Uniden Cordless Telephone DWX207 User Manual

UNIDEN  
CORDLESS  
TELEPHONES  
DWX207 Series  
 
Accessibility  
Uniden provides a customer service hotline for accessibility  
questions. If you have a disability and need customer service  
assistance or if you have any questions about how Uniden's  
products can accommodate persons with disabilities, please call  
the accessibility voice/TTY line: 1-800-874-9314.  
Our customer care hours as well as accessibility information  
"Accessibility" link. If your call is received outside of our business  
hours, you can leave us a message and we will call you back.  
Important!  
The DWX207 accessory handset will not operate until it is  
registered to a Uniden base. This manual describes how to set  
up your new handset; for more detailed instructions on operating  
your new handset, please refer to the manual supplied with your  
base. The DWX207 waterproof accessory handset operates just  
like a regular DECT2000 series handset.  
Terminology Used in this Manual  
Accessory A handset that works with an expandable phone base.  
Handset  
Accessory handsets must be registered to a base.  
The main part of the phone that connects to your phone  
line, and lets you make and receive calls.  
Base  
Charging  
cradle  
A cradle that charges an accessory handset. It connects to  
power but not to a phone line.  
The handset is not in use. No line has been activated.  
(It doesn’t matter whether the handset is in the cradle.)  
No dial tone is present.  
Standby  
Station  
Any registered handset or the base.  
A dial tone has been enabled, so you can dial and carry on  
a conversation with an outside party.  
Talk  
Note: Illustrations in this manual are used for explanation purposes.  
Some illustrations may differ from the actual unit.  
Uniden® is a registered trademark of Uniden America Corporation.  
 
2
Compatible Bases  
This handset is compatible with Uniden's 1.9 GHz DECT6.0  
Expandable phone system: the DECT1500, DECT2000 and  
for the most up-to-date list of compatible bases.  
Installing the Accessory Handset  
Checking the Package Contents  
Make sure your package contains the following items. If any  
items are missing or damaged, contact our Customer Service  
Hotline. See the back cover page for contact information.  
• Cordless Handset  
• Charging cradle  
• Belt Clip  
• Printed Material  
• AC Adapter (model # PS-0011: Input 120V AC, 60 Hz; Output  
19V DC, 100 mA)  
• Rechargeable NiMH Battery Pack (model # BT-1008: Capacity  
650 mAh, 2.4V)  
Activate the Handset  
The handset is powered by a rechargeable battery pack already  
installed in the handset’s battery compartment.  
Before charging  
the battery for the  
first time, push  
the activation  
pin, located on  
the bottom of  
the handset  
(see label with  
instructions).  
Once you activate  
the handset, remove  
the label.  
Note: Use only the Uniden BT-1008 rechargeable battery pack  
supplied with your cordless telephone.  
 
3
Charging the Accessory Handset  
Use only the Uniden PS-0011 AC adapter with the charging  
cradle.  
Connect the AC adapter to the  
DC IN 19V jack on the bottom  
of the charging cradle, and  
place the cord through the  
molded wiring channel.  
Connect the AC  
adapter to a  
standard 120V  
AC wall outlet.  
Place the handset in the charging  
cradle with the display facing forward.  
Make sure that the  
charge LED  
illuminates when the  
handset is seated.  
What if the charge LED  
doesn’t light up?  
Check the AC adapter connection.  
Make sure you are not using an outlet  
that’s controlled by a wall switch.  
Charge your handset at least 25 hours before  
using your new handset for the first time.  
 
