Uniden Cordless Telephone DCX730 Series User Manual

 
Welcome  
Congratulations on your purchase of the Uniden DCX730  
accessory handset and charger. You can place this fully  
featured cordless handset anywhere your home has AC power.  
Note: Illustrations in this manual are used for explanation  
purposes. Some illustrations may differ from the actual unit.  
Accessibility  
Uniden provides a customer service hotline for accessibility  
questions. If you have a disability and need customer service  
assistance or if you have any questions about how Uniden's  
products can accommodate persons with disabilities, please  
call the accessibility voice/TTY line: 1-800-874-9314.  
Our customer care hours as well as accessibility information  
"Accessibility" link." If your call is received outside of our  
business hours, you can leave us a message and we will call  
you back.  
Important!  
The DCX730 accessory handset will not operate until it is  
registered to a Uniden main base. This manual describes how  
to set up your new handset; for more detailed instructions on  
operating your new handset, please refer to the manual  
supplied with your base.  
Terminology Used in this Manual  
The main part of the phone that connects to your phone line  
and lets you make and receive calls.  
Base  
A cradle that charges an accessory handset. It connects to  
power but not to a phone line.  
Charger  
Accessory A handset that works with an expandable phone base.  
Handset  
Standby  
Station  
Talk  
Accessory handsets must be registered to a base.  
The handset is not in use. If it is off the cradle, no line has  
been activated. No dial tone is present.  
Any handset or the base.  
A telephone line has been activated on the handset or the  
base, enabling a dial tone.  
Uniden® is a registered trademark of Uniden America Corporation.  
1
 
Compatible Bases  
This handset is compatible with Uniden's 2.4 GHz Digital  
Expandable phone system: the DCT736/DCT738 series, the  
DCT746/DCT748 series, the DCT756/DCT758 series, the  
DMX776/778 series, and the DCT646/DCT648 series. Visit  
bases.  
Installing the Accessory Handset  
Checking the Package Contents  
Make sure your package contains the following items. If any  
items are missing or damaged, contact our Customer Service  
Hotline. See back cover page for contact information.  
Cordless Handset  
Charging Cradle  
AC Adapter, model # AD-0005  
Input: 120V AC 60 Hz  
Output: 9V DC 210 mA  
Rechargeable NiMH Battery  
Pack, model # BT-1004  
Capacity: 500 mAh, 3.6V  
Beltclip  
Printed Material  
Installing the Battery  
Follow the steps below to install the  
rechargeable battery pack.  
1. Using the finger indentation, press in  
on the battery case cover and slide it  
down to remove it.  
2. Plug the battery connector into the  
battery compartment jack. Be sure to  
match the red and black wires to the  
label near the jack.  
3. Gently pull on the battery wires. If the  
battery connector comes loose, try  
connecting it again.  
4. Replace the battery case cover and  
slide it up until it clicks into place.  
Note: Use only the Uniden BT-1004  
rechargeable battery pack supplied  
with your cordless telephone.  
2
 
Charging the Accessory Handset  
The handset is powered by a rechargeable battery pack that  
automatically recharges when the handset is placed in the  
charger.  
1. Connect the AC  
adapter to the DC IN  
9V jack and to a  
120V AC outlet that  
is not controlled by a  
wall switch.  
Caution: Use only  
the Uniden AD-0005  
adapter.  
2. Set the charger on a  
desk or tabletop, and  
place the handset in  
the charger with the keypad facing forward.  
3. Make sure that the charge LED illuminates. If the LED does not  
illuminate, check to see that the AC adapter is plugged in and  
the handset makes good contact with the charging contacts on  
the charging cradle.  
4. Charge the handset battery pack for at least 15-20 hours before  
using your new handset for the first time.  
Registering the Handset  
You must register the handset to the base before you can use it.  
Only one handset can be registered at a time. (If an accessory  
handset has ever been registered to a base, you must reset the  
handset before you can register it to a new base.)  
Note: The model number for your telephone base is located  
on the bottom of main base unit.  
3
 
