cordless telephone. This phone is  
designed and engineered to exacting standards for reliability, long life, and outstanding  
performance.  
Welcome  
Features  
Note:Illustrations in this manual are used for explanation purposes. Some  
illustrations in this manual may differ from the actual unit. The color of your  
cordless phone may vary.  
• 2.4GHz Extended Range Technology  
• Dual Handset System  
• Last Number Redial  
• Voice Mail Waiting Indicator  
• Tone/Pulse Dialing  
(Extra Handset & Charger Included)  
• Call Transfer from Handset to Handset  
• Caller ID/Caller ID on Call Waiting  
• 3-Line Backlit LCD  
• Find Handset Key  
• Earpiece/Ringer Volume Controls  
• Mute or Turn Ringer Off  
• Hearing Aid Compatible  
• 20 Channel Auto Scan  
• Desk or Wall Mountable  
• Trilingual Menu Displays  
• 30 Caller ID Memory  
• 10 Number Memory Dialing  
If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-1023,  
Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)  
For more information on Uniden products and accessories, be sure to visit our web site:  
Uniden® is a registered trademark of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of  
Uniden America Corporation.  
w w w . u n i d e n . c o m  
[ 2 ]  
 
   
Controls and Functions  
Handsets  
1. Handset antenna  
2. Jack for optional headset  
3. Beltclip hole  
1
4. Ringer speaker  
5. Handset battery compartment  
6. Handset earpiece  
7. LCD display  
2
3
6
8.  
/
/vol/  
(earpiece volume, ringer  
volume and scroll) key (pages 14, 17 and  
23)  
7
8
9
4
9. Call id/menu key (pages 14 and 28)  
10. /tone/ key (left cursor)  
(pages 20 and 23)  
13  
14  
15  
*
11. Redial/pause key (pages 19 and 25)  
12. Select/channel key (pages 14, 21 and 23)  
13. Talk/flash key (pages 18 and 22)  
14. End key (pages 18 and 20)  
5
16  
17  
10  
11  
15. Memory key (page 23)  
16. #/  
(right cursor) key (page 23)  
18  
17. Delete/transfer key (pages 19 and 30)  
18. Handset microphone  
12  
19. Handset charging contacts  
19  
w w w . u n i d e n . c o m  
[ 3 ] C O N T R O L S & F U N C T I O N S  
 
   
Main Base  
Extra Charging Cradle for Second Handset  
27  
25  
20  
21  
26  
22  
23  
24  
20. Main base charging contacts 23. DC IN 9V jack  
21. Find hs key  
(pages 21 and 32)  
25. Charging contacts  
27. DC IN 9V jack  
24. Telephone line jack 26. Charge LED  
22. Charge/in use and VMWI  
(Voice Mail Waiting Indicator) LED  
Terms Used in this Manual  
• Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has  
not been pressed and there is no dial tone.  
• Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone.  
• CID - Caller ID  
• CIDCW - Caller ID on Call Waiting  
w w w . u n i d e n . c o m  
T E R M S U S E D I N T H I S M A N U A L [ 4 ]  
 
   
Accessibility  
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer  
service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities,  
please call the accessibility voice/TTY line:  
1-800-874-9314  
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and we  
w w w . u n i d e n . c o m  
[ 5 ] A C C E S S I B I L I T Y  
 
 
Installing the Phone  
Do the following steps:  
note  
A. Choose the Best Location  
B. Install the Rechargeable Battery Packs into the Handsets  
C. Connect the Main Base and Charging Cradle, and Charge the Handsets  
D. Mount the Main Base on a Wall  
If your home has  
specially wired alarm  
equipment connected to  
the telephone line, be  
sure that installing the  
system does not disable  
your alarm equipment.  
A. Choose the Best Location  
When choosing a location for your new phone, here are some important guidelines you should consider:  
Avoid heat sources, such as radiators,  
air ducts, and sunlight  
Avoid noise sources such as a window by  
a street with heavy traffic  
Avoid television sets and other  
electronic equipment  
Avoid microwave ovens  
If you have questions  
about what will disable  
your alarm equipment,  
contact your telephone  
company or a qualified  
installer.  
Avoid excessive moisture,  
extremely low temperatures, dust,  
mechanical vibration, or shock  
Choose a central location  
Avoid personal computers  
Avoid other cordless telephones  
• The location should be close to both a phone jack and a continuous power outlet (one  
which is not connected to a switch).  
• The main base and each handset should be kept away from sources of electrical noise such  
as motors, microwave ovens, and fluorescent lighting.  
• The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate. For  
better reception, place the main base as high as possible.  
• The main base should be placed in an open area for optimum range and reception.  
w w w . u n i d e n . c o m  
I N S T A L L I N G T H E P H O N E [ 6 ]  
 
     
B. Install the Rechargeable Battery Packs into the Handsets  
Both handsets are powered by rechargeable battery packs.  
The battery recharges automatically when the handset is  
placed in the main base or charging cradle.  
!
Use only the Uniden  
(BT-905 or BT-1006)  
rechargeable battery  
pack supplied with  
your cordless  
1) Press down on the handset battery case cover (use the  
finger indention for a better grip) and slide the cover  
downward to remove.  
2) Plug the battery pack connector (red & black wires) into the  
jack inside the battery compartment.  
telephone.  
(The connector notches fit into the grooves of the jack only  
one way.) Match the wire colors to the polarity label in the  
battery compartment, connect the battery and listen for a  
click to insure connection.  
3) Make sure you have a good connection by slightly pulling on  
the battery wires. If the connection is secure, the battery  
jack will remain in place.  
4) Place the battery case cover back in the handset by sliding  
it upwards until it clicks into place.  
[ 7 ] I N S T A L L I N G T H E P H O N E  
 
w w w . u n i d e n . c o m  
   
C. Connect the Main Base and Charging Cradle,  
and Charge the Handsets  
Route the cord.  
1) Connect each AC adapter to the DC IN 9V jack and to each  
!
standard 120V AC wall outlet.  
2) Place one handset in the main base and the other in the  
charging cradle with the keypad facing forward.  
Use only the supplied  
AD-0001 AC adapter  
for the main base and  
AD-310 or AD-1010  
for the charging  
cradle.  
3) Make sure the charge/in use LED and charge LED illuminate.  
If the LED does not illuminate, check to see that the AC adapter is  
plugged in and the handset makes good contact with the cradle's  
charging contacts.  
Do not use any other  
AC adapter.  
• Connect each AC adapter to a continuous power supply.  
• Place each cradle close to the AC outlet to avoid long extension  
cords.  
•Do not place the power  
cord where it creates a  
trip hazard or where it  
could become chafed  
and create a fire or  
electrical hazard.  
4) Charge your handsets at least 15-20 hours before plugging the phone  
line.  
5) Once the handset battery packs are fully charged, connect the  
telephone line cord to the TEL LINE jack and a telephone  
outlet.  
If your telephone outlet isn't modular, contact your  
telephone company for assistance.  
Modular  
w w w . u n i d e n . c o m  
I N S T A L L I N G T H E P H O N E [ 8 ]  
 