4
Notes: For best results, wipe off dirt or shake water from handset  
before placing in the charging cradle.  
• Due to the magnetic inductive charging used with this model  
the bottom of the handset might be warmer than room  
temperature when you first remove it from the charging cradle.  
However, the warmth should not be excessive or  
uncomfortable to touch.  
Do not place the power cord where it creates a trip hazard or  
where it could become chafed and create a fire or electrical hazard.  
Caution:  
- Keep magnetic items away from the handset.  
- Don’t place the handset where it will be subjected to direct  
sunlight for long periods of time.  
Registering the Handset  
If you have purchased this accessory handset separately, it must  
be registered to the base before you can use it.  
Notes: The handset must be fully charged before attempting to register.  
• Only one handset can be registered at a time.  
Handsets that have not been registered display:  
ꢀ) If the other base has an LCD display:  
With the phone in standby, press [Menu/Select] on  
the base. Press [ ] to move the cursor to REGISTER  
HANDSET and then press [Menu/Select]. HANDSET  
REGISTERING appears.  
If the other base does not have an LCD display:  
Disconnect the base AC adapter. Then press and hold  
[find hs] or [find] while you reconnect the adapter. Keep  
pressing [find hs] or [find] until the charge/in use LED  
starts to blink.  
2) On the handset, press and hold [#] until the handset beeps  
and displays HANDSET REGISTERING.  
3) When the handset finishes registering, it shows  
REGISTRATION COMPLETE in the display.  
 
5
What if the display shows REGISTRATION FAILED?  
Repeat the process starting with step 1.  
Resetting the Handset  
If you want to register the handset to a different base or replace  
a handset with another one, you must first clear the registration  
information from the base and the handset.  
ꢀ) Press and hold [ ] and [#] for at least five seconds, until the  
SYSTEM RESET menu appears.  
2) Select the DEREGISTER HS  
ꢀ9JKEJꢀ*CPFUGV!  
submenu by pressing [Menu/  
ꢀ*CPFUGVꢀꢀꢀꢀꢁꢂ  
Select]. WHICH HANDSET?  
appears in the display.  
ꢀ*CPFUGVꢀꢀꢀꢀꢁꢃ  
3) Use [  
] or [  
] to select the handset ID to be de-  
registered from the list, and then press [Menu/Select].  
DEREGISTER HS appears.  
4) Press [  
] to move the cursor to YES, and then press  
[Menu/Select]. You will hear a confirmation tone.  
Resetting the Handset Without the Base  
If the original base this handset was registered to is not  
available for some reason (for example, it is lost or somehow  
incapacitated), you can still reset the handset and use it with  
another base.  
ꢀ) Press and hold [ ] and [#] for at least five seconds, until the  
SYSTEM RESET menu appears.  
2) Press [  
] to move the cursor to BASE UNAVAILABLE and  
then press [Menu/Select]. WHICH BASE? appears.  
3) Press [  
] to move the cursor to the base which you want  
to de-register from, and then press [Menu/Select]. BASE  
UNAVAILABLE appears.  
4) Press [  
] to move the cursor to YES, and then press  
[Menu/Select]. You hear a confirmation tone, and the  
handset deletes its own link to the base without trying to  
contact the base.  
Note: If the handset is still registered to another base, it searches for  
the other base and then returns to standby.  
Now you are ready to register the handset to the new base.  
 
6
Replace the Rechargeable Handset Battery Pack  
ꢀ) Remove the four screws  
holding the battery  
compartment with a  
screwdriver and take off  
the battery cover. Remove  
the old battery pack from  
the battery compartment.  
2) Line up the red and black  
wires with the polarity label  
in the battery compartment  
(the connector only fits one  
way). Push the connector  
in firmly; you should hear  
the connector click into  
place.  
3) Tug on the battery wires  
slightly to make sure you  
have a good connection.  
4) Before placing the battery  
cover back on the handset,  
check the rubber seal  
located on the under side  
of the cover: make sure  
that the seal is in good  
condition and that there  
is no foreign matter under  
the seal.  
Note: If the rubber seal  
appears warn, nicked, or dried  
out, replacement seals are  
available through the Uniden  
Parts Department. See the  
information.  
 
7
5) Insert the bottom end of  
the cover into the grooves  
on the handset and lay  
the cover over the battery  
compartment. Tighten the  
four screws securely.  
Notes: • If there is any foreign  
matter on the rubber seal  
located on the under side  
of the battery cover, the  
handset may not be  
water tight.  
• The rubber seal should  
be replaced every two  
years, even if it does not  
look worn.  
Installing the Belt Clip  
Insert the tabs on the sides of the belt clip  
into the holes on either side of the handset.  
Press the belt clip down until it clicks into  
place. (Tug on the clip to make sure it’s  
secure.)  
To remove the belt clip, gently pull the tabs  
out of the holes, then slide the belt clip off  
of the handset.  
 