For DCT73 and DCT75  
Series Bases (DCT736,  
DCT738, DCT756, DCT7565,  
DCT758, DCT7585)  
To register to a DCT73 or  
DCT75 series base, place the  
accessory handset in the  
base. While the handset is  
registering, HANDSET  
REGISTERING appears in  
the LCD. When  
REGISTRATION COMPLETE  
is displayed, the handset has  
been registered to the base.  
If REGISTRATION FAILED  
appears, remove the handset  
from the base and try again.  
For Other Base Models  
1. Select your base model from the list and follow the directions:  
MODEL  
DIRECTIONS:  
DCT646  
DCT746  
Disconnect the base AC adapter. Press and hold  
[find handset] while you reconnect the adapter.  
Disconnect the base AC adapter. Press and hold  
[intercom] while you reconnect the adapter.  
DCT6465  
DCT6485  
Disconnect the base AC adapter. Press and hold  
[intercom/find handset] while you reconnect the adapter.  
DCT648  
DCT748  
DCT7488  
Disconnect the base AC adapter. Press and hold  
[find hs/  
]
and  
[
]
while you reconnect the adapter.  
Press the MENU soft key. Scroll down to HS  
REGISTRATION and press the OK soft key.  
DMX776  
DMX778  
Press and hold the registration button on the bottom of the  
base until the base LEDs start blinking.  
2. On the handset, press and hold [#/  
]
until you hear a beep and  
see HANDSET REGISTERING in the display.  
3. When REGISTRATION COMPLETE is displayed, the handset  
has been registered to the base. If REGISTRATION FAILED  
appears, please try these steps again.  
4
 
Resetting the Handset  
If you want to register the handset to a different base or  
replace a handset with another one, you must first clear the  
registration information from the base and the handset.  
1. Press and hold [ ] and  
[#/  
]
for at least 5 seconds,  
until the SYSTEM RESET  
menu appears.  
2. Select the DEREGISTER  
HS submenu by pressing [select/  
].  
WHICH HANDSET? appears in the display.  
3. Use  
[
]
or  
[
]
to select the handset ID to be de-  
registered from the list, and then press [select/  
].  
DEREGISTER HS appears.  
4. Press  
[
]
]
to move the cursor to YES, and then press  
. You will hear a confirmation tone.  
[select/  
Resetting the Handset Without the Base  
If the original base this handset was registered to is not  
available for some reason (for example, it is lost or somehow  
incapacitated), you can still reset the handset and use it with  
another base.  
1. Press and hold [ ] and [#/  
2. Press ] to move the cursor to REPLACING BASE and  
then press [select/ . REPLACE BASE appears.  
]
for more than 5 seconds.  
[
]
3. Press  
[
]
]
to move the cursor to YES, and then press  
[select/  
. You hear a confirmation tone, and the handset  
deletes its own link to the base without trying to contact  
the base.  
4. Register the handset to the new base.  
5
 
Using the Interface  
Parts of the Handset  
1. Antenna  
2. Speaker phone  
speaker and ringer  
14.  
[
]
(up)  
9. [ /flash]  
(talk/flash)  
10. (phonebook)  
11. /tone/  
15.[ ] (end call)  
[
]
16.  
17.  
[
[
]
]
(Caller ID)  
(down)  
3. Battery  
[
]
compartment  
12.[xfer/intercom]  
4. New message LED  
5. Earpiece  
6. LCD display  
7. [menu/clear]  
8. [redial/pause]  
18.[#/  
19.  
20.Microphone  
]
(pound)  
(transfer/intercom)  
[
]
(speaker)  
13.[select/  
(select/messages)  
]
21.Charging contacts  
6
 
Reading the Display  
The handset display uses icons to tell you the status of your  
phone. The table below lists the icons and what they mean.  
ICON  
STATUS  
DESCRIPTION  
The battery icon indicates the handset  
battery status:  
full, medium, low, and empty.  
Standby/  
Talk  
The ringer off icon indicates that the  
Standby  
Talk  
ringer is turned off.  
The mute icon appears when you mute  
the handset.  
The call record icon appears while  
recording a conversation.  
Talk  
The boost icon appears when the  
Clarity Boost feature is activated.  
Talk  
The speaker icon appears when the  
handset speaker phone is in use.  
Talk  
The privacy icon appears when  
Privacy Mode is turned on.  
Talk  
The Standby Screen  
When the phone is in standby, the display shows the following:  
Using the Four-way Function Key  
Your handset has a four-way  
function key that allows you to  
Volume up  
move the cursor or pointer on  
the display and access the  
most commonly used features  
at the touch of a button. Press  
the left side of the key to open  
the phonebook. Press the right  
side to open the Caller ID list.  
Open the  
phonebook  
Open the  
Caller ID list  
down  
Four-way  
function key  
Volume  
7
 