   
D. Mount the Main Base on a Wall  
Standard wall plate mounting  
This phone can be mounted on any  
standard wall plate.  
1
1) Plug the AC adapter to the DC IN  
3
9V jack.  
2) Plug the AC adapter into a standard  
120V AC wall outlet.  
3) Plug the telephone line cord into  
the TEL LINE jack.  
4) Plug the telephone line cord into  
the telephone outlet.  
5) Align the mounting slots on the  
main base with the mounting posts  
on the wall. Then push in and down  
until the phone is firmly seated.  
5
5
4
2
[ 9 ] I N S T A L L I N G T H E P H O N E  
 
w w w . u n i d e n . c o m  
   
Direct wall mounting  
If you don't have a standard wall plate, you can mount your phone  
directly to the wall. Before doing this, consider the following:  
• Avoid electrical cables, pipes, or other items behind the mounting  
location that could cause a hazard when inserting screws into the  
wall.  
• Try to mount your phone within 5 feet of a working phone jack to  
avoid excessive cord lengths.  
• Make sure the wall material is capable of supporting the weight of  
the main base and handset.  
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring  
devices suitable for the wall material where the main base will be  
placed.  
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-  
15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for  
mounting the phone.  
2) Refer to steps 1 through 5 on page 9 to mount the telephone.  
Installing the Beltclip  
To attach the beltclip  
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.  
To remove the beltclip  
Pull both sides of the beltclip to release the tabs from the holes.  
w w w . u n i d e n . c o m  
I N S T A L L I N G T H E P H O N E [ 1 0 ]  
 
   
Headset Installation  
Your phone may be used with an optional headset. To use this feature,  
insert the headset plug into the headset jack.  
Your phone is ready for hands-free conversations.  
by calling our Parts Department. See page 35.)  
[ 1 1 ] I N S T A L L I N G T H E P H O N E  
 
w w w . u n i d e n . c o m  
   
Register Handsets to the Main Base before Using!  
Whichever handset you choose to charge in the main base will automatically register to the  
main base.  
note  
The second handset (charging in the extra charging cradle) MUST also be registered to the  
main base before use. Follow the steps below to register the second handset.  
•When you charge the  
handsets, Caller ID  
summary screen and  
the name of the  
1) Be sure both handsets are fully charged.  
handset, HS1 appears.  
If HS2 appears, you  
are charging the  
2) Remove the handset from the charging cradle, and place it in the main base. The charge/  
in use LED light on the main base will begin to flash, indicating that the registration is  
taking place.  
handset No. 2.  
3) Wait for at least 5 seconds, then remove the handset from the main base.  
•The charging cradle  
can be used to charge  
either handset.  
4) Press the find hs key on the main base. If both handset beep, registration is complete. If  
one handset does not beep, re-register that handset.  
5) Once both handsets are registered, it doesn’t matter which handset is placed in the main  
base or the charger.  
w w w . u n i d e n . c o m  
R E G I S T E R H A N D S E T S T O T H E M A I N B A S E B E F O R E U S I N G ! [ 1 2 ]  
 
   
When to Re-register Handsets  
1) You’ll need to re-register the second handset (follow steps on page 12) each time the digital  
security code is changed. Refer to page 32 for details regarding the Digital Security Code.  
2) When there is a power failure for more than one hour:  
note  
If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a  
move), both handsets will need to be re-registered. To re-register, follow the same  
registration process on page 12.  
Make sure to return the  
handsets to the cradles  
after each phone call.  
3) If the second handset’s battery becomes very low, the handset must be recharged for 15-  
20 hours and re-registered to the main base.  
[ 1 3 ] W H E N T O R E - R E G I S T E R H A N D S E T S  
 
w w w . u n i d e n . c o m  
 
Basic Setup  
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call  
Waiting), Area Code, Dial Mode and Language.  
CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using  
Handset 2, you will not see these options listed on the LCD screen.  
(Handset 1 shows HS1 in the display while the phone is charging.)  
AutoTalk, Area Code and Language options can be set by using either  
Handset 1 or Handset 2.  
Activating AutoTalk  
AutoTalk allows you to answer the phone simply by removing the handset from the cradle.  
You do not have to press any keys.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the select/channel key to turn AutoTalk on.  
3) Press the end key to complete the setting. The handset returns to  
standby mode.  
Activating Caller ID on Call Waiting  
Caller ID allows you to see the name and number of the calling party before you answer the  
phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that  
comes in when you are on the line.  
w w w . u n i d e n . c o m  
B A S I C S E T U P [ 1 4 ]  
 
         
You must subscribe to Caller ID service through your local telephone provider to use this  
feature.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/ key to select CIDCW.  
3) Press the select/channel key to toggle and turn on Caller ID on  
Call Waiting.  
4) Press the end key and return the handset to main base to  
complete the setting. The handset returns to standby mode.  
Entering Your Area Code  
If you can make a call by dialing only 7 digits (instead of 10), you can program your local  
area code in your phone. If you get a call from within your area code, you'll only see the 7-  
digit phone number. If you get a call from outside your area code, you'll see all 10 digits.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/ key twice to select Area Code.  
3) Press the select/channel key. If an area code was already stored,  
the phone will display it.  
[ 1 5 ] B A S I C S E T U P  
w w w . u n i d e n . c o m  
 
 
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you  
make an error, use the delete/transfer key to backspace.  
note  
5) Press the select/channel key. A confirmation tone sounds.  
If your phone system  
requires pulse dialing  
and you need to send  
DTMF tones during a  
call, you can  
temporarily switch over  
to tone dialing. (Refer  
to “Tone Dialing Switch-  
over” on page 20.)  
6) Press the end key to complete the setting. The handset returns to standby mode.  
Choosing the Dialing Mode  
Your phone can communicate with the telephone network in two different ways: tone dialing  
and pulse dialing. These days, most phone networks use a method called tone dialing, so  
your phone comes programmed for tone dialing.  
If your phone company uses pulse dialing, you'll need to change your phone's dial mode.  
There's an easy way to tell: try making a call. If your call connects, your phone's setting is  
fine. If not, follow the steps below:  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/  
key three times to select Dial.  
3) Press the select/channel key to set the phone to pulse dialing.  
4) Press the end key and return the handset to main base to  
complete the setting. The handset returns to standby mode.  
w w w . u n i d e n . c o m  
B A S I C S E T U P [ 1 6 ]  
 