8
Using the Interface  
Parts of the Handset  
new message LED  
Earpiece  
Display (LCD)  
[
] key (up)  
[Clear/Int’com] key  
(clear/intercom)  
[Menu/Select] key  
] key (caller ID/right)  
[ ] key (end call)  
] key (down)  
[
[
] key (phonebook/left)  
[ /Flash] key (talk/flash)  
[
Twelve-key dial pad  
[
/tone] key  
[Redial/Pause] key  
/Mute] key  
(messages/mute)  
[#] key  
[
] key (speaker)  
[
Microphone  
Belt clip hole  
Speakerphone  
speaker and ringer  
Battery compartment  
 
9
Reading the Display  
Handset ID and banner  
Number of new  
Caller ID calls received  
Call duration  
The ringer off icon indicates that the ringer is  
turned off.  
The voice mail icon appears when you have  
messages waiting in your voice mailbox.  
The privacy icon appears when the Privacy  
Mode is turned on.  
The speaker icon appears when the speaker  
phone is in use.  
The mute icon appears while the microphone  
is muted.  
The battery icon indicates the handset  
battery status: full, medium, low, and empty.  
 
ꢀ0  
Using the Four-way Function Key  
Your handset has  
a four-way function  
key that allows you  
to move the cursor  
or pointer on the  
Up  
display and access  
the most commonly  
View the  
phonebook  
View the  
Caller ID  
used features at the  
touch of a button. By  
moving this key to  
Four-way  
Function Key  
the left, you open the  
phonebook. Move  
the key to the right  
to access Caller ID  
information.  
Down  
To use this four-way key, place your thumb over the key on the  
handset and move to the four positions to get the feel of how it  
moves and operates.  
Using the Handset Menus  
To open the menu, press the [Menu/Select] key.  
The arrow pointer on the left side of the line shows which  
menu item is currently highlighted. Use [  
function key to move the pointer up and [  
pointer down.  
] on the four-way  
] to move the  
To select the highlighted option, press [Menu/Select].  
To go back to the previous screen, press [left] on the four-  
way function key.  
[ ]  
To exit the menu, press  
.
If you don’t press any keys for thirty seconds, the phone will  
time out and exit the menu.  
Entering Text from Your Handset  
You can use the number keypad on your handset to enter text  
by referring to the letters printed on each number key. When you  
press the number key in a text entry field, the phone displays  
the first letter printed on the number key. Press the number key  
twice to display the second letter and three times to display the  
third. Capital letters are displayed first, then lower case letters,  
and then the number on the key.  
 
ꢀꢀ  
If two letters in a row use the same number key, enter the first  
letter, then use [right] on the four-way function key to move the  
cursor to the next position to enter the second letter.  
Number of times key is pressed  
For example, to enter the word "Movies":  
ꢀ) Press [6] once to enter M.  
2) Use [right] on the four-way function key to move the cursor  
to the right.  
3) Press [6] six times to enter o.  
4) Press [8] six times to enter v.  
5) Press [4] six times to enter i.  
6) Press [3] five times to enter e.  
7) Press [7] eight times to enter s.  
8) Press [Menu/Select] to end your text entry.  
If you make a mistake while entering a name, use [right] or [left]  
on the four-way function key to move the cursor to the incorrect  
character. Press [Clear/Int’com] to erase the wrong character,  
and then enter the correct character. To delete all characters,  
press and hold [Clear/Int’com].  
 