To use this four-way key, place your thumb over the key on the  
handset and move to the four positions to get the feel of how it  
moves and operates.  
Using the Handset Menus  
To open the menu, press [menu/clear]. Select the option you  
want by pressing the four-way function key. This will move the  
cursor; the option currently selected has a triangle beside it.  
Activate the selected option by pressing [select/  
menu and return to standby, press [ ]  
]. To exit the  
.
If you do not press a key within 30 seconds, the phone will  
time out and exit the menu. When setting the date and time,  
the time-out period is extended to two minutes.  
Making and Receiving Calls  
With the earpiece  
With the speaker phone  
1.Remove the handset from  
the charger.  
1.Remove the handset from  
the charger.  
Make a  
call  
2.Dial the number.  
2.Dial the number.  
3.Press  
1.Pick up the handset.*  
2.Press  
[
].  
3.Press [ /flash]  
.
1.Pick up the handset.*  
2.Press [ /flash].**  
Answer  
a call  
[
].  
Hang  
up  
Press [ ] or return the  
handset to the cradle.  
Press [ ] or return the  
handset to the cradle.  
* If AutoTalk is on, the phone answers when you remove the  
handset from the charging cradle.  
** If Any Key Answer is on, you can press any key in the  
twelve-key pad.  
Using Caller ID and Call Waiting  
If you subscribe to Caller ID, you can store up to 100 Caller ID  
records. Your phone shares memory between your phonebook  
and Caller ID entries. If you have 100 phonebook entries,  
Caller ID records won't be saved (but will display when the  
call comes in).  
Press  
[
]
to open the Caller ID record list. The first thing you  
will see is the summary screen. From the summary screen,  
you have the following options:  
8
 
To scroll through the records from A to Z,  
press . To scroll trough the records from Z to  
A press  
Scroll through the  
records  
[
]
[
].  
Jump to records that  
start with a certain  
letter  
Press the number key corresponding to the letter  
you want to jump to.  
Find the record you want to store and press  
Store a record in the  
phonebook  
[select/  
Find the entry you want to dial and press  
[ /flash] or  
Find the entry you want to dial and press  
[menu/clear]  
].  
Dial a record  
[
].  
Delete a record  
.
Delete all records  
Press [menu/clear]  
.
Exit the Caller ID list  
Press [ ] or press  
[
]
again if you are on a call.  
Using Call Waiting  
If you subscribe to call waiting, a tone sounds if a call comes  
in when you are on the phone. If you subscribe to Caller ID on  
call waiting, the Caller ID information of the waiting call  
appears on the display. Press [ /flash] on the handset to  
accept the waiting call. After a short pause, you will hear the  
new caller. To return to the original caller, press [ /flash] on the  
handset again.  
Redialing a Number  
To redial one of the last 3 numbers dialed on this handset,  
press [redial/pause] when the phone is in standby. This opens  
the redial list. Use  
dial, and press [ /flash] or  
, and then [redial/pause] to redial the last number dialed.)  
[
]
and  
[
]
to find the number you want to  
[
].(You can also press [ /flash] or  
[
]
Using the Phonebook  
You can store up to 100 names and numbers in the  
phonebook. Your handset shares memory between your  
phonebook and Caller ID entries. When all the phonebook  
entries are full, you will hear a beep and MEMORY FULL  
appears. You cannot store any additional names and numbers  
unless you delete some of the existing ones.  
9
 
Press  
[
]
to enter the phonebook. Once in the phonebook,  
you have the following options:  
To scroll through the phonebook from A to Z, press  
. To scroll through the phonebook from Z to A  
press  
Scroll through  
the entries  
[
]
[
].  
Jump to entries  
that start with a  
certain letter  
Press the number key corresponding to the letter you  
want to jump to.  
Move the cursor to STORE NEW, then press  
Store a new  
entry  
[select/  
].  
1.Move the cursor to COPY and press [select/  
]
.
2.Select the handset you want to copy the entries to and  
press [select/  
3.Select ONE MEMORY or ALL MEMORY and press  
[select/  
4 If you choose ONE MEMORY, find the entry you want  
to copy and press [select/  
].  
Copy entries to  
another handset  
].  
].  
1.Move the cursor to DIAL/EDIT and press [select/  
2.Find the entry you want to dial.  
].  
Dial an entry  
3.Press [ /flash] or  
[
].  
1.Move the cursor to DIAL/EDIT and press [select/  
]
.
Delete an entry  
Delete all entries  
2.Find the entry you want to delete.  
3.Press [menu/clear]  
.
Move the cursor to DELETE ALL and press [select/  
Press [ ] or press again if you are on a call.  
].  
Close the  
phonebook  
[
]
Adjusting the Volume  
Choose from three ringer volume settings (off, low, and  
Ringer  
Volume  
high). With the phone in standby, use  
the ringer volume.  
[
]
and  
[
]
to adjust  
Choose from six volume levels for the earpiece. While on a  
Earpiece  
Volume  
call, press  
[
]
to make the earpiece volume louder or  
[
]
to make it softer.  
Choose from six volume levels for the handset  
Speaker  
Volume  
speakerphone. While on a call, press  
[
]
to make the  
speaker volume louder or  
[
]
to make it softer.  
10  
 