   
Setting the Language  
You can change the language the menu display uses. Choose from English, French, or  
Spanish.  
1) When the phone is in standby mode, press and hold the call id/  
menu key. The following screen appears.  
2) Press the /vol/ key four times to select Language.  
3) Press the select/channel key to select Eng, Fr. or Esp.  
4) Press the end key to complete the setting. The handset returns to  
standby mode.  
Selecting the Ring Tone and Volume  
Your phone has five different ringer tone/volume combinations you can choose from.  
1) With the phone in standby mode, press the  
/vol/ or  
/vol/ key.  
2) The phone will sound the different ring tones at different volumes. To turn the ringer off,  
select Ringer Off.  
3) When the phone sounds the ring tone and volume you wish to use, press the end key.  
[ 1 7 ] B A S I C S E T U P  
w w w . u n i d e n . c o m  
 
     
Using Your Phone  
note  
Making and Receiving Calls  
Making a call  
1) Remove the handset from the cradle.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Dial the number.  
OR  
1) Remove the handset from the cradle.  
2) Dial the number.  
3) Press the talk/flash key.  
Receiving a call  
1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automatically  
To turn on the AutoTalk  
feature, see "Activating  
Autotalk" on page 14.  
answer the call when you pick it up.)  
2) Press the talk/flash key.  
OR  
1) If the handset is off the cradle, press the talk/flash, /tone/ , #/  
key or any  
*
number key. (AutoTalk is on.)  
Hanging up  
Press the end key or return the handset to the cradle.  
w w w . u n i d e n . c o m  
U S I N G Y O U R P H O N E [ 1 8 ]  
 
       
Transferring a Call  
Your cordless phone allows you to transfer outside calls from handset to handset; only one  
handset at a time can talk with an outside caller. The second handset cannot go off hook to  
listen to conversations or make an outgoing call while the other handset is in use.  
note  
To transfer a call  
If you transfer a call and  
it is not picked up after  
5 minutes, the call will  
be disconnected.  
1) During a call, press the delete/transfer key. The call will  
automatically be placed on hold and the transfer tone sounds.  
2) When the other handset receives the call, the transfer tone  
stops. To cancel the transfer and return to the caller, press the  
delete/transfer or talk/flash key on the handset.  
To receive a transfer call  
Pick up the handset from the cradle (when AutoTalk is set to on),  
or pick up the handset and press the talk/flash key to answer  
the transferred call. Additionally, you can answer the transferred  
call by pressing /tone/ , #/  
or any number key (when  
*
AutoTalk is set to on).  
Redialing the Last Dialed Number  
1) Remove the handset from the cradle.  
2) Press the talk/flash key.  
3) Listen for the dial tone.  
4) Press the redial/pause key.  
OR  
1) Remove the handset from the cradle.  
2) Press the redial/pause key.  
3) Press the talk/flash key.  
[ 1 9 ] U S I N G Y O U R P H O N E  
 
w w w . u n i d e n . c o m  
       
Adjusting the Earpiece Volume  
To change the earpiece volume, press the /vol/  
or  
note  
/vol/ key during a call.  
Temporarily Mute Ringer  
You can only mute the  
handset ringer if the  
handset is off the cradle  
when the phone starts  
ringing.  
If the handset is off the cradle while an incoming call is  
ringing, simply press the end key to mute the incoming  
ring. The ringer will sound with the next incoming call.  
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you can  
switch over to tone dialing after the call connects. This  
feature is useful when you need tone dialing to use any  
automated menu systems, such as telephone bank tellers,  
telephone prescriptions refills, customer support menus,  
etc.  
If your phone is set to pulse dialing mode, make your call  
normally. Once your call connects, press the /tone/  
*
key. Any digits you enter from then on will be sent as tone  
digits. When this particular call ends, the phone  
automatically returns to pulse dialing mode.  
w w w . u n i d e n . c o m  
U S I N G Y O U R P H O N E [ 2 0 ]  
 
         
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your main base, noise  
increases. If you pass the range limits of the main base, your call will terminate within one  
minute.  
note  
The UltraClear PlusTM  
true compander circuitry  
virtually eliminates  
background noise. This  
innovative technology,  
together with 20  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the phone´s  
channel for clear operation. While using your phone, press the select/channel key. Scanning  
appears on the display, indicating the phone is changing to another channel. For more  
information on interference, refer to "Radio Interference" on page 41.  
different channels,  
provides you with the  
best possible reception  
during all your  
Find Handsets  
conversations.  
To locate the handsets, press the find hs key on the main base.  
The handsets beep for 60 seconds.  
To cancel paging, press any key on either handset or the find hs  
key on the main base.  
Paging is also canceled when the phone receives an incoming  
call.  
[ 2 1 ] U S I N G Y O U R P H O N E  
 
w w w . u n i d e n . c o m  
             
Using Call Waiting  
If you have Call Waiting, you can receive calls while on the line.  
note  
1)If a call comes in while you are on the phone, you will hear a  
call waiting tone. If you have CIDCW activated, you will see  
the name and number of the incoming caller.  
2)Press the talk/flash key to accept the waiting call. After a  
short pause, you will hear the new caller.  
3)To return to the original caller, press the talk/flash key  
again.  
You must subscribe to Call Waiting through your local telephone company.  
Voice Mail Waiting Indicator  
If you subscribe to voice mail service, you can use your cordless telephone to access your  
voice mailbox. The charge/in use LED on the main base of your phone flashes whenever you  
have messages waiting in your voice mailbox.  
You must subscribe to  
voice mail service from  
your telephone company  
in order to use this fea-  
ture. The voice mail  
company will provide  
you with the access  
number.  
Just dial the access number supplied by your voice mail provider to enter your mailbox.  
You can program your voice mail access number to a speed dial number.  
If the voice mail waiting indicator remains on after you have retrieved your messages, press  
and hold the find hs key for 5 seconds. This will reset the indicator.  
w w w . u n i d e n . c o m  
U S I N G Y O U R P H O N E [ 2 2 ]  
 