ꢀ2  
Using Your Accessory Handset  
Making and Receiving Calls  
With the earpiece  
With the speaker phone  
ꢀ) Pick up the handset from the ꢀ) Pick up the handset  
cradle.  
2) Dial the number.  
3) Press [ /Flash].  
from the cradle.  
2) Dial the number.  
Make a  
call  
3) Press [  
].  
ꢀ) Pick up the handset.  
(If AutoTalk is on, the phone  
answers when you pick up the  
handset from the cradle.)  
ꢀ) Pick up the handset.  
2) Press [ ].  
Answer  
a call  
2) Press [ /Flash].  
(If Any Key Answer is on, you  
can press any key on the dial  
pad.)  
Hang up Press [ ] or return the handset to the cradle.  
Adjusting the Volume  
Choose from four ringer volume settings (off, low, medium,  
and high). With the phone in standby, press [ ] or [ ].  
The display shows the current volume level and the handset  
sounds the ringer at that level. Use [ ] to make the ringer  
] to make it softer or turn it completely  
Ringer  
Volume  
volume louder or [  
off.  
Choose from six volume levels for the earpiece. While on a  
call, press [ ] to make the earpiece volume louder or  
] to make it softer.  
Earpiece  
Volume  
[
Choose from six volume levels for the handset  
speakerphone. While on a speakerphone call, press  
Speaker  
Volume  
[
] to make the speaker volume louder or [  
] to make  
it softer.  
Notes: If you set the ringer volume to OFF, the handset won’t ring.  
Other stations will ring according to their individual settings.  
The handset earpiece and the handset speaker have separate  
volume settings.  
 
ꢀ3  
Using Caller ID and Call Waiting  
If you subscribe to Caller ID, you can store up to thirty Caller  
ID numbers in each handset. Caller ID records are stored from  
newest to oldest. Once your Caller ID list is full and you receive  
an incoming call, the oldest record will be automatically deleted  
to make room for the new record.  
To open the Caller ID list, press [ ]. The phone will show the  
number of new Caller ID records (that is, records you have not  
reviewed yet) and the total number of stored records. From the  
screen, you have the following options:  
Press [  
] to scroll through CID records.  
Scroll through the  
records  
CID records are stored chronologically from  
newest to oldest. (New records have an  
asterisk next to the received time.)  
ꢀ) Find the record you want to store and  
press [Menu/Select].  
Store a record in the  
phonebook  
2) Move the cursor to STORE INTO PB, and  
press [Menu/Select].  
Find the entry you want to dial and press  
Dial a record  
[ /Flash] or [  
].  
ꢀ) Find the entry you want to delete and press  
[Menu/Select].  
Delete a record  
2) Move the cursor to DELETE ENTRY, and  
press [Menu/Select].  
Delete all records  
Press [Menu/Select].  
Press [ ], or press [  
] (the left key on the  
Exit the Caller ID list  
four-way function key) if you are on a call.  
Using Call Waiting  
If you subscribe to call waiting, a tone sounds if a call comes in  
when you are on the phone. If you subscribe to Caller ID on call  
waiting, the Caller ID information of the waiting call appears on  
the display. Press [ /Flash] on the handset to accept the waiting  
call. After a short pause, you will hear the new caller. To return to  
the original caller, press [ /Flash] on the handset again.  
 
14  
Using the Phonebook  
Your handset can store up to seventy names and numbers in  
your phonebook. When all the phonebook entries are full, you  
will hear a beep and MEMORY FULL appears. You cannot store  
any additional names and numbers unless you delete some of  
the existing ones.  
Press [ ] to enter the phonebook. Once in the phonebook, you  
have the following options:  
Press [  
alphabetically.  
] to scroll through the phonebook  
Scroll through  
the entries  
Jump to  
entries that  
start with a  
certain letter  
Press the number key corresponding to the letter you  
want to jump to.  
ꢀ) Press [Menu/Select].  
Store a new  
entry  
2) Move the cursor to CREATE NEW, and then press  
[Menu/Select].  
ꢀ) Find the entry you want to copy, and press  
Copy one  
entry to  
another  
station  
[Menu/Select].  
2) Move the cursor to COPY, and press [Menu/Select].  
3) Move the cursor to select the station you want to  
copy the entry to, and press [Menu/Select].  
Copy all  
entries to  
another  
station at  
once  
ꢀ) Press [Menu/Select], and then select COPY ALL.  
2) Move the cursor to select the station you want to  
copy the entries to, and press [Menu/Select].  
3) Move the cursor to YES, and press [Menu/Select].  
ꢀ) Find the entry you want to dial.  
Dial an entry  
2) Press [ /Flash] or [  
].  
ꢀ) Find the entry you want to delete, and press  
Delete an  
entry  
[Menu/Select].  
2) Move the cursor to DELETE, and press [Menu/Select].  
ꢀ) Press [Menu/Select].  
Delete all  
entries  
2) Move the cursor to DELETE ALL, and press  
[Menu/Select].  
Close the  
phonebook  
Press [ ], or press [  
] again if you are on a call.  
 