Hold, Conference, Transfer, and Intercom  
Press [xfer/intercom]. If you leave a caller on hold for  
Put a call on  
more than five minutes, the call will be disconnected.  
hold  
To return to the party on hold, press [ /flash] or  
To join a call already in progress, press [ /flash] or  
You can hang up normally; the other station  
[
].  
Join an in-  
progress call  
[
].  
remains connected to the call.  
Press [xfer/intercom]; the call is placed on hold. Use  
or to select the station you want to transfer  
the call to, and press [select/ . (To page all  
[
]
[
]
]
Transfer a call  
stations at once, select ALL.) When the other station  
answers, you can talk to the station; the outside call  
remains on hold. If the other station accepts the call,  
you will be disconnected.  
To cancel the transfer and return to the call, press  
Cancel a  
transfer  
[ /flash] or  
[
].  
To answer the transfer page and speak to the  
transferring station, press [ /flash] or [xfer/intercom]  
To accept the call and speak to the caller, press  
Accept a  
transferred  
call  
.
[ /flash] again  
With the phone in standby, press [xfer/intercom]  
Use or to select the station you want to talk  
. (If you select ALL, all  
.
.
Make an  
intercom page  
[
]
[
]
with, then press [select/  
]
other stations will be paged.)  
Cancel a page  
To cancel the intercom page, press [ ]  
.
Press [ /flash] or [xfer/intercom]. If AutoTalk is on,  
the handset automatically answers the page when  
you remove it from the cradle.  
Answer an  
intercom page  
Muting the Ringer (One Call Only)  
While the handset is ringing, press [ ] to mute the ringer for  
this call. The phone will ring again on the next call. (The  
handset must be off the cradle to mute the ringer.)  
11  
 
Muting the Microphone  
To mute the microphone so the caller can't hear you, press  
[menu/clear]. Move the cursor to select MUTE and then press  
[select/  
]. MUTE ON and appear in the display. Repeat the  
procedure to cancel muting.  
Privacy Mode  
To prevent other stations from interrupting a call, press  
[menu/clear]. Move the cursor to select PRIVACY MODE and  
then press [select/  
]. PRIVACY MODE ON and P appear in  
the display. Repeat the procedure to turn off privacy mode.  
Adjusting the Audio Tone  
If you aren't satisfied with your phone's audio quality, you can  
adjust the Audio Tone of the earpiece. While on a call, press  
[select/  
]
to cycle through the three audio tone options: low,  
natural and high. (The default setting, Natural Tone, is  
recommended for hearing aid users.) When the desired option  
appears on the display, stop. After two seconds, the displayed  
audio tone is set, and the display returns to normal.  
Using the Clarity Boost Feature  
If you encounter interference while you are on a call, you can  
manually improve the sound by turning on the clarity boost  
feature. Press [menu/clear], move the cursor to select  
CLARITY BOOST, and then press [select/  
B appear in the display.  
]. BOOST ON and  
Use the same procedure to turn off clarity boost feature,  
BOOST OFF appears.  
Accessing Your Answering Machine  
If your base has an answering machine, you can use your  
handset to get your messages and change your answering  
machine setup. To access the answering machine, press  
[select/  
]. The answering machine announces the number of  
new and old messages and then wait for your next command.  
You have the following options:  
12  
 