       
Using the Speed Dial Memory  
The speed dial memory allows you to store up to 10 names and numbers in each handset. You  
can dial these numbers with just a few key presses.  
note  
The speed dial memory is not limited to phone numbers. You can store any number (up to 20  
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.  
For example, you can save your bank account number to speed dial memory. When you call  
your bank's telephone teller service and are prompted to enter your account number, simply  
press the memory key and the speed dial number where you stored your account number.  
Then press the select/channel key.  
When editing the speed  
dial memory, you must  
press a key within 30  
seconds or the phone  
will return to standby  
mode. If you return the  
handset to the cradle,  
the phone will return to  
standby mode also.  
Storing Names and Numbers in Speed Dial Memory  
1) With the phone in standby mode, press the memory key.  
2) Enter 0-9 to select the speed dial number where you would like to  
store this entry. You can also scroll through the list with the  
/
vol/ and  
/vol/  
keys. Press the select/channel key twice.  
3) Store Name appears and a cursor flashes indicating that the  
phone is ready for the name to be entered.  
If the selected speed dial number is already assigned, the Edit  
screen appears. You can select Edit to edit this entry, select  
Delete to erase this entry, or select Go Back to choose another  
speed dial number.  
[ 2 3 ] U S I N G T H E S P E E D D I A L M E M O R Y  
 
w w w . u n i d e n . c o m  
       
4) Enter a name according to the instructions below, then press the select/channel key. If no  
name is required, go to step 5.  
• The name can be up to 13 characters.  
note  
• Use the #/  
and /tone/  
keys to move the cursor to the desired location.  
*
• Use the delete/transfer key to delete characters as needed.  
• Press and hold the delete/transfer key to delete all the characters.  
If the next character  
uses the same number  
key, you must press the  
Refer to the letters on the number keys to select the desired characters.  
With each press of a numeric key, the displayed character appears in the following order:  
upper case letters first, lower case letters next and finally the number corresponding to  
the key.  
#/  
key to move the  
cursor over. Otherwise  
the next time you press  
the number key, it  
If you make a mistake while entering a name  
changes the character  
that was previously set.  
Use the /tone/  
or #/  
key to move the cursor to the incorrect character.  
*
Press the delete/transfer key to erase the wrong character. Then enter the correct  
character. To delete all characters, press and hold the delete/transfer key.  
Number of times key is pressed  
For example, to enter Movies.  
keys  
1
2
3
4
5
6
7
8
9
1) Press 6. Then press the #/  
move the cursor to the right.  
2) Press 6 six times.  
key to  
1
2abc  
3def  
3) Press 8 six times.  
4ghi  
5jkl  
4) Press 4 six times.  
6mno  
5) Press 3 five times.  
6) Press 7 eight times.  
7pqrs  
8tuv  
9wxyz  
0oper  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 4 ]  
 
5) Store Numberis displayed. The cursor flashes indicating that the  
phone is ready for the number to be entered.  
6) Use the keypad to enter the phone number; each number can be  
up to 20 digits.  
If you need the phone to pause during the dialing sequence, press  
the redial/pause key to insert a two-second delay between the  
numbers. You can enter multiple pauses to increase the delay.  
Each pause counts as a digit. The display shows a  
pause.  
P
for every  
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more  
than 30 seconds, it will beep rapidly, and the phone will return to standby mode.  
7) Press the memory key. You will hear a confirmation tone, and the  
following screen appears.  
Memory storage is complete.  
After about 2 seconds, the following screen displays all the speed  
dial memory entries.  
8) Press the end key to exit memory setup mode. The phone returns  
to standby.  
[ 2 5 ] U S I N G T H E S P E E D D I A L M E M O R Y  
 
w w w . u n i d e n . c o m  
 
Storing Caller ID Messages in Speed Dial Memory  
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory  
dialing. For instructions on viewing the Caller ID Message list, see page 29.  
note  
1) Press the call id/menu key. Select the phone number to be stored  
You cannot store a  
Caller ID message if no  
phone number appears  
in the message.  
from the Caller ID list by pressing the  
key.  
/vol/ or  
/vol/  
2) Press the memory key.  
3) Enter a number (0 - 9) or press the  
/vol/  
or  
/vol/  
key to select the memory  
location to be stored.  
4) Press the select/channel key. You hear a confirmation tone, and  
the number is stored in memory. The display returns to the Caller  
ID list.  
If a number has already been stored in the selected memory  
number location, a confirmation screen is displayed.  
Press the  
/vol/  
key to select Yes. Press the select/channel  
key to overwrite. The display returns to the Caller ID list.  
w w w . u n i d e n . c o m  
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 6 ]  
 
 
Making Calls from Speed Dial Memory  
1) Press the memory key. The handset displays your programmed  
speed dial number.  
2) Enter the number (0 - 9), or press the /vol/ or  
/vol/  
key to select the speed dial number you would like to dial.  
3) Press the talk/flash key. Connecting changes to Talk, and the  
volume setting and the number selected appear on the display.  
Then the displayed number is dialed.  
To cancel speed dialing  
To cancel speed dialing, press the end key; the handset returns to standby mode. The handset  
will also return to standyby mode if the handset is idle (i.e., no key is pressed) for 30  
seconds.  
[ 2 7 ] U S I N G T H E S P E E D D I A L M E M O R Y  
 
w w w . u n i d e n . c o m  
   
Caller ID and CIDCW (Caller ID on Call Waiting)  
You must subscribe to Caller ID service through your local telephone provider to use  
this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s  
name, phone number, date and time of call. The incoming call information is stored in the  
Caller ID record. If the Caller ID service includes the caller´s name, the caller´s name appears  
on the display (up to 15 letters).  
note  
•If you answer a call  
before the Caller ID  
message is received  
(for example, before  
the second ring), the  
Caller ID message will  
not appear.  
The date and  
time received  
Caller's name  
Caller's phone number  
You may receive any one of the following messages:  
When invalid data is received  
When a private name is received  
When a private number is received  
Incomplete Data  
•When the call is  
received via a  
telephone company  
that does not offer  
Caller ID service, the  
caller´s phone number  
and name do not  
Private Name  
Private Number  
When an unknown name is received Unknown Name  
When an unknown number is receivedUnknown Number  
Data errors appear as ¨ ¨.  
appear. (This includes  
international calls.)  
•When the call is  
received via a private  
branch exchange  
(PBX), the caller´s  
phone number and  
name may not appear.  
w w w . u n i d e n . c o m  
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 2 8 ]  
 