15  
Redialing a Number  
To redial one of the last five numbers dialed on this handset,  
press [Redial/Pause]. This opens the redial list. Use [  
] and  
[
[
] to find the number you want to dial, and press [ /Flash] or  
] in standby, or press [Menu/Select] during a call.  
Muting the Ringer (One Call Only)  
While the handset is ringing, press [ /Mute] or [ ] to mute the  
ringer for this call. The phone will ring again on the next call. (The  
handset must be off the cradle to mute the ringer.)  
Muting the Microphone  
To mute the microphone so the caller can't hear you, press  
[
/Mute] during a call. MUTE ON and appear in the display.  
Press [ /Mute] again to cancel muting.  
Privacy Mode  
To prevent other stations from interrupting a call, press  
[Menu/Select]. Move the cursor to CALL PRIVACY, and then  
press [Menu/Select]. PRIVACY MODE ON and P appear in the  
display. Repeat the procedure to turn off privacy mode.  
Adjusting the Audio Tone  
If you aren't satisfied with your phone's audio quality, you can  
adjust the Audio Tone of the earpiece. While on a call, press  
[Menu/Select]. Move the cursor to select AUDIO TONE, and  
then press [Menu/Select]. Move the cursor to select desired  
audio tone options: HIGH TONE, NATURAL TONE, or LOW  
TONE. (The default setting, Natural Tone, is recommended for  
hearing aid users.) Press [Menu/Select] to confirm. After two  
seconds, the displayed audio tone is set, and the display returns  
to normal. Audio tone adjustments only apply to the earpiece,  
not the speakerphone.  
 
16  
Using Hold, Conference, Transfer and Intercom  
Press [Clear/Int’com]. If you leave a caller on  
hold for more than five minutes, the call will be  
Put a call on hold  
disconnected. To return to the party on hold, press  
[ /Flash] or [  
].  
To join a call already in progress, press [ /Flash]  
Join a call already  
in progress  
or [  
]. You can hang up normally; the other  
station remains connected to the call.  
Press [Clear/Int’com]; the call is placed on hold.  
Use [  
] or [  
] to select the station you want  
to transfer the call to, and press [Menu/Select]. (To  
page all stations at once, select ALL.) When the  
other station answers, you can talk to the station;  
the outside call remains on hold. If the other  
station accepts the call, you will be disconnected.  
Transfer a call  
To cancel the transfer and return to the call,  
Cancel a transfer  
press [ /Flash] or [  
].  
To answer the transfer page and speak to the  
transferring station, press [ /Flash] or [Clear/  
Int’com]. To accept the call and speak to the  
caller, press [ /Flash] again.  
Accept a  
transferred call  
With the phone in standby, press [Clear/Int’com].  
Use [  
] or [  
] to select the station you want  
Make an intercom  
page  
to talk with, and then press [Menu/Select]. (If you  
select ALL, all other stations will be paged.)  
Cancel a page  
To cancel the intercom page, press [ ].  
Answer an  
intercom page  
Press [ /Flash] or [Clear/Int’com].  
Note: When answering a transferred call or an intercom page, if  
AutoTalk is on, the handset will automatically answer the page  
when you pick up the handset from the cradle. If Any Key  
Answer is on, you can also press any key on the handset’s dial  
pad.  
 
ꢀ7  
Accessing Your Answering System  
If your base has an answering system, you can use your handset  
to get your messages and change your answering system setup.  
The answering system plays your new messages (that you  
have not listened to yet) first. If you have no new messages, the  
system plays your old messages.  
You have the following options:  
Press [ /Mute]. The system announces the number of  
Playing  
new  
new and old messages, then plays the first new message  
followed by the day and time it was received. Then the  
messages system plays the new messages in the order they were  
received.  
Press [  
] once to go to the beginning of the current  
] repeatedly to go back to a previous message.  
] to go to the beginning of the next message.  
1/  
message.  
Repeating  
a message  
Press [  
1/  
Skipping a  
message  
Press [  
3/  
Deleting a While a message is playing, press [  
4/  
message The message is permanently deleted.  
].  
Playing old After you listen to your new messages, press [ /Mute]  
messages again to play your old messages.  
Press [  
] to stop the message playback.  
5/  
Press [ ] to exit the system and return to standby,  
or press [ ] to restart the message playback.  
Exiting the  
message  
review  
2/  
Screening Calls  
If your base has an answering system, you can listen to callers  
as they leave a message. Press [ /Mute] when the system is  
answering to listen to the caller without answering the phone.  
 
