Toshiba Network Card TOS SN 1 User Manual

TOS-SN-1  
Extended Panel Operation Manual  
Introduction  
The “Extended Panel (TOS-SN-1)” for TOSVERT series inverter can be used for  
programming or monitoring, but does not contain internal memory. Please read the section  
regarding safety precaution in the “Extended Panel Operation Manual” before powering up your  
inverter. When using the External Panel, the display and adjustment of the inverter can be  
controlled remotely for up to 5 meters.  
This operation manual gives explanations of how to connect and program the “Extended  
Panel.” Please read the entire manual carefully before attempting to control your inverter via the  
Extended Panel. In addition, the manual can be used for future operator maintenance and  
inspection. The Extended Panel is provided with a connection cable between the inverter and  
Option Unit. Any of the cables below may also be used with the TOS-SN-1  
Part number of connection cable between the inverter and Option Unit  
Cable Length  
1.5m  
3m  
5m  
CAB0011  
CAB0013  
CAB0015  
Connections and Start Up  
CN1  
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192  
 
TOS-SN-1  
Names and Functions  
The names and functions of main parts of the Extended Panel are shown in the following figure.  
Even though the Extended panel is connected, the inverters panel remains available.  
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192  
 
TOS-SN-1  
Mounting  
Mount the extended panel (TOS-SN-1) in front of the panel board as mentioned below. Make  
an opening for mounting the extended panel in front of the panel board. Refer to “Figure 1.  
Panel cut dimensions”, for proper dimensions and then set the extended panel in the opening  
with M3 screws, nuts and spacers supplied as accessories. Refer to “Figure2. Mounting of  
extended panel” for dimensions of extended panel.  
Figure1. Panel cut dimensions (Unit: mm)  
Dimensions  
Figure2. Dimensions of the extended panel (unit: mm)  
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192  
 
TOS-SN-1  
Specifications  
Item  
Specification  
Part number  
TOS-SN-1  
Service  
Indoors. Altitude of less than 1000m (3280ft)  
Environment  
Must not be exposed to direct sunlight, subject to corrosive  
and/or explosive gases, vapor, dust, chips, cutting oil, grinding  
agent, etc.  
Ambient  
Temperature  
Storage  
From -100C to+500C (140C to 1040C)  
From -250C to+650C (-120C to1490C)  
Temperature  
Relative humidity  
20% to 90%  
(no condensation allowed)  
5.9m/s2 or less  
Vibration  
Cool system  
Self-cooling  
Protection Functions  
If you receive an error code while operating the drive from the extended panel, refer to the table  
below for solutions to resolve the error.  
Error Code  
гAN.E  
Details  
RAM error  
ROM error  
CPU error(watch  
dog)  
Causes and Remedies  
Reset the extended panel. If the same indication  
appears again after resetting, ask the dealer to  
investigate the cause  
гON.E  
CPU.E  
The error status will automatically be cancelled by  
Communication recovery of normal communication status. Check  
CON.E  
error  
connection of the communication cable. After checking  
connection of the communication cable, reset the  
extended panel. If the same indication appears again  
after resetting, ask the dealer to investigate the cause.  
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192  
 
TOS-SN-1  
Safety Precautions  
Located on the inverter and in its instruction manual, important information is contained for  
preventing injuries to users and damages to assets and for proper use of the device. Read the  
instruction manual attached to the inverter along with this manual for complete understanding of  
the safety precautions and adhere to the contents of these manuals.  
Handling  
Danger  
Never disassemble, modify or repair the product.  
Never Disassemble  
Prohibited  
Disassembling the inverter could cause electric shocks, fire  
or  
injuries. For repairs, call your agency.  
Do not remove connectors when the power is on. It could  
lead to  
electric shocks.  
Do not put or insert foreign objects such as waste table, bars,  
or wires into the product. It could lead to electric shocks or  
fire.  
Do not splash water over the product. It could lead to electric  
shocks or fire.  
Power off the inverter before removing wires.  
Turn off the power immediately if any abnormalities such as  
smokes, smells or abnormal noise are found. Neglecting any  
of these conditions could lead to a fire. For repairs, call your  
agency.  
Mandatory  
Transportation and installation  
Danger  
Do not install or operate the inverter if it is damaged or any  
part is missing from it. Operating the inverter in a defective  
condition could lead to electric shocks or fire. For repairs,  
call your agency.  
Prohibited  
Do not put any inflammable material near the product. It  
could ignite a fire if the product sparks because of a  
breakdown.  
Do not install the product where it could be splashed with  
water and the like. It could lead to electric shocks or fire.  
The product must be used under environmental conditions  
prescribed in this operation manual. Using the product under  
conditions not specified by the operation manual could lead  
to breakdown.  
Mandatory  
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192  
 
TOS-SN-1  
Cautions  
Prohibited  
Do not install the product in any place subject to vibrations or  
it could fall. Otherwise it can cause injury to people.  
Operation  
Danger  
Do not wipe the body with a wet cloth. It could lead to electric  
shocks.  
Prohibited  
Do not pull on the cable. It could cause damage or errors.  
About disposal of the product  
Cautions  
Mandatory  
Dispose of the product as an industrial waste.  
Cautions on use  
Cautions  
Avoid installation locations that may be subjected to rapid  
changes in ambient temperature and/or humidity.  
Route the control wires separate from the inverter  
input/output power wiring. When disconnecting connection  
cable, make sure to hold its connector with care not to give  
unreasonable stress to the cable and the unit.  
The optional cable connector has locking pawls to prevent  
disconnection at the inverter and Option Unit. Disconnect the  
connector by pressing the pawl with finger to unlock.  
Mount the Option Unit securely on the panel, otherwise it  
could fall and cause malfunction or breakdown.  
Connect an electromagnetic contactor or something similar  
between the inverter and the power source to secure an  
external control of emergency to stop operation.  
Γ For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192  
 

Texas Instruments Stereo Amplifier SLOU023A User Manual
Tiffen Camera Accessories Camera Filters User Manual
Timex Watch 865 095000 User Manual
Toshiba Cash Register MA 1100 100 SERIES User Manual
Toshiba Printer B 670 SERIES User Manual
Tripp Lite Network Cables N002 025 BK User Manual
ViewSonic Car Video System VA2046a LED User Manual
ViewSonic Projector PJ562 User Manual
Walker Snow Blower 5600 20 User Manual
Weed Eater Lawn Mower 178078 User Manual