   
Viewing the Caller ID Message List  
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You  
can also view the Caller ID list during a call.  
note  
1) Press the call id/menu key. The summary screen displays the  
•In Caller ID operation,  
if no key is pressed for  
more than 30 seconds,  
an error tone sounds  
and the telephone  
returns to standby  
mode.  
number of new messages and total messages.  
2) Use the /vol/  
key to scroll through the messages from the  
latest to the earliest, or use the /vol/ key to scroll through  
the messages from the earliest to the latest.  
3) Press the call id/menu key to return to talk mode, or press the  
•Each message can be  
up to 15 characters for  
the phone number and  
the name.  
end key to return to standby mode.  
•The number of calls  
from the same Caller ID  
appears next to the  
received time. Once  
you view the new  
message, the number  
will be cleared and  
disappear.  
•During a call, don't  
press the end key, or  
the call will be  
disconnected.  
[ 2 9 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )  
 
w w w . u n i d e n . c o m  
   
Deleting Information from the Caller ID List  
If the phone receives more Caller ID messages than it can store, the oldest one in the list is  
automatically deleted. Caller ID data can also be deleted manually.  
note  
Deleting a Caller ID message  
•While using the Delete  
All?or Delete  
1) Press the call id/menu key in standby mode. Find the message to  
be deleted from the Caller ID list by pressing the /vol/  
or  
Message? screen, if no  
key is pressed for more  
than 30 seconds, an  
error tone sounds, and  
the handset returns to  
standby mode.  
/vol/ key.  
2) Press the delete/transfer key.  
3) Press the /vol/  
or  
/vol/  
key to select Yes, and then  
press the select/channel key.  
•If you get an incoming  
call or page, the  
deleting operation is  
canceled, and you can  
answer the call or  
page.  
Deleting all Caller ID names/numbers  
1) With the phone in standby mode, press the call id/menu key.  
2) Press the delete/transfer key.  
3) Press the /vol/  
or  
/vol/  
key to select Yes, and then  
press the select/channel key.  
You hear a confirmation tone and all stored Caller ID messages are  
deleted.  
w w w . u n i d e n . c o m  
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 3 0 ]  
 
   
Making a Call from the Caller ID List  
You can place a call from the Caller ID list.  
note  
1) Press the call id/menu key in standby mode. Select the phone  
number that you want to dial by pressing the  
/vol/  
or  
/
vol/ key.  
You cannot make a call  
from the Caller ID list if  
your cordless phone is  
connected to a private  
branch exchange (PBX).  
2) To have the phone dial a 1before the displayed Caller ID number, press 1. To have the  
phone dial the stored area code before the displayed Caller ID number, press 3.  
3) Press the talk/flash key. The displayed phone number dials automatically.  
Caller ID on Call Waiting (CIDCW)  
With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller ID data  
is displayed. To accept the waiting call, press the talk/flash key (see page 22).  
[ 3 1 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )  
 
w w w . u n i d e n . c o m  
     
Changing the Digital Security Code  
To protect you against misbilled calls which might result from your phone being activated by  
TM  
other equipment, the cordless phone provides AutoSecure (which electrically locks your phone  
TM  
when each handset is in the cradle) and Random Code digital security which automatically  
selects one of over 262,000 digital security codes for each handset and the main base.  
If the handset battery pack is completely discharged or the battery pack is removed, the digital  
security code will be lost. If this happens, a new security code is set automatically the next time  
the battery pack is charged. In the rare situation that you suspect another cordless telephone  
is using the same security code, you can change the code.  
1) Remove the handset from the cradle. Press and hold the find hs key on the main base.  
2) While holding the find hs key, place the handset in the main base, and leave the handset  
in the main base for more than three seconds.  
3) Remove the handset from the main base. Then place the second handset in the main base  
and wait for more than three seconds. No need to holding the find hs key this time.  
4) Press the talk/flash key on one handset. Once you make sure Talk appears on the display,  
press the end key. Then, try with the second handset. If each handset displays Talk, a  
new security code is set. Otherwise, return to step 1 and try again.  
w w w . u n i d e n . c o m  
C H A N G I N G T H E D I G I T A L S E C U R I T Y C O D E [ 3 2 ]  
 
   
Note on Power Sources  
Low battery alert  
When the battery pack is very low and needs to be charged, the phone is  
programmed to eliminate functions in order to save power. If the phone is not in  
use, Low Battery appears on the LCD and none of the keys will operate.  
If the phone is in use, Low Battery flashes and the handset beeps. Complete your  
conversation as quickly as possible and return the handset to the cradle for  
charging.  
Information stored in the phone's memory will be retained for 30 minutes after  
the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID  
list.  
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum  
performance, be sure to return the handset to the cradle after a telephone call.  
Battery replacement and handling  
When the operating time becomes short even after a battery is recharged, please replace the battery.  
With normal usage, your battery should last about one year. A replacement battery may be purchased by calling  
1-800-554-3988 (Mon - Fri 8 am to 5 pm, CST).  
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden  
battery model and Uniden adapter model specifically designated for this product.  
Caution  
Power Failure  
During the period that the power is off, you will not  
be able to make or receive calls with the telephone.  
• Use only the specified Uniden battery pack (BT-905 or BT-1006).  
• Do not remove the battery from the handset to charge it.  
• Never throw the battery into a fire, disassemble it, or heat it.  
• Do not remove or damage the battery casing.  
[ 3 3 ] N O T E O N P O W E R S O U R C E S  
w w w . u n i d e n . c o m  
 
   
Talk and Standby Times  
With average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days of  
standby time. When your handsets are not being used and are left off of their charging cradles, the battery will  
gradually discharge. You can achieve optimum battery life and performance by returning the handset to the charging  
cradle after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced  
respective to the amount of time the handset is off of the charging cradle.  
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts on  
the handset once a month.  
Dampen a cloth with plain water. Gently rub the damp cloth  
over the charging contacts until all visible dirt is removed.  
Dry the contacts thoroughly before returning the handset to  
the cradle.  
Caution  
Do not use paint thinner, benzene,  
alcohol, or other chemical products.  
Doing so may discolor the surface of  
the telephone and damage the finish.  
w w w . u n i d e n . c o m  
N O T E O N P O W E R S O U R C E S [ 3 4 ]  
 