18  
Accessing Voicemail  
If your base doesn't have an answering system and you  
subscribe to a voice mail service, you can program your handset  
to automatically dial the access number.  
ꢀ) Press [Menu/Select].  
2) Move the cursor to HANDSET SETUP and press  
[Menu/Select].  
3) Move the cursor to EDIT VOICE MAIL and press  
[Menu/Select].  
4) Enter your access number (up to twenty digits). If you need  
the phone to wait before sending the next digits, press  
[Redial/Pause] to insert a two-second pause. For a longer  
pause, press [Redial/Pause] multiple times. Each pause  
counts as one digit.  
5) Press [Menu/Select] when you are finished.  
Once you program your access number, press [ /Mute] to dial  
your voice mail service.  
Maintenance  
Battery Life  
With average use, your battery talk time will be approximately ten  
hours and standby time will be approximately seven days. For  
optimum performance, be sure to return the handset to the cradle  
after each call. The actual talk time duration will be reduced in  
proportion to the amount of time the handset is off the cradle.  
Low Battery Alert  
When the battery pack is very low, the display shows LOW  
BATTERY - CHARGE HANDSET and the empty battery icon. If  
the phone is in standby, none of the keys will operate. If you are  
on a call, complete your conversation as quickly as possible, and  
return the handset to the cradle.  
Battery Replacement and Handling  
With normal use, the battery lasts about one year. If the talk  
time becomes short even after the battery is recharged, please  
replace the battery. To purchase a replacement battery, contact  
 
19  
Warning:  
To avoid the risk of personal injury or property damage from fire or  
electrical shock, use only the BT-1008 battery pack.  
Caution:  
- This equipment contains a rechargeable Nickel-Metal-Hydride  
battery.  
- Do not remove the batteries to charge them.  
- Never throw the battery in a fire or disassemble or heat it.  
- Do not remove or damage the battery casing.  
- Nickel is a chemical known to state of California to cause cancer.  
- Do not short-circuit the battery.  
- Do not charge the battery used in this equipment in any charger  
other than the one designed to charge this battery as specified in  
the owner's manual. Using another charger may damage the  
battery or cause the battery to explode.  
- Rechargeable batteries must be recycled or disposed of properly.  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed by  
the owner's manual, could void your authority to operate this product.  
This device complies with part 15 of the FCC rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) This device must accept any interference received,  
including interference that may cause undesired operation. Privacy of  
communications may not be ensured when using this phone.  
To insure the safety of users, the FCC has established criteria for  
the amount of radio frequency energy various products may produce  
depending on their intended usage. This product has been tested  
and found to comply with the FCC's exposure criteria. For body worn  
operation, the FCC RF exposure guidelines were also met when used  
with the Uniden accessories supplied or designed for this product. Use  
of other accessories may not ensure compliance with FCC RF exposure  
guidelines and should be avoided.  
I.C. Notice  
Terminal Equipment  
NOTICE: This equipment meets the applicable Industry Canada Terminal  
Equipment Technical Specifications. This is confirmed by the registration  
number. The abbreviation, IC, before the registration number signifies  
that registration was performed based on a Declaration of Conformity  
 