Press  
[
/2]. The system plays the message  
Play messages  
then announces the time and date the  
message was received.  
Press  
message. Press  
to a previous message.  
[
/1] to go to the start of the current  
[
/1] repeatedly to go back  
Repeat a message  
Press /3] to go to the beginning of the next  
[
Skip a message  
message.  
While a message is playing, press  
message is permanently deleted.  
[/4]. The  
Delete a message  
End message  
review  
Press  
[
/5] to stop the message playback.  
Press [7] to start recording. Press  
stop.  
[
/5] or [7] to  
Record a memo  
Turn the answering  
machine on or off  
Press [6] to turn the answering machine on.  
Press [9] to turn it off.  
Press [8] to start recording. Press  
[
/5] or [8] to  
Record a greeting  
Listen to Help  
stop.  
Press [0] to hear the Help prompts.  
Press [ ] to exit the system and return to  
standby.  
Exit and hang up  
Screening Calls  
If your base has an answering machine, you can listen to  
callers as they leave a message. Press [select/  
]
when the  
system is answering to listen to the caller without answering  
the phone.  
Accessing Voicemail  
If you subscribe to a voice mail service, you can program your  
handset to automatically dial the access number.  
1. Press [menu/clear]  
.
2. Move the cursor to HANDSET SETUP and press [select/  
]
.
3
Move the cursor to EDIT VOICE MAIL and press [select/  
].  
13  
 
4. Enter your access number (up to 20 digits). If you need the  
phone to wait before sending the next digits, press  
[redial/pause] to insert a two-second pause. For a longer  
pause, press [redial/pause] multiple times. Each pause counts  
as one digit.  
5. Press [select/  
]
when you are finished.  
Once you program your access number, press [select/  
dial your voice mail service.  
]
to  
Maintenance  
Battery Life  
With average use, your battery talk time will be approximately  
7 hours and standby time will be approximately 10 days. For  
optimum performance, be sure to return the handset to the  
cradle after each call. If the handset is left off of the charging  
cradle, the actual talk time duration will be reduced respective  
to the amount of time the handset is off the cradle.  
Note:  
Do not place the power cord where it creates a trip hazard or  
where it could become chafed and create a fire or electrical  
hazard.  
Low Battery Alert  
When the battery pack is very low, the display shows LOW  
BATTERY and the empty battery icon. If the phone is in  
standby, none of the keys will operate. If you are on a call,  
complete your conversation as quickly as possible, and return  
the handset to the charging cradle.  
Battery Replacement and Handling  
With normal usage, your battery should last about one year. If  
the talk time becomes short even after the battery is recharged,  
please replace the battery. You can purchase a replacement  
battery by calling Uniden's Parts department. See the back  
cover page for contact information.  
Warning  
To avoid the risk of personal injury or property damage from  
fire or electrical shock, use only the BT-1004 battery pack.  
14  
 
Caution:  
- This equipment contains a rechargeable Nickel-Metal-  
Hydride battery.  
- Do not remove the batteries to charge them.  
- Never throw the battery in a fire or disassemble or heat it.  
- Do not remove or damage the battery casing.  
- Nickel is a chemical known to state of California to cause  
cancer.  
- Do not short-circuit the battery.  
- Do not charge the battery used in this equipment in any  
charger other than the one designed to charge this battery  
as specified in the owner's manual. Using another charger  
may damage the battery or cause the battery to explode.  
- Rechargeable batteries must be recycled or disposed of  
properly.  
Clean the Battery Contacts  
To maintain a good charge, clean the  
charging contacts on the handset  
once a month. Dampen a cloth with  
plain water. Gently rub the damp  
cloth over the charging contacts until  
all visible dirt is removed. Dry the  
contacts thoroughly before returning  
the handset to the charging cradle.  
Caution: Do not use any chemical  
products (benzene, alcohol, paint  
thinner, etc.), or you may discolor  
the surface and damage the finish.  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed  
by the owner's manual, could void your authority to operate this  
product.  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) This device must accept any interference  
received, including interference that may cause undesired operation.  
15  
 
Privacy of communications may not be ensured when using this  
phone.  
To insure the safety of users, the FCC has established criteria for the  
amount of radio frequency energy various products may produce  
depending on their intended usage. This product has been tested and  
found to comply with the FCC's exposure criteria. For body worn  
operation, the FCC RF exposure guidelines were also met when used  
with the Uniden accessories supplied or designed for this product.  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines and should be avoided.  
I.C. Notice  
Terminal Equipment  
NOTICE:This equipment meets the applicable Industry Canada  
Terminal Equipment Technical Specifications. This is confirmed by the  
registration number. The abbreviation, IC, before the registration  
number signifies that registration was performed based on a  
Declaration of Conformity indicating that Industry Canada technical  
specifications were met. It does not imply that Industry Canada  
approved the equipment.  
NOTICE:The Ringer Equivalence Number (REN) for this terminal  
equipment is marked on the equipment itself. The REN assigned to  
each terminal equipment provides an indication of the maximum  
number of terminals allowed to be connected to a telephone interface.  
The termination on an interface may consist of any combination of  
devices subject only to the requirement that the sum of the Ringer  
Equivalence Numbers of all the devices does not exceed five.  
Radio Equipment  
The term "IC:" before the radio certification number only signifies that  
Industry Canada technical specifications were met. Operation is  
subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of the  
device. "Privacy of communications may not be ensured when using  
this telephone".  
16  
 