   
General Information  
The phone complies with FCC Parts 15 and 68.  
Operating temperature: -10°C to +50°C (+14°F to +122°F)  
AC Adapter Information  
(For the main base)  
AD-0001  
120V AC 60Hz  
9V DC 210mA  
(For the charging cradle)  
AC Adapter part number:  
Input Voltage:  
Output Voltage:  
AD-310 or AD-1010  
120V AC 60Hz  
9V DC 210mA  
Battery Information  
Battery part number:  
Capacity:  
BT-905  
600mAh, 3.6V  
BT-1006  
500mAh, 3.6V  
or  
Frequency  
924.516925 - 926.704425 MHz  
2,405.155942 - 2,411.718441 MHz  
To avoid damage to the phone use only Uniden AD-0001, AD310 or AD-1010 and BT-905 or BT-1006 with  
your phone.  
• If the handset is left off the cradle, the actual talk mode duration will be reduced respective to the amount of  
time the handset is off the cradle.  
Recharge your phone on a regular basis by returning the handset to either cradle after each phone call.  
When the operating time becomes short, even after the battery is recharged, please replace the battery.  
With normal usage, the battery should last about one year.  
A replacement Uniden adapter or battery may be purchased by calling 1-800-554-3988 (Mon - Fri 8 am to 5 pm, CST).  
Specifications, features, and availability of optional accessories are all subject to change without prior notice.  
[ 3 5 ] G E N E R A L I N F O R M A T I O N  
 
w w w . u n i d e n . c o m  
       
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve  
your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm,  
CST. Phone support is closed on holidays.)  
Symptom  
Suggestion  
The charge/in use LED or  
charge LED won't illuminate  
when the handset is placed in  
the cradle.  
• Make sure the AC adapter is plugged into the cradle and wall outlet.  
• Make sure the handset is properly seated in the cradle.  
• Make sure the charging contacts on the handsets are clean.  
The audio sounds weak and/or  
scratchy.  
• Move the handset and/or main base away from metal objects or appliances and try again.  
• Press the select/channel key in the talk mode to help eliminate background noise.  
• Make sure that the handset is not too far from the main base.  
Can't make or receive calls.  
• Re-register both handsets (see page 12).  
• Check both ends of the telephone line cord.  
• Make sure the AC adapter is plugged into the main base and wall outlet.  
• Disconnect the AC adapter for a few minutes. Then reconnect it.  
• Change the digital security code (see page 32).  
• Make sure that the handset is not too far from the main base.  
• Check the dialing mode used by your telephone company.  
w w w . u n i d e n . c o m  
T R O U B L E S H O O T I N G [ 3 6 ]  
 
   
Symptom  
Suggestion  
The handset doesn't ring or  
receive a page.  
• Re-register both handsets (see page 12).  
• The battery pack may be weak. Charge the battery for 15-20 hours.  
• The handset may be too far from the main base.  
• Place the main base away from appliances or metal objects.  
• Change the digital security code (see page 32).  
• Check the battery pack to ensure there is a secure connection.  
• Make sure ringer volume isn't set to "off."  
Severe noise interference.  
• Keep both handsets away from microwave ovens, computers, remote control toys, wireless  
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical  
appliances.  
• Move the main base to another location or turn off the source of interference.  
The Caller ID does not display.  
• The call was answered before the second ring.  
• The call was placed through a switchboard.  
• Charge the handset.  
• Your Caller ID service may not be active; contact your local telephone service provider.  
Handset No.1 or No.2 is not  
working.  
• Make sure the battery pack is connected to the handset and fully charged.  
• Re-register the non-funtional handset.  
Unavailable message is displayed • Make sure the other handset is not already in use. Both handsets cannot be in talk mode at the  
on the LCD screen of the  
handset.  
same time.  
• Place the handset in the main base for at least 5 seconds to re-register to the main base.  
• Make sure the handset is not too far from the main base when trying to use.  
[ 3 7 ] T R O U B L E S H O O T I N G  
w w w . u n i d e n . c o m  
 
Symptom  
Suggestion  
The handset doesn’t  
communicate with the main base • Re-register both handsets (see page 12).  
or the other handset.  
No 3-way conversation.  
• Only one handset at a time can talk with an outside caller. To allow the other handset to talk to  
the caller, transfer the call.  
Voice Message Indication does  
not work.  
• Contact your local telephone company to make sure that your telephone receives FSK message  
signaling.  
• Reset the indicator by pressing and holding the find hs key for 5 seconds.  
w w w . u n i d e n . c o m  
T R O U B L E S H O O T I N G [ 3 8 ]  
 
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.  
Case  
Action  
If the handset or base is exposed to  
moisture or liquid, but it only affects the  
exterior plastic housing.  
Wipe off the liquid, and use as normal.  
If moisture or liquid has entered the  
Handset:  
plastic housing (i.e., liquid can be heard 1.Remove the battery cover and leave it off for ventilation  
in the phone or liquid has entered the  
handset battery compartment or vent  
openings on the base).  
2.Remove the battery pack by disconnecting  
3.Leave the battery cover off and the battery pack disconnected for at least 3 days  
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.  
5.Recharge the handset’s battery pack for 20 hours before using again.  
Base:  
1.Disconnect the AC adapter from the base unit, cutting off electrical power.  
2.Disconnect the telephone cord from the base unit.  
3.Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while recharging the battery pack to  
avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will cause permanent  
damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work, please call our  
Customer Service Hotline at 1-800-297-1023.  
[ 3 9 ] T R O U B L E S H O O T I N G  
w w w . u n i d e n . c o m  
 