20  
indicating that Industry Canada technical specifications were met. It does  
not imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal  
equipment is marked on the equipment itself. The REN assigned to  
each terminal equipment provides an indication of the maximum number  
of terminals allowed to be connected to a telephone interface. The  
termination on an interface may consist of any combination of devices  
subject only to the requirement that the sum of the Ringer Equivalence  
Numbers of all the devices does not exceed five.  
Radio Equipment  
The term "IC:" before the radio certification number only signifies  
that Industry Canada technical specifications were met. Operation is  
subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including  
interference that may cause undesired operation of the device. "Privacy  
of communications may not be ensured when using this telephone".  
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty  
service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the  
original retail owner, this Uniden Product to be free from defects in  
materials and craftsmanship with only the limitations or exclusions set  
out below.  
WARRANTY DURATION: This warranty to the original user shall  
terminate and be of no further effect ꢀ2 months after the date of original  
retail sale. The warranty is invalid if the Product is (A) damaged or not  
maintained as reasonable or necessary, (B) modified, altered, or used  
as part of any conversion kits, subassemblies, or any configurations  
not sold by Uniden, (C) improperly installed, (D) serviced or repaired by  
someone other than an authorized Uniden service center for a defect  
or malfunction covered by this warranty, (E) used in any conjunction  
with equipment or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone other than as detailed  
by the owner's manual for this product.  
STATEMENT OF REMEDY: In the event that the product does not  
conform to this warranty at any time while this warranty is in effect,  
warrantor will either, at its option, repair or replace the defective unit and  
return it to you without charge for parts, service, or any other cost (except  
shipping and handling) incurred by warrantor or its representatives  
in connection with the performance of this warranty. Warrantor, at  
its option, may replace the unit with a new or refurbished unit. THE  
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE  
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF  
 
2ꢀ  
AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY  
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER  
OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not  
allow this exclusion or limitation of incidental or consequential damages  
so the above limitation or exclusion may not apply to you.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state. This  
warranty is void outside the United States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:  
If, after following the instructions in the owner's manual you are certain  
that the Product is defective, pack the Product carefully (preferably in  
its original packaging). Disconnect the battery from the Product and  
separately secure the battery in its own separate packaging within the  
shipping carton. The Product should include all parts and accessories  
originally packaged with the Product. Include evidence of original  
purchase and a note describing the defect that has caused you to return  
it. The Product should be shipped freight prepaid, by traceable means,  
to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
May be covered under one or more of the following U.S. patents:  
4,797,916  
5,533,010  
5,661,780  
5,732,355  
5,794,152  
5,912,968  
5,987,330  
6,314,278  
6,782,098  
6,901,271  
7,030,819  
5,426,690  
5,574,727  
5,663,981  
5,754,407  
5,801,466  
5,915,227  
6,044,281  
6,418,209  
6,788,920  
6,907,094  
7,146,160  
5,434,905  
5,581,598  
5,671,248  
5,758,289  
5,825,161  
5,929,598  
6,070,082  
6,618,015  
6,788,953  
6,914,940  
7,203,307  
5,491,745  
5,650,790  
5,696,471  
5,768,345  
5,864,619  
5,930,720  
6,125,277  
6,671,315  
6,839,550  
6,953,118  
7,206,403  
5,493,605  
5,660,269  
5,717,312  
5,787,356  
5,893,034  
5,960,358  
6,253,088  
6,714,630  
6,889,184  
7,023,176  
Other patents pending.  
 
22  
VISIT OUR WEBSITE AT  
WWW.UNIDEN.COM IF YOU  
Have A Question Or A Problem.  
Or call our Customer Hotline at 1-800-297-1023  
during regular business hours.*  
Are Looking For A Part Or Accessory.  
Or call our Parts Department at 1-800-554-3988  
during regular business hours.*  
Need Special Assistance Due To A Disability.  
Or call our Accessibility help line at 1-800-874-9314  
(voice or TTY).  
© 2008 Uniden America Corp.,  
Fort Worth, Texas. Printed in China.  
* Central Standard Time.  
Detailed customer service hours  
UCZZ21539EZ(0)  
 
 

Tasco Telescope REDDOT Scope User Manual
Thermador Cooktop GGN30 User Manual
Toshiba CRT Television 26DF56 User Manual
Toshiba Laptop A215 S7472 User Manual
Tripp Lite Power Supply 1050M User Manual
UltraViolet Devices Air Cleaner Air Disinfection User Manual
Uniden Automobile Accessories UH088SX User Manual
Uniden Scanner BC95XLT User Manual
Vinotemp Refrigerator BC 58 User Manual
VTech Cordless Telephone VT5831 User Manual