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty service.  
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF  
WARRANTY: Uniden warrants, for one year, to the original retail owner, this  
Uniden Product to be free from defects in materials and craftsmanship with only  
the limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the original user shall terminate and  
be of no further effect 12 months after the date of original retail sale. The warranty  
is invalid if the Product is (A) damaged or not maintained as reasonable or  
necessary, (B) modified, altered, or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C) improperly installed,  
(D) serviced or repaired by someone other than an authorized Uniden service  
center for a defect or malfunction covered by this warranty, (E) used in any  
conjunction with equipment or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone other than as detailed by the  
owner's manual for this product.  
STATEMENT OF REMEDY: In the event that the product does not conform to this  
warranty at any time while this warranty is in effect, warrantor will either, at its  
option, repair or replace the defective unit and return it to you without charge for  
parts, service, or any other cost (except shipping and handling) incurred by  
warrantor or its representatives in connection with the performance of this  
warranty. Warrantor, at its option, may replace the unit with a new or refurbished  
unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND  
ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF  
AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION  
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS  
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT  
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some  
states do not allow this exclusion or limitation of incidental or consequential  
damages so the above limitation or exclusion may not apply to you.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state. This warranty is void outside  
the United States of America and Canada. PROCEDURE FOR OBTAINING  
PERFORMANCE OF WARRANTY: If, after following the instructions in the  
owner's manual you are certain that the Product is defective, pack the Product  
carefully (preferably in its original packaging). Disconnect the battery from the  
Product and separately secure the battery in its own separate packaging within  
the shipping carton. The Product should include all parts and accessories  
originally packaged with the Product. Include evidence of original purchase and a  
note describing the defect that has caused you to return it. The Product should be  
shipped freight prepaid, by traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
17  
 
At Uniden, we'll take care of you!  
Thank you for purchasing a Uniden product. if you have any  
questions or problems, please do not return this product to the  
place of purchase.  
Our customer care specialists are here  
to help you! Visit our website at  
Having  
www.uniden.com or call our Customer  
trouble?  
Service Hotline at 1-800-297-1023  
during regular business hours. *  
To order headsets, additional handsets,  
replacement batteries, or other  
accessories, visit our website at  
Need a part?  
www.uniden.com or call  
1-800-554-3988 during regular business  
hours. *  
If you need special assistance due to a  
Help for our  
disability or have questions on the  
customers  
accessibility features of this product,  
with special  
needs  
please call 1-800-874-9314 (voice or  
TTY).  
* Central Standard Time. Detailed customer service hours are  
May be covered under one or more of the following U.S. patents:  
4,797,916  
5,533,010  
5,661,780  
5,732,355  
5,787,356  
5,912,968  
5,987,330  
6,314,278  
6,782,098  
6,901,271  
5,426,690  
5,574,727  
5,663,981  
5,754,407  
5,794,152  
5,915,227  
6,044,281  
6,418,209  
6,788,920  
6,907,094  
5,434,905  
5,581,598  
5,671,248  
5,758,289  
5,801,466  
5,929,598  
6,070,082  
6,618,015  
6,788,953  
6,914,940  
5,491,745  
5,650,790  
5,696,471  
5,768,345  
5,825,161  
5,930,720  
6,125,277  
6,671,315  
6,839,550  
6,953,118  
5,493,605  
5,660,269  
5,717,312  
5,893,034  
5,864,619  
6,253,088  
6,253,088  
6,714,630  
6,889,184  
7,023,176  
Other patents pending.  
18  
 
 
UUZZ01616BZ(0)  
 

Toshiba DVD Player SD 260E ES User Manual
Triarch Indoor Furnishings 33194 User Manual
Tripp Lite Network Cables S054 31I User Manual
Troy Bilt Tiller 664Dpony User Manual
True Fitness Bicycle Z7 User Manual
Univex GPS Receiver TRAX353 User Manual
Vestax Musical Instrument Mixing Controller User Manual
ViewSonic Car Video System VS12302 User Manual
Viking Refrigerator F20497 User Manual
Vizio Flat Panel Television XVT472SV User Manual