   
Uniden works to reduce lead content in our PVC coated cords in  
our product and accessories.  
product. It is designed to be connected to a compatible modular  
jack that is also compliant. See installation instructions for  
details.  
Precautions!  
Before you read anything else, please observe the following:  
Warning!  
Warning!  
The cords on this products and/or accessories contain lead, a  
chemical known to the State of California to cause birth defects or  
other reproductive harm. Wash hands after handling.  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage  
to the unit, DO NOT expose this unit to rain or moisture.  
The REN is used to determine the number of devices that may be  
connected to a telephone line. Excessive RENs on a telephone line  
may result in the devices not ringing in response to an incoming  
call. In most but not all areas, the sum of RENs should not exceed  
five (5.0). To be certain of the number of devices that may be  
connected to a line, as determined by the total RENs, contact the  
local telephone company. For products approved after July 23,  
2001, the REN for this product is part of the product identifier  
that has the format US:AAAEQ##TXXXX. The digits represented by  
## are the REN without a decimal point (e.g., 03 is a REN of 0.3).  
For earlier products, the REN is separately shown on the label.  
If this equipment causes harm to the telephone network, the  
telephone company will notify you in advance that temporary  
discontinuance of service may be required. But if advance notice  
isn’t practical, the telephone company will notify the customer as  
soon as possible. Also, you will be advised of your right to file a  
complaint with the FCC if you believe it is necessary.  
Important Safety Instructions  
When using your telephone equipment, basic safety precautions  
should always be followed to reduce the risk of fire, electric shock  
and injury to persons, including the following:  
Rechargeable Nickel-Cadmium Battery Warning  
•This equipment contains a rechargeable nickel-cadmium battery.  
•Cadmium is a chemical known to the State of California to cause  
cancer.  
•The rechargeable nickel-cadmium battery contained in this  
equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
•Do not charge the rechargeable nickel-cadmium battery used in  
this equipment in any charger other than the one designed to  
charge this battery as specified in the owner’s manual.  
Using another charger may damage the battery or cause the  
battery to explode.  
1. Do not use this product near water, for example, near a bath  
tub, wash bowl, kitchen sink or laundry tub, in a wet basement  
or near a swimming pool.  
2. Avoid using a telephone (other than a cordless type) during an  
electrical storm. There may be a remote risk of electric shock  
from lightning.  
3. Do not use the telephone to report a gas leak in the vicinity of  
the leak.  
4. Use only the power cord and batteries indicated in this manual.  
Do not dispose of batteries in a fire. They may explode. Check  
with local codes for possible battery disposal instructions.  
5. Do not disassemble any component of this product.  
The telephone company may make changes in its facilities,  
equipment, operations or procedures that could affect the  
operation of the equipment. If this happens the telephone  
company will provide advance notice in order for you to make  
necessary modifications to maintain uninterrupted service.  
Please follow instructions for repairing, if any (e.g. battery  
replacement section); otherwise do not substitute or repair any  
parts of the device except as specified in this manual.  
Connection to party line service is subject to state tariffs. Contact  
the state public utility commission, public service commission or  
corporation commission for information. This equipment is  
hearing aid compatible.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
SAVE THESE INSTRUCTIONS  
•Uniden voluntarily participates in an RBRC® industry program to  
collect and recycle nickel-cadmium batteries at the end of their  
useful life, when taken out of service within the United States.  
The RBRC® program provides a convenient alternative to placing  
used nickel-cadmium batteries into the trash or municipal waste  
stream, which is illegal in some areas.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions. Do not  
open or mutilate the battery, and disconnect the battery before  
shipping this product.  
•Through the RBRC® program, Uniden makes it easy for you to  
drop off the used battery at local retailers of replacement nickel-  
cadmium batteries. You may also contact your local recycling  
center for information on where to return the used battery.  
Please call 1-800-8-BATTERY for information on Ni-Cd battery  
recycling in your area. Uniden's involvement in this program is  
part of its commitment to protecting our environment and  
conserving natural resources.  
The FCC Wants You To Know  
Should you experience trouble with this equipment, please  
contact Uniden customer service at 800-297-1023. If the  
equipment is causing harm to the telephone network, the  
telephone company may request that you disconnect the  
equipment until the problem is resolved.  
This equipment complies with Part 68 of the FCC rules and the  
requirements adopted by the ACTA. On the bottom of this  
equipment is a label that contains, among other information, a  
product identifier in the format US:AAAEQ##TXXXX. If requested,  
this number must be provided to the telephone company.  
An applicable Universal Service Order Codes (USOC) certification  
for the jacks used in this equipment is provided (i.e., RJ11C) in  
the packaging with each piece of approved terminal equipment.  
A plug and jack used to connect this equipment to the premises  
wiring and telephone network must comply with the applicable  
FCC Part 68 rules and requirements adopted by the ACTA. A  
compliant telephone cord and modular plug is provided with this  
NOTICE: According to telephone company reports, AC electrical  
surges, typically resulting from lightning strikes, are very  
destructive to telephone equipment connected to AC power  
sources. To minimize damage from these types of surges, a surge  
arrestor is recommended.  
•RBRC® is a registered trademark of the Rechargeable Battery  
Recycling Corporation.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
w w w . u n i d e n . c o m  
P R E C A U T I O N S & W A R R A N T Y [ 4 0 ]  
 
   
Changes or modifications to this product not expressly approved  
by Uniden, or operation of this product in any way other than as  
detailed by the owner's manual, could void your authority to  
operate this product.  
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some  
states do not allow this exclusion or limitation of incidental or  
consequential damages so the above limitation or exclusion may  
not apply to you.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications between  
the handset and base of your cordless telephone are accomplished  
by means of radio waves which are broadcast over the open  
airways.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state. This  
warranty is void outside the United States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner's manual you are certain  
that the Product is defective, pack the Product carefully  
(preferably in its original packaging). Disconnect the battery from  
the Product and separately secure the battery in its own separate  
packaging within the shipping carton. The Product should include  
all parts and accessories originally packaged with the Product.  
Include evidence of original purchase and a note describing the  
defect that has caused you to return it. The Product should be  
shipped freight prepaid, by traceable means, to warrantor at:  
Because of the inherent physical properties of radio waves, your  
communications can be received by radio receiving devices other  
than your own cordless telephone unit. Consequently, any  
communications using your cordless telephone may not be private.  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions: (1) This device may not  
cause harmful interference, and (2) This device must accept any  
interference received, including interference that may cause  
undesired operation. Privacy of communications, may not be  
ensured when using this phone.  
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty  
service.  
To insure the safety of users, the FCC has established criteria for  
the amount of radio frequency energy various products may  
produce depending on their intended usage. This product has been  
tested and found to comply with the FCCís exposure criteria. For  
body worn operation, the FCC RF exposure guidelines were also  
met when used with the Uniden accessories supplied or designed  
for this product. Use of other accessories may not ensure  
compliance with FCC RF exposure guidelines and should be  
avoided.  
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the  
original retail owner, this Uniden Product to be free from defects  
in materials and craftsmanship with only the limitations or  
exclusions set out below.  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
WARRANTY DURATION: This warranty to the original user shall  
terminate and be of no further effect 12 months after the date of  
original retail sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or necessary, (B)  
modified, altered, or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C)  
improperly installed, (D) serviced or repaired by someone other  
than an authorized Uniden service center for a defect or  
malfunction covered by this warranty, (E) used in any conjunction  
with equipment or parts or as part of any system not  
manufactured by Uniden, or (F) installed or programmed by  
anyone other than as detailed by the owner's manual for this  
product.  
(800) 297-1023, 7:00 a.m. to 7:00 p.m. CST,  
Monday through Friday; 9:00 a.m. through 5:00 p.m. CST,  
Saturday and Sunday (phone support is closed on holidays).  
Radio Interference  
Radio interference may occasionally cause buzzing and humming  
in your cordless handset, or clicking noises in the base. This  
interference is caused by external sources such as TV, refrigerator,  
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit  
is NOT DEFECTIVE. If these noises continue and are too  
distracting, please check around your home to see what  
appliances may be causing the problem. In addition, we  
recommend that the base not be plugged into a circuit that also  
powers a major appliance because of the potential for  
interference. Be certain that the antenna on the unit is fully  
extended when needed.  
STATEMENT OF REMEDY: In the event that the product does not  
conform to this warranty at any time while this warranty is in  
effect, warrantor will either, at its option, repair or replace the  
defective unit and return it to you without charge for parts,  
service, or any other cost (except shipping and handling) incurred  
by warrantor or its representatives in connection with the  
performance of this warranty. Warrantor, at its option, may replace  
the unit with a new or refurbished unit. THE LIMITED WARRANTY  
SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES  
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER  
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,  
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS  
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving  
radio signals from another cordless telephone or other source of  
interference. If you cannot eliminate this type of interference, you  
need to change to a different channel.  
Finally, it should be noted that some cordless telephones operate  
at frequencies that may cause interference to nearby TVs and  
VCRs. To minimize or prevent such interference, the base of the  
cordless telephone should not be placed near or on top of a TV or  
VCR. If interference is experienced, moving the cordless telephone  
farther away from the TV or VCR will often reduce or eliminate the  
interference.  
[ 4 1 ] P R E C A U T I O N S & W A R R A N T Y  
 
w w w . u n i d e n . c o m  
   
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is  
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that  
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical  
specifications were met. It does not imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The  
REN assigned to each terminal equipment provides an indication of the maximum number of terminals  
allowed to be connected to a telephone interface. The termination on an interface may consist of any  
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of  
all the devices does not exceed five.  
RADIO EQUIPMENT  
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were  
met.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device  
must accept any interference, including interference that may cause undesired  
operation of the device. “Privacy of communications may not be ensured when using this telephone.  
w w w . u n i d e n . c o m  
I . C . N O T I C E [ 4 2 ]  
 
   
E, F, G, H, I, J, K, L  
T, U  
Index  
Earpiece volume . . . . . . . . . . . .20  
Find handset . . . . . . . . . . . . . .21  
General information . . . . . . . . .35  
I.C. Notice . . . . . . . . . . . . . . .42  
Installing the phone . . . . . . . . . .6  
Interference . . . . . . . . . . . . . .41  
Liquid damage . . . . . . . . . . . . .39  
Talk and Standby Times . . . . . . . 34  
Technical information . . . . . . . . 35  
Tone dialing switch-over . . . . . . 20  
Transferring a call . . . . . . . . . . 19  
Traveling out-of-range . . . . . . . 21  
Troubleshooting . . . . . . . . . . . 36  
A
AC adapter information . . . . . . . 35  
B
Basic setup . . . . . . . . . . . . . . 14  
Battery pack  
V, W, X, Y, Z  
Information . . . . . . . . . . . . . 35  
Installing . . . . . . . . . . . . . . . 7  
Preparing and charging . . . . . . 7  
Replacement and handling . . . 33  
Beltclip installation . . . . . . . . . 10  
Voice mail waiting indicator . . . 22  
Wall mounting . . . . . . . . . . . . . . 9  
Warranty . . . . . . . . . . . . . . . . 41  
M, N, O, P, Q  
Making a call . . . . . . . . . . . . . .18  
Precautions . . . . . . . . . . . . . . .40  
R
C
Receiving a call . . . . . . . . . . . .18  
Redial . . . . . . . . . . . . . . . . . .19  
Register . . . . . . . . . . . . . . . . .12  
Ringer tone . . . . . . . . . . . . . . .17  
Call transfer feature . . . . . . . . . 19  
Call waiting . . . . . . . . . . . . . . 22  
Caller ID service . . . . . . . . . . . 28  
Call waiting . . . . . . . . . . . . . 22  
Deleting . . . . . . . . . . . . . . . 30  
Making a call . . . . . . . . . . . . 31  
Viewing . . . . . . . . . . . . . . . 29  
Channel . . . . . . . . . . . . . . . . . 21  
Charging the battery pack . . . . . . 8  
Cleaning contacts . . . . . . . . . . 34  
Connect the cradle . . . . . . . . . . . 8  
Controls and functions . . . . . . 3, 4  
S
Second Handset . . . . . . . . . . . .12  
Speed dial memory  
Making calls from speed dial memory  
. . . . . . . . . . . . . . . . . . . .27  
Storing names and numbers in speed  
dial memory . . . . . . . . . . .23  
D
Dial mode . . . . . . . . . . . . . . . 16  
Digital security code . . . . . . . . 32  
[ 4 3 ] I N D E X  
w w w . u n i d e n . c o m  
 
 
Memo  
w w w . u n i d e n . c o m  
[ 4 4 ]  
 
Memory List  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
MEMORY LOCATION MEMO  
Name Phone Number  
Memory  
Location  
Memory  
Location  
1*  
2
6
7
3
8
4
9
5
10  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
MEMORY LOCATION MEMO  
Name Phone Number  
Memory  
Location  
Memory  
Location  
1*  
2
6
7
3
8
4
9
5
10  
w w w . u n i d e n . c o m  
[ 4 5 ]  
 
 
At Uniden, we'll take care of you!  
Thank you for purchasing a Uniden product. If you have any questions or problems,  
please do not return this product to the place of purchase.  
Having Trouble?  
call our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to  
5 p.m. CST. (Phone support is closed on holidays.)  
Need a Part?  
To order headsets, additional handsets, replacement batteries or other accessories, visit  
Help for our Special Needs Customers  
If you need special assistance due to a disability or have questions on the accessibility  
features of this product, please call 1-800-874-9314 (voice or TTY)  
May be covered under one or more of the following U.S. patents:  
4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010  
5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981  
5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289  
5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619  
5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358  
5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278  
6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920  
6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940  
6,953,118 7,023,176  
Other patents pending.  
 

Taurus Group Fryer Professional 1 User Manual
TIMEX Weather Products Thermometer TX6010 User Manual
TOA Electronics Portable Speaker H 3 User Manual
Toshiba Barcode Reader B EV4T SERIES User Manual
Traulsen Refrigerator RHT126WUT HHG User Manual
Tripp Lite Portable Generator PV700HF User Manual
Tripp Lite Surge Protector 93 2674 User Manual
Ultra Products Power Supply X2 750W User Manual
Universal Remote Control Universal Remote MX 850 User Manual
VTech Cordless Telephone LS6405 User Manual